Fluid & Gas Flow Equipment

Valve Controller Trio satisfies various requirements.

Valve Controller Trio satisfies various requirements.

IN-Series interface units include three controllers: IN-23 Y 3 Proportiontal Controller uses control action that progressively closes valve. IN-VCC valve current controller interfaces between process loops and control valves; it accepts 4-20mA control signal and uses this to regulate current applied to valve. Phasecut controls Staefa valves. It modulates valve using 0-20V phase-chopped output...

Read More »
Mini Flap Discs work with small air grinders.

Mini Flap Discs work with small air grinders.

POLIFAN(R) flap discs are available in sizes of 2 and 3 in. dia., in flat and conical styles, and in zirconia grain with grit range 24 through 120. Discs are able to grind and finish in one step, and stay aggressive throughout life of disc. Flap discs do not require backing, run cooler, and are suitable for use on all materials.

Read More »
Plastic Valve is stronger than UL requirements.

Plastic Valve is stronger than UL requirements.

Series 40 valve is molded from thermoplastic, has molded-in mounting bracket, survives 2,000 psi hydrostatic test, and has 300 psi maximum pressure rating. Suitable for pneumatic applications, it is available in all standard voltages including 24 VAC transformer power. Options include bracketless version, and full porting for three-way version. Valve is over molded with electrically and thermally...

Read More »

Electrofusion System joins company's piping systems.

MSA 250SE Electrofusion Joining Machine reduces installation time and costs when joining company's Fuseal II, Fuseal Squared and PPro-Seal Piping Systems. It uses bar code system with fusion parameters pre-programmed into machine to eliminate manual data entry and save installer time. Machine can fuse up to 4 joints at one time, operate from on-site or generator power, and has long cables to...

Read More »
Drum Pump has no moving parts.

Drum Pump has no moving parts.

Dual-Force Vac dual mode (fill/empty) drum pump is driven by filtered compressed air and Transvector air amplifier. It is capable of filling 55-gallon drum in less than 2 minutes. Pump features fast-turn switch that changes from vacuum to pump mode, automatic safety shutoff valve to prevent overflows, and relief valve that limits internal drum pressure to 8 PSIG. Unit is resistant to most...

Read More »

Milling Cutters work fast and efficiently.

Fix-Perfect aluminum milling cutter inserts have on-edge orientation and 34 deg positive rake angle. This geometry reduces insert edge buildup, improves tool life, and provides free cutting action that makes it possible to machine thin-walled parts. Inserts are available in uncoated, coated, and polycrystalline diamond versions.

Read More »
Base Slide offer high-speed precision.

Base Slide offer high-speed precision.

Series SM Base Slides are available in 8, 16, and 25 mm sizes, each with choice of three travel lengths. Modular mounting patterns on housing allows quick connect with Series STP Slides without need for transition plates. Optional porting through guide shafts allows saddle to move without flexing incoming air lines, available on 16 and 25 mm versions only. All units are 8 mm proximity switch...

Read More »
Reaction Vessel is stirred with magnetic-drive mixer.

Reaction Vessel is stirred with magnetic-drive mixer.

PC Series pre-packaged system includes contamination-free, leakproof magnetic-drive mixers. Vessel also features support stand, bottom flush valve, drive motor, rupture disc assembly, pressure gage, full-body spiral-baffled heating jacket or electric mantle heater, cooling coil, thermowell, and sample tube. It is available in 5, 10 and 20 gal, making it suitable for pilot-scale research and batch...

Read More »
Filter Vent is designed for dry bulk material bins.

Filter Vent is designed for dry bulk material bins.

Fast Filter Bin Vent is made of carbon steel, with solenoids pre-wired and plumbed. It has smart timer, DP transmitter and digital readout. Vents are available from 400-2200 CFM with 79 to 430 sq ft of filter media. Vents are shipped complete with galvanized cages, bag cups, venturis, and 16 oz. polyester (dacron) bags.

Read More »

Dry Air System can be placed at application.

Mini Pneudri Midas provides uninterrupted clean, dry, compressed air where needed. It incorporates high efficiency and particulate filters plus desiccant cartridge inside 1 module that lets contaminated, compressed air in and clean, dry air out. Unit is available with pressure dewpoints of -40° F or -100° F and flow rates of 3-20 scfm at 100 psig. Applications include CNC machines, CMMs,...

Read More »

All Topics