Fluid & Gas Flow Equipment

Position Monitor suits clam shell bucket applications.
Sensors / Detectors / Transducers

Position Monitor suits clam shell bucket applications.

Compatible with electrically, pneumatically, hydraulically, or manually driven shafts, SG1000E measures rotary movement up to 6 turns as well as repetitive linear movement. It come in explosion-proof NEMA 4X enclosure and suits rotary applications that require full-scale rotation and up to 6 full turns with full-scale sweep as small as 5.6°. Monitor can measure rotational position with...

Read More »
Transition Fitting eliminates need for junction box.
Fittings

Transition Fitting eliminates need for junction box.

Mighty-Merge(TM) 4157-DC transition fitting securely transitions 14/2 to 10/3 AC/MC cables to EMT conduit without damaging conductor insulation. System installs by removing desired length of armor that will allow for exposed conductors to reach device box or enclosure, and by tightening screws for cable between armor convolutions and for ¾ in. EMT. It is suited for new construction and...

Read More »
Chip Vacuum fits 30 gallon drums.
Cleaning Equipment

Chip Vacuum fits 30 gallon drums.

Powered by compressed air, Model 6193-30 Chip Vac creates direct flow action that effectively moves metal, wood, or plastic chips into user's 30 gallon drum. Dusty materials such as absorbents are trapped by 0.1 micron filter bag to keep surrounding air clean. Moving from drum to drum to keep different materials separate for recycling, Chip Vac is suited for cleaning chips from fixtures, floors,...

Read More »
Shorter Shaft Electric Drum Pump is Ideal for Smaller Containers
Pumps

Shorter Shaft Electric Drum Pump is Ideal for Smaller Containers

Transferring liquids, such as oils, acids and detergents from small drums, buckets and carboys is often done manually, where even if correct procedures are followed, can be a time-consuming and messy process. An easier and more efficient method is by using light and compact motor driven drum pumps, such as those available from pumping specialists MICHAEL SMITH ENGINEERS. They offer the range of...

Read More »
Minimize Overspray, Waste and Quality Problems in Coating, Lubricating and Dispensing Operations
Sprayers

Minimize Overspray, Waste and Quality Problems in Coating, Lubricating and Dispensing Operations

AutoJet® Model 1550 Modular Spray Systems from Spraying Systems Co. ensure accurate, precise placement of the liquid being sprayed to minimize waste and maximize quality in a wide range of operations. The system provides automatic on/off control of electrically- and pneumatically-actuated spray nozzles with greater precision than manual operation or devices such as solenoid valves....

Read More »
Conduit Elbow reduces parts stock via 4-in-1 functionality.
Fittings

Conduit Elbow reduces parts stock via 4-in-1 functionality.

Functioning as 4 elbows in one, Universal Conduit Elbow replaces LL, LR, LB, and C conduit bodies for most applications. Radius is same as conduit itself and facilitates pulling of wire since fiber optic cable can be run through Â-¾ in. system. With wire-fill rating of 40%, product facilitates negotiation of angles and eliminates need for sharp bends. UL-Listing as electrical box allows...

Read More »
Linear Positioning Stages feature moving magnet voice coil.
Positioners

Linear Positioning Stages feature moving magnet voice coil.

Measuring 4.0 x 3.5 x 3.52 in., Linear Positioning Stages feature ±0.11 in. stroke length from center of travel home position, resolution from 50 nm, and high acceleration to 5 g's. There are no moving cables or wires as coil assembly and linear encoder head are stationary. Made of anodized aluminum, zero cogging stages can be mounted horizontally or vertically and are suited for mirror...

Read More »
EATON Awarded $1.3 Million Filter Contract
Water Filters

EATON Awarded $1.3 Million Filter Contract

TO PROVIDE MECHANICALLY CLEANED DCF FILTERS TO GTEC/U.S. ARMY CLEVELAND ... Diversified industrial manufacturer Eaton Corporation today announced that it has secured a $1.3 million contract to provide Global Defense Technology & Systems, Inc. (NASDAQ:GTEC), of Frederick, Maryland, and the US Army in Afghanistan, 184 mechanically cleaned DCF800 Filters. These filters will be used in GTEC's...

Read More »
Purifiers

Severn Trent Services - Apliclor Provides Drinking Water Treatment Station in Madrid, Spain

BARCELONA, Spain. - Severn Trent Services - Apliclor, a leading supplier of drinking and wastewater treatment solutions in Spain, has designed and supplied new filtration and disinfection equipment for the Cadalso de los Vidrios drinking water treatment station, owned by the public company Canal de Isabel II. The upgraded facility, which came into operation in August, serves the needs of some...

Read More »
HTB Eliminator(TM) Handles over 1,000,000 Impulse Cycles
Hose

HTB Eliminator(TM) Handles over 1,000,000 Impulse Cycles

Ravenna, OH - HTB Eliminator(TM) Hose, from the Parflex division of Parker Hannifin, is designed for high pressure hydraulic applications. Offering superior impulse performance, it exceeds impulse requirements of SAE 100R9 and SAE 100R12 by 50% and the MSHA approved rubber cover is accepted in underground mining operations. Because of high quality materials and a unique manufacturing process, HTB...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers