Fluid & Gas Flow Equipment

Lubrication System is designed for stamping presses.

Lubrication System is designed for stamping presses.

MicroCoat Lubrication System ensures that stock is always coated with even film of oil. It uses precision spray valves and LVLP (Low Volume Low Pressure) air to apply consistent coat of oil without dry spots, dripping or waste. Valve operation is regulated with pneumatically operated controller. Individual flow controls allow each valve's output to be adjusted independently and provide control...

Read More »
Steam Traps are suitable for large process applications.

Steam Traps are suitable for large process applications.

Magnum Series traps can be supplied with up to 18 bimetallic elements for hot condensate flows as high as 149,000 lb per hr. User can add or delete elements to match changing conditions. Bimetallic element uses both thermostatic and thermodynamic forces to ensure optimal plant control with no loss of live steam. 5 models are available for differential pressures up to 320 psi. Stainless steel...

Read More »
Isolation Valves suit tight-fit applications.

Isolation Valves suit tight-fit applications.

Model KV-2 inert, manifold-mount, solenoid-operated, two-way, normally closed isolation valves measure 6 mm in width. They have internal volumes of 10 microL at inlet and outlet and virtually zero dead volume. KV-2 valves feature all inert, internal wetted parts that are diaphragm isolated from coil assembly and other metallic parts. They are suitable for low volume fluidic systems.

Read More »
Diverter Valves handle pressures from 0 to 15 psig.

Diverter Valves handle pressures from 0 to 15 psig.

Diverter Valves are constructed with cast-iron body and end plates, with one-piece ductile iron rotor to hold critical dimensions and resist abrasion. Features include guarded actuators, ledge design that directs material, and triple protected bearings. Available control options include manual, air cylinder, air operated rotary actuators, and electric actuators. Diverter valves are available in...

Read More »
Valve Manifold features single mounting flange.

Valve Manifold features single mounting flange.

HM53 3-valve instrument manifold performs block, equalizing and vent requirements of differential pressure transmitter applications. It features non-rotating tip stem that provides tight, repeatable shutoff without galling or cross-scoring. Flange allows transmitter to bolt directly to manifold, which eliminates piping of excess tubing and nipples. HM53 is available in Hastelloy, Monel, Alloy 20,...

Read More »
Submersible Pumps do not require cleaning.

Submersible Pumps do not require cleaning.

N-Pumps employ open-type self-cleaning impeller, and while operating, each leading edge passes across sharp stationary relief-groove. This action ensures that rags, stringy materials and solids are sheared, cleaned from impeller and pumped away. Pumps maintain high level of efficiency, even in fluids with high solids and fibrous content.

Read More »
Safety Valves are suitable for use in piping systems.

Safety Valves are suitable for use in piping systems.

Figure 32, 42 and 42A Safety Valves feature stainless steel bases and discs, which provide long life and corrosion resistance. ASME Section I and VIII approved valves feature two-ring control for dependable pop action, seat tightness and repeatability. Cast bronze threaded valves with stainless steel base and disc are available in sizes ranging from 1/2 to 2-1/2 in. for pressures to 300 psi and...

Read More »
Connectors allow for off-axis insertion.

Connectors allow for off-axis insertion.

P-lok® connectors with integrated RADSOCK® socket technology provide positive-locking, spring-loaded coupling. 8 AWG P-lok contacts handle currents up to 69 A while size 4 AWG handle up to 120 A. Features include hyperbolic stamped grid configurations and Push-Pull systems. Thermal rise data after 500 cycles of durability is as follows: Size 8 AWG socket has 38°C at 46 A; Size 4 AWG socket has...

Read More »
Control Valve offers operating pressure up to 4,600 psi.

Control Valve offers operating pressure up to 4,600 psi.

Duplomatic DS5 directional control valve is a high-performance, five-chamber, NFPA-Standard valve with flow capacity to 40 gpm. Standard features offer a variety of spool configurations including a tandem center model capable of P to T flows of 27 gpm at 2,000 psi. Soft shift option can reduce operating shock and minimize valve and system failure. Coils are standard with plugs to accept DIN 43650...

Read More »
Gripping Rails with Clamps improve holding force.

Gripping Rails with Clamps improve holding force.

Pitbull Gripping Rails, with built-in clamps, maintain parallelism on non-ferrous or ferrous parts. Their asymmetric design allows for precision tolerances. Pitbull Gripping Rails also improve holding force of magnetic chucks when used to hold difficult or irregularly shaped ferrous workpieces. They allow users to add extra steel blocking to increase resistance against sliding, and can hold large...

Read More »
Sponsored

Triads JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.

Read More »

All Topics