Flowmeters

Flow Meters and Indicator have analog output.
Flowmeters

Flow Meters and Indicator have analog output.

Variable area DS15 devices include flow meter with measuring scales for water, nitrogen, HCl, NaOH, and special scales; flow indicator with alarm outputs, float with integrated magnet, or analog output transducer; and flow meter with integrated Hall sensor and analog output. All incorporate float which is moved along tapered tube by flowing media. Flow rates are indicated by position of float in...

Read More »
Flowmeter is used for clean and dirty fluids.
Flowmeters

Flowmeter is used for clean and dirty fluids.

COMPU-FLOW Ultrasonic Doppler Flowmeter offers flow range of 0 to 50 ft/sec with accuracy of 1% and repeatability of 0.1%. On-screen prompting and keypad entry simplify setup. There are no math or hand calculations. Flowmeter is user friendly and is suitable for dredge flows, concrete, sludges, rivers, and streams.

Read More »
Ultrasonic Flowmeter is easy to install.
Flow Sensors / Detectors

Ultrasonic Flowmeter is easy to install.

Non-invasive portable Model UF10A measures liquid flow with accuracy of 2% over flow ranges of 0.13 to 26 ft/sec. Easy to install, transducers mount directly to pipe materials such as stainless steel, cast iron, PVC, copper, and concrete with diameters of 1/2 to 4-1/2 in. Set up is simple using 15-key tactile keypad. Seven digit LCD indicates flow rate in user programmable units such as GPM, LPM,...

Read More »
Flow Meter uses Microwave Doppler technology.
Flow Sensors / Detectors

Flow Meter uses Microwave Doppler technology.

Flow Detect 1000 non-contact flow sensor provides signal indicating flow/no-flow condition of solids or powders in pipelines, air-slides, chutes, bucket elevators, transfer points and conveyor belts. Microwave Doppler technology is virtually unaffected by noise, light, pressure, heat, humidity or dust. Used for automation purposes, Flow Detect 1000 switches process equipment on or off as required.

Read More »
Flowmeters measure any liquid.
Flowmeters

Flowmeters measure any liquid.

Niagara nutating disc, positive displacement flowmeters measure virtually any liquid including viscous fluids such as asphalt, corn syrup, glue and corrosive liquids under high pressures and temperatures. Flowmeters are available in 3 to 6 in. sizes, in mechanical and magnetic types, and with registers and accessories for totalization, rate indication, transmitting and batch control. Units have...

Read More »
Turbine Meter offers low flow measurement.
Miscellaneous Meters

Turbine Meter offers low flow measurement.

C-OH45-A Low Flow Turbine Meter is based on pelton wheel-like rotor and features 316 stainless steel housing and self-lubricating ball bearings. It offers flow measurement for clean, low and moderate viscosity liquids in 12 overlapping ranges from 0.015 to 3.00 gpm, with accuracy of +/-1% (after linearization) over 10:1 flow range. Unit has max pressure rating of 1,000 psi and temperature range...

Read More »
Flow Meter handles raw sewage, irrigation, and stormwater.
Flow Sensors / Detectors

Flow Meter handles raw sewage, irrigation, and stormwater.

Area-Velocity Flow Meter (AVFM) monitors flow through open channels, partially full sewer pipes, and surcharged pipes without flume or weir. Submerged ultrasonic sensor continuously measures both Velocity and Level in channel. Fouling- and corrosion-resistant sensor is tolerant of turbulence. AVFM can be configured with submerged Velocity/Level sensor, or with submerged velocity and separate...

Read More »
Mass Flow Meter measures 13 different gases.
Flowmeters

Mass Flow Meter measures 13 different gases.

C-LA10-B Series measures differential pressure, absolute pressure, and temperature within laminar flow region to determine mass flow. Measurement range is 0.5 ccm to 1,000 lpm FS. Display shows mass flow, volumetric flow, temperature, and absolute pressure simultaneously. Pushbutton lets user select primary display and gas of interest, adjust meter response time, or tare meter to zero flow. Meter...

Read More »
Flow Meter includes HART Bus compatible electronics.
Flowmeters

Flow Meter includes HART Bus compatible electronics.

FlexMASSter(R) ST98 Flow Meter has thermal mass sensing element that provides accuracy of ±1% of reading plus ±0.5% of full scale. Element is comprised of 2 all-welded 316 stainless steel thermowells that protect RTDs. With flow range starting at 0.75 SFPS for insertion unit and 0.006 SCFM for inline unit, ST98 operates over 100:1 turndown and can read velocities to 600 SFPS. It...

Read More »
Mass Flow Meters offer integral batch control.
Miscellaneous Meters

Mass Flow Meters offer integral batch control.

FlexCOR(TM) CMF Series features ASIC design and processes multi-parameter information including mass flow, volumetric flow, density, temperature and fraction-flow. Series comes in 5 flow sizes ranging from 1/16 to 2 in. Measuring range can be as low as 0.1 lbs/min with CMF-A to over 1900 lbs/min with CMF-F. Designed with continuous, seamless tube, CMF units withstand pressure loads up to 6760...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers