Fluid & Gas Flow Equipment

Filters are suitable for working pressure to 4500 psi.
Hydraulic Filters

Filters are suitable for working pressure to 4500 psi.

PL Series Manifold Mounted Filters are available in 9 different sizes, allowing user to select most suitable model for wide range of applications. Filter elements are synthetic micro-fibre available in 4 different filtration degrees, in standard and high collapse configurations. Filter housings allow for installation of differential, visual or visual-electrical clogging indicators.

Read More »
Molded High-Flow 2-Way Valve uses no O-ring end fittings.
Valves

Molded High-Flow 2-Way Valve uses no O-ring end fittings.

Created for use in high purity/corrosive chemical applications, injection-molded Furon® In-Line-1000 Valve provides true 1 in. orifice and angled actuator that promotes maximum flow (Cv-15). It is offered in pneumatically or manually actuated versions, and has maximum operating pressure and maximum back pressure ratings of 100 psi. Fluid temperature ranges from 40°F to 212°F. 1...

Read More »
Coolant Nozzle fits machines and toolholders.
Nozzles

Coolant Nozzle fits machines and toolholders.

BlackEye has threaded hole which can be plugged with setscrew, making it suitable for toolholders with ports that occasionally need plugging. Nozzles are easy-to-aim replacement for brass balls which often move out of position while tightening lock-screw. To install, tighten lock-screw, then aim swiveling stainless steel ball with tip of Allen wrench. Rated to 150 psi, they are available in sizes...

Read More »
Coolant Nozzle is for CNC Lathes.
Nozzles

Coolant Nozzle is for CNC Lathes.

Extended ball socket on BugEye coolant nozzle provides greater aiming range than company's plain ball style nozzle, while still remaining relatively compact. Nozzles are suitable for tool positions where tool tip is difficult to reach with standard screw-lock balls. Rated to 150 psi, nozzles are available in sizes to fit almost every machine or toolholder.

Read More »
Coolant Nozzle screws on like pipe cap.
Nozzles

Coolant Nozzle screws on like pipe cap.

CapJet screws onto any NPT or BSPT pipe nipple. Rated to 150 psi, it aims easily and has wide target range. Stiffness of swiveling element ensures reliability even under severe vibration. Nozzles are suitable for high production, dedicated machine tools with rigid coolant piping. Many orifice diameters and nozzle projections are available to suit wide range of applications.

Read More »
Ball Coolant Nozzles are used for CNC lathes.
Nozzles

Ball Coolant Nozzles are used for CNC lathes.

LolliPop brass balls have integral copper tube that can be cut to any desired length and bent as required. Space efficient systems are suitable for CNC Lathes, turning centers and mill-turn machines. They are available with 3/16 in. tubing for ease of bending or 1/4 in. for maximum flow. Nozzles are rated to 500 psi and are available in sizes to fit almost every machine or toolholder.

Read More »
Coolant Nozzle System fits CNC and manual machine tools.
Nozzles

Coolant Nozzle System fits CNC and manual machine tools.

Versatile SwivelMax has large range of motion in each joint. Links swivel 72° to either side of centerline, enabling it to come full circle within 1.75 in. inscribed circle. Compact unit is suitable for tight spaces, while vibration-resistant joints provide reliability in CNC lathe turrets where inertial forces are high. Nozzles are available with variety of end nozzles and interchangeable...

Read More »
Coolant Nozzles clamp onto Bridgeport knee-mill.
Nozzles

Coolant Nozzles clamp onto Bridgeport knee-mill.

QuillJet coolant nozzle manifold clamps onto quill of Bridgeport-type knee-mills. It comes with 2 swivel nozzles with fully adjustable flow control;up to 6 nozzles can be mounted. Since nozzles move up and down with tool, constant adjustments required with other systems are eliminated, and nozzles cause little or no loss of quill travel. Nozzles are available in various sizes to fit other knee...

Read More »
Flexible Coolant System can swivel through 180°.
Nozzles

Flexible Coolant System can swivel through 180°.

AL 360 provides wide range of motion, making it suitable for machine tools where nozzle access is limited. It can change direction 180° with only 2 links. System is vibration-resistant, non-electro-conductive and available in acid-resistant material. It fits NPT and BSPT threads and is available with variety of nozzles.

Read More »
Vector® Sports Training Ball Offers Visible Point of Contact
Sponsored

Vector® Sports Training Ball Offers Visible Point of Contact

Our goal is to help every athlete derive maximum enjoyment from their sport and become a better player. We offer a line of innovative training tools that combine cutting-edge technology and out of the box thinking to deliver an unbeatable competitive advantage. The Vector® Sports Training Ball is just another example of our commitment to innovation. To learn how the Vector® is helping ballplayers everywhere, see our video.

Read More »

All Topics