Fluid & Gas Flow Equipment

Steel Cooler keeps lube oil cool.
Coolers

Steel Cooler keeps lube oil cool.

SX2000 is a compact, thermally efficient unit made of carbon steel with copper tubes. Several other tubing materials are available. Cast-iron bonnets, available in single, 2, and 4-pass configurations, are kept in stock, as are cores. Unit is suitable for lube oil cooling and other process-cooling applications, and is dimensionally interchangeable with similar models.

Read More »
Pump Head handles 2 channels at once.
Pumps

Pump Head handles 2 channels at once.

Masterflex Easy-Load II pump head can pump 2 channels simultaneously, eliminating need for stacking pump heads. Flow range is 0.06 to 1000 mLpm per channel depending on drive rpm and tubing selection. Each pump head accepts L/S 13, L/SC 14, L/S 16 and L/S 25 tubing sizes in any formulation. Available with cold-rolled steel or stainless steel rotors, pump head is also suitable for applications...

Read More »
Diaphragm Pump primes itself to 23 ft wc.
Pumps

Diaphragm Pump primes itself to 23 ft wc.

Air-operated Tapflo Aluminum Series double diaphragm pumps are suited for wide range of media, including paint and coatings, waste plant chemical dosing and many other pH-neutral liquid pumping applications. Pumps are available in 5 sizes covering flow capacities up to 110 gpm with infinitely variable flow control and dry run capability. Pumps handle wide range of fluid viscosities as well as...

Read More »
Vacuum Pump Inlet traps contaminants.
Traps

Vacuum Pump Inlet traps contaminants.

Posi-Trap vacuum inlet trap has self-contained filter cartridge with positive sealing gaskets on both ends to prevent blow by and protect pump from contamination and oil back-streaming. Filter cartridges are available for abrasive and corrosive applications, including stainless steel, copper gauze, molecular sieve, Sodasorb, activated charcoal, and Polyro types. Traps come in 4 and 8 in. sizes in...

Read More »
Peristaltic Pump Vs. i-FILL® Technology
Sponsored

Peristaltic Pump Vs. i-FILL® Technology

Intellitech's advanced i-FILL® pumps are used by companies working in some of the world's most demanding sectors, delivering innovative, highly accurate and repeatable results, ensuring ultimate reliability and ease of use for all of our clients.

Read More »
Pump Tubing handles pressures to 100 psi.
Tubes and Tubing

Pump Tubing handles pressures to 100 psi.

Masterflex® High-Pressure Pump Tubing is available in PharMed® and Norprene® formulations. PharMed meets FDA and USP Class VI approval criteria, and is NSF-listed. Norprene is heat-sealable, non-aging, non-oxidizing and autoclavable. Maximum temperature for both is 270°F. High-Pressure tubing is suitable for use with Masterflex L/S® High-Pressure pump system with L/S...

Read More »
Lubrication System is designed for metal stamping industry.
Air Line Lubricators

Lubrication System is designed for metal stamping industry.

Using precision spray valves and low volume low pressure (LVLP) air, MicroCoat coats stock with fine, even film of oil without dry spots or dripping. It provides constant, uniform coverage, yet allows amount of oil applied to be changed instantly if compensation for tool wear or metal pickup is required. Spray valves fit inside press between stock feed and die. Valve operation is regulated from...

Read More »
High Pressure Hoses handle up to 6,000 psi.
Hose

High Pressure Hoses handle up to 6,000 psi.

Models 792TC and 792ST spiral hoses exceed SAE 100R15 specifications, making them suitable for hydrostatic transmissions, power units, injection molding machinery, test stands, and mining equipment. Both are constructed of 6 spirals of high-tensile steel wire reinforcement, have oil-resistant high-Nitrile inner tube that is compatible with hydraulic fluid, and have abrasion-resistant covers with...

Read More »
Liquid-Tight Conduit suits continuous flexing applications.
Conduits and Ducts

Liquid-Tight Conduit suits continuous flexing applications.

Nonmetallic Type LNM-P will not wear from repeated flexing or vibration. Made of flame-retardant PVC, it resists oils, mild acids, and exposure to sunlight, and works in temperatures from -20°C to 60°C. Applications include cable carriers and industrial robots. It is available in trade sizes from 3/8 through 2 in. Conduit is CSA certified, UL listed, and meets Section 17.8 of...

Read More »
Mold Dating Insert snaps in place.
Inserts

Mold Dating Insert snaps in place.

Indexable mold dating insert allows molders to make fast changes to day, month, year or work shift without completely removing insert from mold. Date changes can be made with turn of screwdriver, while snap-in-place indexable adjustment ensures insert remains fixed in correct date position during production. Mold dating inserts are available in diameters of 6, 8, 10, 12, 16 and 20mm. Inserts are...

Read More »
Proportional Valve controls pneumatic pressure.
Valves

Proportional Valve controls pneumatic pressure.

Compact Model VP-22 provides variable pressure output in response to a 0 to 10 Vdc or 4 to 20 mA analog control signal. Integral pressure sensor provides closed-loop response. Direct plug-in pneumatic connections accept flexible tubing, eliminating need for pipe fittings. It has scalable pressure output, adjustable damping, low power consumption and LED status indication. Available in full-scale...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers