Magnetic-Drive Pump provides flows to 225 gpm.
Sealless, self-priming Series PMSP comes in 3, 5, and 7Ã-½ hp. Available in polypropylene/PVDF and high-temperature PVDF materials, it is recommended for corrosive wastes at temperatures to 210Ã-
Read More »
Slide Rails can be bracket-mounted on horizontal members.
Chassis/cabinet-mounted slide rails are available in standard and rugged versions. They are offered with locking and non-locking options, withstand shock and vibration in harsh environments, are 10 mm thick, and handle up to 220 lb. Locking-versions include quick-release levers and self-release versions for unlocking. Slide rails come in 3 sections: outer-mounting bracket to cabinet,...
Read More »
Motorized Damper handles air flows from 15-4,000 cfm.
With IRIS-M motorized damper, minimum and maximum airflows are measured within -±5% by using product's pressure port and altered by means of actuator adjustment screws. Unit varies airflow in response to 0-10 Vdc or 4-20 mA signal to control temperature, humidity, or ventilation rate. External switch fully retracts damper for duct cleaning. Made from galvanized steel with neoprene seals, 6 sizes...
Read More »
Handling System improves flow of cohesive powders.
Powder Handling System consists of Type 3 bulk bag discharger, fitted with Hogan bin discharger and aero-mechanical conveyor. By using pneumatic massage paddles and bag tensioning device, Type 3 improves material flow out of bulk bag with no dramatic degradation. Aero-mechanical conveyor creates moving current of air in which powder flows, and Hogan bin discharger acts as flow promoter by using...
Read More »
A Guide to Quality Control of the SMT Process
The printed circuit board (PCB) manufacturing process begins with cutting-edge equipment capable of accurately picking and placing up to 40,000 components per hour. This innovative equipment keeps error rates extremely low, and those defects that do occur are quickly caught by sensitive laser and optical inspection equipment.
Read More »
Valve performs three functions.
Triple Duty-® Valve consists of calibrated balance valve, which provides precise flow with 8-9 turns; non-slam check valve, which assures positive shut-off without water hammer or valve chatter; and shut-off valve which includes memory button that allows entire valve to be returned to initial balanced position after shut-off. Triple Duty-® Valve comes in straight pattern flange design, and...
Read More »
Self-Priming Thermoplastic Pumps are magnetically driven.
Able to handle corrosive and aggressive fluids, PG/CGM heavy duty, horizontal end suction centrifugal pumps are constructed with thick-sectioned, solid thermoplastic components. All fluid contact structural components are molded from solid homogeneous thermoplastics, which are chemically inert and abrasion-resistant. Products handle temperatures to 275Ã-ºF and flows from 5-175 gpm at heads to...
Read More »
Pneumatic Valve System offers modular flexibility.
Moduflex(TM) valve system allows users to select from 0.32 and 0.80 Cv valve sizes and assemble dual 3/2, 4/2, and 4/3 configurations in one island meet application requirements for up to 4 in. actuator bore sizes. Each valve size has 2.5 mm stroke, 14 mm piston diameter, and lapped ceramic plate and slide arrangement. Single tie-rod connection enables users to add or delete valves and change...
Read More »
Oil-Mist Air Cleaner provides 3-stage filtration process.
Machine-mounted Model OM550DD cleans up to 600 cfm of oil-mist laden air. It includes built-in oil deflector, angle inlet plenum for coolant drainage, and slotted rails for easy filter installation. Heavy-duty cabinet withstands abuse, and small size allows unit to fit almost anywhere. Floor stand, HEPA filters, minihelic gauge, and Mist X filter are optional.
Read More »
Duplex Filter suits continuous process applications.
Duplex Filter is designed around two MAXILINE SE 12-bag filter housings linked with butterfly valve control assembly. System operator can switch flow from one filter housing to the other for filter changeout without shutting off flow. QIC-LOCKÃ-® cover with spring assist allows operator to open or close cover in 15 seconds with only finger tip effort. Duplex Filter is offered in carbon steel...
Read More »
Diaphragm Pump Head starts in correct position every time.
Safe from over-pressure, vacuum, and low suction conditions, LEWA Series M900 has PTFE sandwich diaphragm that handles pressures up to 5,800 psig, with 10 psi suction lift, and clean flow path. Diaphragm protection system keeps diaphragm in rear position at rest. Able to handle difficult fluids up to 100,000 CPS, product is suited for flows from 0.26-2,600 gph. Product includes diaphragm...
Read More »
How SpinSelect Can Save You Time and Money
Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.
Read More »
