New 2SA Vertical Sump Pump is Available in Single or Duplex Type
Allied Pumps’ 2SA Vertical Sump Pump is designed for discharge of drainage, seepage water, effluent and boiler blow down. The unit comes with steel and cast iron basins, grouting frames and pit covers. For applications containing corrosive liquids such as alkalies and acids, units are constructed from special alloys.
Read More »New Radial Loc-N-Load™ Fixture Plate Uses CMM Palletization Features
Radial Loc-N-Load™ Aluminum Fixture Plate is available in 12, 18 or 30 in. rail and plate combinations with 8 in. diameter and 1/2 in. thick black hard anodized aluminum with 1/4-20 threaded holes. The plate comes with laser marked rings for simplifying process of aligning parts. Unit interlocks magnetically and can be installed on all CMMS. The fixture plate allows creation of multiple...
Read More »New Radial Loc-N-Load⢠Fixture Plate Uses CMM Palletization Features
Radial Loc-N-Load™ Aluminum Fixture Plate is available in 12, 18 or 30 in. rail and plate combinations with 8 in. diameter and 1/2 in. thick black hard anodized aluminum with 1/4-20 threaded holes. The plate comes with laser marked rings for simplifying process of aligning parts. Unit interlocks magnetically and can be installed on all CMMS. The fixture plate allows creation of multiple...
Read More »Lift and Seal™ Container Discharger Now Features Carbon Steel NEMA 4 Control Enclosure
Lift and Seal™ Container Discharger is designed to move material loaded at the floor level to hopper. Unit comes with continuously welded tubular steel frame, rigid conduit and hydraulic lines. The pour hood consists of air actuated butterfly valve. Discharger is equipped with 5 GPM hydraulic system.
Read More »The Industrial Vacuum Hoses Buying Guide
Having the right industrial vacuum hose and tools is important for completing tasks properly and efficiently. The right materials should be able to withstand demanding conditions as well as maintain their durability and flexibility.
Read More »Lift and Seal⢠Container Discharger Now Features Carbon Steel NEMA 4 Control Enclosure
Lift and Seal™ Container Discharger is designed to move material loaded at the floor level to hopper. Unit comes with continuously welded tubular steel frame, rigid conduit and hydraulic lines. The pour hood consists of air actuated butterfly valve. Discharger is equipped with 5 GPM hydraulic system.
Read More »New RX-V385 AV Receiver is Equipped with Proprietary YPAO™ Calibration Technology
RX-V385 AV Receiver comes with CINEMA DSP™ technology for support of Dolby® TrueHD and DTS-HD Master Audio™ HD audio options. YPAO™ calibration automatically adjusts audio parameters by analyzing room acoustics. Unit features built-in Bluetooth®, 4K Ultra HD video with HDCP 2.2, high dynamic range (HDR), BT.2020 compatibility and 5.1-channel amplifier design. RX-V385 is equipped with...
Read More »New RX-V385 AV Receiver is Equipped with Proprietary YPAO⢠Calibration Technology
RX-V385 AV Receiver comes with CINEMA DSP™ technology for support of Dolby® TrueHD and DTS-HD Master Audio™ HD audio options. YPAO™ calibration automatically adjusts audio parameters by analyzing room acoustics. Unit features built-in Bluetooth®, 4K Ultra HD video with HDCP 2.2, high dynamic range (HDR), BT.2020 compatibility and 5.1-channel amplifier design. RX-V385 is equipped with...
Read More »Latest M40 Connectors from Harwin are Suitable for Prototyping or Small Volume Runs
Harwin’s new M40 connectors come with phosphor bronze contacts rated for up to 1A. The connectors are lightweight and have low profile at 1mm pitch units. Available in both single and double row options, the connectors can be mounted either vertically or horizontally. Characteristic features are 50 mate/un-mate cycles, insulation resistance of 100MΩ, and operational temperature range of...
Read More »Latest M40 Connectors from Harwin are Suitable for Prototyping or Small Volume Runs
Harwin’s new M40 connectors come with phosphor bronze contacts rated for up to 1A. The connectors are lightweight and have low profile at 1mm pitch units. Available in both single and double row options, the connectors can be mounted either vertically or horizontally. Characteristic features are 50 mate/un-mate cycles, insulation resistance of 100MΩ, and operational temperature range of...
Read More »Analog Devices' Regulator Now Comes in Wide Voltage Range
Power by Linear™ LTM4661 from Analog Devices Inc. is a low power step-up µModule® regulator measuring 6.25mm-by-6.25mm-by-2.42mm. It is a minimal design that uses a few capacitors and one resistor. Single-sided PCBs are less than 1cm² and dual-sided PCBs are 0.5cm². Input voltage ranges from 1.8V to 5.5V. Output voltage ranges from 2.5V to 15V. Other features include inrush current limit,...
Read More »More performance and functionality for Sinumerik 828D CNC
Siemens new SINUMERIK 828D ADVANCED, SINUMERIK 828D and SINUMERIK 828D BASIC sets the standard for productivity enhancements of turning and milling operations on standardized machines and simplify the automation of grinding machines. See our video to learn all about it.
Read More »