Fluid & Gas Flow Equipment

Robots

Airgas' Advanced Fabrication Technologies Group to Exhibit at FABTECH 2015

Airgas Experts to Demonstrate and Discuss New Technologies and Systems RADNOR, PA - Airgas, Inc. (NYSE: ARG), one of the nation's leading suppliers of industrial, medical, and specialty gases, as well as welding gases, consumables, and equipment, and related products, today announced that its Advanced Fabrication Technologies group will attend and exhibit at FABTECH 2015 (Booth #N18031),...

Read More »
Communication Systems

USB-C Connectors support Thunderbolt 3.

Featuring compact design that is suitable for laptops and mobile devices, Reversible USB-C Connectors can carry up to 10 Gbps of data with USB 3.1 or up to 40 Gbps with Thunderbolt 3. Devices also support DisplayPort 1.2 and can carry up to 100 WÂ- for charging full-size electronics. In addition, connectors are backwards compatible with USB 3.0 and USB 2.0.

Read More »
Connectors

Selected Thomas & Betts Blackburn® EZGround® Compression Connectors Now IEEE 837-2014 Compliant

MEMPHIS, Tenn. – Selected Figure 6 and C-tap connectors from the Blackburn® EZGround® compression connector line from Thomas Betts (TB), a member of the ABB Group, now comply with IEEE Standard 837-2014. The revised standard establishes more rigorous electromagnetic force (EMF) testing requirements for substation grounding applications. A range of EZGround Figure 6 and C-tap...

Read More »
Photovoltaic Equipment

Pullout Strength-Optimized Pipe Fitting suits solar installations.

Incorporating second set screw set at 90° in vertical barrel, Hollaender® Speed Rail® X seriesÂ- exhibits increased pullout capacity for security and durability in solar panel installations. These slip-on aluminum pipe fittings, available in fixed and adjustable tee fittings, are used with aluminum, galvanized steel, stainless steel, or black iron pipe to build...

Read More »
Peristaltic Pump Vs. i-FILL® Technology
Sponsored

Peristaltic Pump Vs. i-FILL® Technology

Intellitech's advanced i-FILL® pumps are used by companies working in some of the world's most demanding sectors, delivering innovative, highly accurate and repeatable results, ensuring ultimate reliability and ease of use for all of our clients.

Read More »
Fittings

Seginus Inc. is Pleased to Introduce the 21759-52EH Floor Panel Fitting

The 21759-52EH is eligible for installation on Various Bombardier Aircraft. This part is used in the Baggage Compartment area. Bombardier, Inc. Model Eligibility: CL-600-2B19 (Regional Jet Series 100 400) CL-600-2C10 (Regional Jet Series 700, 701 702) CL-600-2D15 (Regional Jet Series 705) CL-600-2D24 (Regional Jet Series 900) For more specific model eligibility details, please see the supplements...

Read More »
Vacuum Regulators are available in anodized aluminum.
Pressure Regulators

Vacuum Regulators are available in anodized aluminum.

Equilibar's technology for maintaining vacuum pressure despite challenging variable conditions is now available in durable and lightweight anodized aluminum. This new construction offers a lower cost option for economically minded applications needing a vacuum regulator to maintain pressure as flow rates change or vacuum supply varies. Previously, Equilibar vacuum regulators were available...

Read More »
Industrial Batch Parts Washer improves operational efficacy.
Abrasive Blast Equipment

Industrial Batch Parts Washer improves operational efficacy.

Able to heat wash water between 140 to 190°F, RW 2836 featuresÂ- 7.5 hp, reservoir-mounted, vertical, centrifugal pumps for ~65 gpm capacity at ~60 psi. Rotated by ½ hp gear motor, 28 in. dia workbasket has work clearing height of 36 in. Weight load capacity is 1,000 lb, and table is located in off center cabinet position to...

Read More »
Smart Pump Module supports chilled beam designs.
Pumps

Smart Pump Module supports chilled beam designs.

Offering proactive condensation control for active chilled beams, NEUTON™ comes complete with integrated direct digital controller, chilled and hot water connections, valves, variable-speed EC motor pumps, and smart sensors.Â- Plug-and-play module blends and re-circulates return water within its zone to convert typical 42°F and 140°F primary loop water temperatures to optimal...

Read More »
Hose

Loc-Line Modular Now at Suncoast Precision

Loc-Line Modular Hose System is now offered online at Suncoast Precision Tools. Loc-Line is the original modular hose system and is manufactured in the USA. Loc-Line is the original modular hose system and is manufactured in the USA. Loc-Line Modular Hose System is now offered online at Suncoast Precision Tools. Loc-Line is the original modular hose system and is manufactured in the USA. They...

Read More »
Turbines

Siemens Awarded Power Island Order for Natural Gas-fueled Plant in Pennsylvania, USA

• Hummel Station to power more than one million households • Seventh project in the U.S., and third project in Pennsylvania, awarded by Panda Power Funds to Siemens Â- •Siemens Financial Services to provide a $125 million equity investment  Siemens will be supplying the power island for Panda Power Funds’ 1,124 megawatt (MW) Hummel Station combined cycle power plant in...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics