Fluid & Gas Flow Equipment

VQuad™ Probe HD Device supports up to 12 independent devices.
Probes

VQuad™ Probe HD Device supports up to 12 independent devices.

Supporting multiple physical interfaces for connection, VQuad™ Probe HD Device offers remote accessibility via two on-board GBit Ethernet interfaces. Compatible with NB and WB (HD) audio, unit comes with optional touchscreen monitor that can be connected to device via USB. Enhanced to support Data Testing over any IOS or Android mobile device, VQuad™ can send/receive voice files over...

Read More »
Motorized Impellers come with capacity of 8,095 cfm.
Impellers

Motorized Impellers come with capacity of 8,095 cfm.

Available in voltage ranges of 200-240V three phase, 280-480V three phase, and 200-277V single phase, Motorized Impellers are made of glass-fiber polypropylene material. Suitable for electronic cabinet cooling, clean room modules, air filtration systems, heat exchangers and air-handling unit applications, units are operated in temperature ranges from -4 degrees F to 104 degrees F. Equipped with...

Read More »
NRFit™ Connectors and Caps meet ISO 80369-6 standard.
Caps

NRFit™ Connectors and Caps meet ISO 80369-6 standard.

Designed for neuraxial applications such as spinal and epidural procedures, NRFit™ Connectors and Caps are BPA and latex-free medical-grade acrylic resin. Connectors are available to fit 0.083 in. or 0.122 in. outer diameter tubing whereas caps come with vented and non-vented designs. Suitable for small-bore connecting applications, connectors feature ergonomic wings on the female connectors...

Read More »
RSB5152 USB 2 Channel 5Amp SPDT Relay Module
Modules

RSB5152 USB 2 Channel 5Amp SPDT Relay Module

J-Works. Inc has start shipping RSB5152 series of single pole, double throw (SPDT) 2 channel 5 Amp relay modules controlled over the USB. The SPDT relay outputs provide host USB control between common line and normally open or closed relay contacts using on-board screw type terminals. The relays are rated at 5A @ 250VAC, 24VDC. According to Paul Ryan, Applications Engr at J-Works "This small form...

Read More »
Peristaltic Pump Vs. i-FILL® Technology
Sponsored

Peristaltic Pump Vs. i-FILL® Technology

Intellitech's advanced i-FILL® pumps are used by companies working in some of the world's most demanding sectors, delivering innovative, highly accurate and repeatable results, ensuring ultimate reliability and ease of use for all of our clients.

Read More »
Preview for Seica Inc for Semicon West - Semicon West - 7/11/17 - 7/13/17 - San Francisco, CA - Booth #7709
Testers

Preview for Seica Inc for Semicon West - Semicon West - 7/11/17 - 7/13/17 - San Francisco, CA - Booth #7709

Salem, New Hampshire USA, July 2017 - Seica will be showcasing the new Industrial Monitoring solution at this exhibition. The solution has been conceived with a special focus towards energy saving requirements and predictive monitoring of events, in compliance with the principles of Industry 4.0. Our system on the booth, the Pilot 4DV8 will integrate Seica’s industrial monitoring hardware, and...

Read More »
Model 888VFD Check Valve is suitable for ANSI 150# or 300# mounting.
Valves

Model 888VFD Check Valve is suitable for ANSI 150# or 300# mounting.

Available in 2 – 4 in. with 316 Stainless Steel guide and seat with EPDM elastomer disc standard, Model 888VFD Wafer Style Check Valve comes with double guided spring loaded poppet. Minimizing water hammer using field exchangeable internal system, unit is suitable for booster pump systems, mechanical contractors, irrigation systems and HVAC liquid services.

Read More »
Filters

Industrial Filtration System Enhances Product Quality of Liquid Emulsions

Self-cleaning industrial liquid filters provide robust and reliable filtration system for Flexcrete's new hygienic liquid membranes Flexcrete, manufacturers of high performance coatings and technical mortar solutions, required an in-line industrial filtration solution to meet increased demand for their liquid emulsions. After a consultation with Russell Finex at an exhibition, Flexcrete were...

Read More »
Tubes and Tubing

Eldon James shelf-life Determination for Products Produced with Flint Hills Resources 13R9A Polypropylene Random Copolymer and Tubing Produced with FX Polymer

Denver, Colorado – August 12, 2016 – Eldon James Corporation – a leading, U.S. based manufacturer of plastic tubing and fittings – announced the successful results of accelerated aging test results for their polypropylene fittings and FX polymer tubing. The tests were intended to define an extended shelf-life for both the polypropylene fittings and FX series tubes ensuring product...

Read More »
Xcavator™ Grinding Wheels minimize grinding time.
Wheels

Xcavator™ Grinding Wheels minimize grinding time.

Incorporating Comfort Max™ Technology for minimizing vibration, Xcavator™ Grinding Wheels are tested on tungsten carbide and tempered steel metals. Featuring UHR (ultra-high removal) multi-layer manufacturing technology that prevents edge falking, units is suitable for use on steel and stainless steel.

Read More »
Thread Chaser Holders feature chipbreaker geometry.
Holders

Thread Chaser Holders feature chipbreaker geometry.

Featuring carbide-pin locating systems, patented pocket seat surface patterns and high-pressure coolant delivery, Thread Chaser Holders offer insert positioning, superior rigidity and quicker chip evacuation. Compatible for tooling with Capto C6, Capto C8 or Steadyline GL50 connections, unit maintains tight insert grip during threading process. Suitable for external and internal threading...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics