Fluid & Gas Flow Equipment

Gear Pumps suit chemical processing industries.

Gear Pumps suit chemical processing industries.

Chemsteel® rotary gear pumps, with flow rates from 1.5 to 30 GPM and duplex capabilities, feature keyed helical gearing for noise reduction. They are available with 15 shaft seal options. Gear combinations include Ryton®, 316 SS Alloy C, Teflon®, and PEEK®. Chemsteel® Pumps can be close-coupled.

Read More »
Hose Reel withstands harsh environments.

Hose Reel withstands harsh environments.

SSN700 series hose reel is made of 304 stainless steel frames, discs, and drums. It handles single hose from 1/4 to 1/2 in. ID, and has heavy duty spring motor with self-contained rewind power. Compact hose reel is mountable in tight spaces. Reel is suitable for applications such as washdown, chemical transfer, potable water, and fire protection in industrial settings.

Read More »
Interconnects are available with 10 to 100 I/Os.

Interconnects are available with 10 to 100 I/Os.

TFM and SFM Series .050 in. pitch interconnects are designed for applications requiring blind mating and/or high number of mating cycles. They are available with board spacings from .236 to 1.472 in. Three-finger Tiger-Eye contacts in SFM Series are stamped and formed with soft Beryllium Copper and heat-treated to optimize spring properties. Tiger Eye LITE three-finger contact is also available...

Read More »
Hand Pump is for use with 15 to 55 gallon drums.

Hand Pump is for use with 15 to 55 gallon drums.

Zee Line Hand Pump offers variable flow rates from 9.6 to 15 oz per stroke depending on linkage pin placement and fluid viscosity. It features carbon steel, brass, and plastic construction, and is able to handle rigorous use. Curved discharge spout with garden hose threads allows pump to be used with standard hoses. Applications include manufacturing and plant management settings.

Read More »
Dispense Valve features drip-free cutoff.

Dispense Valve features drip-free cutoff.

Pneumatically operated 752V-UHSS dispense valve has no seals or O-rings to wear out. Amount dispensed is determined by combination of fluid flow rate and valve open time. Adjustable stroke control allows flow rate to be fine tuned, while open time is regulated in increments from 0.01 to 0.001 seconds with EFD VALVEMATE(TM) controller. Applications include automated assembly machines, XYZ tables,...

Read More »
Flexible Discs grind and blend in one step.

Flexible Discs grind and blend in one step.

Cotton fiber layers in Cut-N-Finish discs are impregnated with aluminum oxide grains and then pressed and bonded together, so discs constantly reveal fresh abrasives as they work. Suitable for edge grinding, surface blending, and working fillet welds on stainless steel and aluminum, discs are available in 4 1/2 and 7 in. sizes, and in A24, A36, A54, and A80 grit sizes in both flexible and medium...

Read More »
Coolant Nozzle comes with tapped hole.

Coolant Nozzle comes with tapped hole.

Press-In ScrewBall coolant nozzle presses into reamed hole and can be easily aimed up to 35 deg either side of nozzle centerline. Its threaded hole can be fitted with extension tube to shoot farther, or it can be plugged with setscrew. Nozzle is suitable for wide variety of applications where aimable coolant stream is required.

Read More »
Flat Nozzle is available with built in flow regulation.

Flat Nozzle is available with built in flow regulation.

Stainless steel nozzle creates air stream with broad striking surface when wide objects must be dried, sorted or cleaned. It has low sound level, low air consumption, and is available with flow regulation for optimal use of compressed air. Adjusting blowing force minimizes energy consumption and noise level. Nozzle withstands high temperatures and corrosive chemical environments, and satisfies...

Read More »
Y Strainers are suitable for liquid, gas or steam service.

Y Strainers are suitable for liquid, gas or steam service.

Model 85 cast iron and bronze Y strainers handle aggressive industrial and commercial applications. Cast iron models are available in pipelines up to 10 in. in ratings from 200 to 500 psi, with threaded or flanged piping connections. Bronze strainers in pipeline sizes to 6 in., are available with threaded, flanged or solder-end connections, and are rated up to 225 psi. Strainers come with one...

Read More »
Flexible Hose Nozzle assists blowoff, cooling, and drying.

Flexible Hose Nozzle assists blowoff, cooling, and drying.

Model #1201F-12 flexible hose, small diameter, low thrust air nozzle delivers 6 oz. of thrust at distances of 12 in. using 9 SCFM of compressed air at 100 PSIG. Its compact 3/8 in. OD hose is fully flexible, but holds its position under full line pressure. Model #1201F-12 is suitable for parts feeders, vibratory bowls, packaging, and printing and finishing equipment. 1/8 in. Nozzle has NPT male...

Read More »
Precision Fabricating with Over 40 Years of Experience
Sponsored

Precision Fabricating with Over 40 Years of Experience

Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If youre looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.

Read More »

All Topics