Fluid & Gas Flow Equipment

Abrasive Blast Equipment

Blast & Wash Systems Exhibiting at the AmShow in Rochester, NY

Blast Wash Systems will be exhibiting at theÂ-  AmCon 2016 Show September 21st & 22nd in Rochester, New York We invite you to see our equipment in action - parts washing equipment, weld fume extractor, downdraft table and blast cabinet. Blast & Wash Systems is the largest distributor of finishing equipment in the region. Blast & Wash Systems offers automated finishing equipment to...

Read More »
RapidVap® N2 Dry Evaporation Systems Offered by Terra Universal
Evaporators

RapidVap® N2 Dry Evaporation Systems Offered by Terra Universal

Fullerton, CA – Evaporate samples for lab analysis using the efficient RapidVap N2 Dry Evaporation System manufactured by Labconco. The evaporator uses a gentle combination of heat, vortex motion and process gas, typically nitrogen, to quickly dry samples. Nitrogen is a common drying agent, and the stream of gas above the sample speeds-up evaporation. RapidVap features a unique cooling block...

Read More »
Wheels

Weiler Upgrades Roughneck® and Wolverine® Stringer Bead Wheels

Stringer Bead wheels have been re-engineered for unmatched cleaning, increased life, effortless operation and better value CRESCO, Pa. — Weiler Abrasives Group, a leading provider of abrasives, power brushes, and maintenance products for surface conditioning has announced the upgrade of its Roughneck and Wolverine 4-inch Stringer Bead wheels. The Stringer Bead wheels have been re-engineered to...

Read More »
Self-Cleaning Hood System drastically reduces grease build-up.
Scrubbers

Self-Cleaning Hood System drastically reduces grease build-up.

By cleaning both sides of filters in place along with inside of exhaust plenum, Accurex GWAE Auto Scrubber Hood System eliminates need for daily removal and cleaning. Product features 2 in. gravity drain that captures grease from pitched grease trough, single control panel that controls multiple hood sections or duct sumps, and tool-less access panels that facilitate maintenance and inspection....

Read More »
Peristaltic Pump Vs. i-FILL® Technology
Sponsored

Peristaltic Pump Vs. i-FILL® Technology

Intellitech's advanced i-FILL® pumps are used by companies working in some of the world's most demanding sectors, delivering innovative, highly accurate and repeatable results, ensuring ultimate reliability and ease of use for all of our clients.

Read More »
Probes

Board Probes are available for routine AFM measurements.

Suitable for nearly all routine atomic force microscope (AFM) measurements, SurfRider™Ã‚- Econo Board™ probes are also suited for training or education and can be used for many advanced modes. Latter includes tapping, force modulation, contact, and nanoelectrical and nanomechanical characterization modes. Suited for all AFM brands and models, probes come in 8 PtIr coated and...

Read More »
Fittings

Viega Begins Producing MegaPress® Fittings in New U.S. Facility

New manufacturing facility in McPherson, Kan. has capacity to produce millions of Viega MegaPress and MegaPressG fittings. WICHITA, Kan. - Viega announced that production of Viega MegaPress® and MegaPressG carbon steel press fittings began at its manufacturing facility in McPherson, Kan. Viega broke ground for the 80,000-square-foot manufacturing addition to its McPherson campus in November...

Read More »
Pipes

Piping Systems support plumbing and HVAC applications.

Comprised of Climatec™ for hydronic heating and Watertec™ for potable water, Asahitec™ PP-RCT Systems are manufactured with patented Fibercore™ technology, which minimizes expansion and contraction by up to 75%. Middle layer consists of mix of short fiberglass strands and PP-RCT, which is isolated by inner and outer layer of solid PP-RCT. Systems include 20–125 mm molded socket fusion...

Read More »
Communication Systems

RS-485/RS-422 Receivers support high-speed communications.

Available in 5- and 6-pin TSOT23 packages with 3 x 3 mm footprint, Models XR33180, XR33181, XR33183, and XR33184 feature 52 Mbps data rates, 15 ns propagation delay, and 2 ns max receiver skew. XR33184 includes low voltage logic pin that eliminates need for level shifter when interfacing to MCUs or FPGAs that run off lower supply voltages. Operating from -40 to +125°C with 3.3 or 5 V...

Read More »
Piezo Stage meets requirements for SR microscopy applications.
Positioners

Piezo Stage meets requirements for SR microscopy applications.

PInano® II high-resolution XY/XYZ multi-axis positioning systems include piezo scanner, software, and digital controller. In addition to piezoresistive and capacitive sensor versions, high-speed version is available. General features include millisecond step/settle, 0.8 in. profile, and 200 µm travel ranges. Digital servo piezo controller supports wave generator, data recorder, auto...

Read More »
Sundyne Ultra-Low NPSHr, High-Flow Pump Finds Midstream Success
Pumps

Sundyne Ultra-Low NPSHr, High-Flow Pump Finds Midstream Success

ARVADA, Colo. - Sundyne, a leader in the design and manufacture of highly-engineered centrifugal pumps and integrally geared compressors for use in the global oil and gas production, refining, petrochemical, and chemical industries, announces an early application success for their recently introduced LMV-803Lr ultra-low NPSHr, high-flow pump. A long-time Sundyne customer recently ordered 9 total...

Read More »

All Topics