New: Buy Now on Thomas and Pay Over Time with Credit Key   Learn More

Fluid & Gas Flow Equipment

Proportional Valves feature close tolerance spools.

Proportional Valves feature close tolerance spools.

DFW proportional, directional control valves can be used for reproducible control of actuator speed in rapid/slow speed profiling as well as smooth acceleration and deceleration. D1FW features flow rating to 12.5 gpm, while D3FW has flow rating to 45 gpm. Connection options include conduit boxes with wire leads, flying leads or DIN-type connectors.

Read More »
Precision Ground Insert has 3F geometry.

Precision Ground Insert has 3F geometry.

Precision ground insert with 3F geometry for stainless steels, aluminum, high-temperature alloys and steels features periphery ground edges for accurate profiling and indexability. Additional features include light hones and positive geometry. Radii are available for light depths of cut and producing small corner radii. PVD grades offer layer of lubricity for reduced coefficient of friction....

Read More »
Hoses are ideal for half-bend radius applications.

Hoses are ideal for half-bend radius applications.

Models 351TC and 351ST abrasion-resistant hoses, designed for 1/2 SAE 100R1 minimum bend radius applications, are available with MSHA-accepted Tough Cover or Super Tough polymeric cover. Both offer 4,000 psi constant working pressure in sizes that range from 1/4 in. to 3/4 in. I.D. They are constructed of oil-resistant, Nitrile-based synthetic rubber tube, with 2 braids of high-tensile steel wire...

Read More »
Miniature Relays consume very little power.

Miniature Relays consume very little power.

Model AZ852 and AZ853 relays meet Bellcore's 2.5 kV and FCC Part 68 1.5 kV surge voltages standards, plus IEC 60950, UL1950 and EN60950 spacing and high breakdown voltage requirements. Both consume only 79 mW power at pick-up, have stable contact resistance for signal or low-level switching, and are epoxy-sealed for automatic processing. Versions with latching coil and/or SMT enclosure are...

Read More »
Choosing the Right Material for Your Project
Sponsored

Choosing the Right Material for Your Project

When choosing an appropriate metal material, the range of options is so broad that selecting the correct material for your unique application can be challenging. Different metals have characteristics that can affect weldability, ductility, and formability. Our new eBook outlines the unique properties and applications of popular metals including: Stainless Steel Brass Aluminum Copper Titanium

Read More »
Vane Pump handles high-volatility fluids.

Vane Pump handles high-volatility fluids.

Magnatex-® MPT Regenerative Turbine Vane Pump is a magnetically driven, sealless pump featuring a regenerative turbine vane impeller and rare earth Neodymium magnets for synchronous drive with no slippage. Close-coupled design eliminates alignment problems. Pump is capable of operation under 2 ft of static NPSH at line pressures up to 100 psi and flow rates of 2-3 gpm.

Read More »
Butterfly Valves operate up to 200 psig.

Butterfly Valves operate up to 200 psig.

Resilient seated butterfly valves offer phenolic backed cartridge seat to provide full rated dead-end service on all lug pattern valves. Torque values are minimized by use of 4 Teflon-® bushings properly aligned down blowout proof shaft. Valves are manufactured with cast iron bodies; ductile iron nickel plated, aluminum bronze, or 316 SS discs; and Buna-N, EPDM, or Viton resilient seats. They...

Read More »
Adjustable Spray Nozzle spray coats powders and liquids.

Adjustable Spray Nozzle spray coats powders and liquids.

Air-operated, VDF adjustable spray nozzle enables field operators to control spray pattern, material powder through-put, or droplet size by varying compressed air flowing through unit. Tapered exhaust end provides consistent, uniform spray without clogging or clumping. Straight-thru design is self-cleaning. Nozzle operates safely under pressures from 10 to 60 PSI. It can produce fine mist or...

Read More »
Poppet Valves suit chemical dispensing applications.

Poppet Valves suit chemical dispensing applications.

SV72 Series 2-Way Inert Balanced-Poppet Solenoid Valves are designed to control corrosive fluids by isolating metal components from operating media. They employ 2 rolling diaphragms, which act as isolating barriers and balancing areas. Units offer pressure ratings of 100 PSIG with Cv of 4.0. SV72 valves, available with 115VAC, or 12 and 24 VDC coils, also feature inert construction, high flow and...

Read More »

All Topics