Flow Controllers

Flow Controllers

Readout and Control Units suit mass flow meters/controllers.

BRIGHT Series offers local indication and operation, flow rate in actual values/percentage, fluid selection, setpoint, counter, and alarms. Modules are designed for lab-style instruments and for instruments with IP65 housing. Communication between such instruments and product is established over RS-232 digital communication port. OLED display technology offers bright and wide angle visibility....

Read More »
New Version FT4 Aeration Control Module Extends Operation to Extremely Low Flow Rates
Flow Controllers

New Version FT4 Aeration Control Module Extends Operation to Extremely Low Flow Rates

A new version of the Aeration Control Module for Freeman Technology's FT4 universal powder tester extends the operating range down to an extremely low air velocity of 0.02 mm/s. Since aeration is arguably the single most important parameter influencing the flow properties of a powder, accurate determination of its effects at all flow rates is critically important. The high degree of control at...

Read More »
Flow Controllers

Emerson Introduces New Line of Brooks® Mass Flow Meters and Controllers

The Model 4800 Series provides ultra-fast response in a compact instrument HATFIELD, PENN (January 18, 2006) Emerson Process Management has introduced the new Brooks® Model 4800 Series Mass Flow Meters and Controllers which offer a broad flow range, fast response time, compact size and many other benefits for a variety of applications. Engineered with a Micro Electro Mechanical System (MEMS)...

Read More »
Flow Controllers

Meters and Controllers provide gas flow measurement.

Brooks® Model 4800 Series Mass Flow Meters and Controllers feature Micro Electro Mechanical System sensor to deliver response to changes in gas flow rate. Allowing gas to flow directly across sensor, compact, modular instruments provide measurement and control of air, N2, O2, Ar, He, H2, CO2, CO, N2O, CH4, CH3H6, and C3H8. Model 4850 mass flow controller uses PID algorithm to optimize...

Read More »
Flow Indicators suit analog signal applications.
Flow Controllers

Flow Indicators suit analog signal applications.

Accepting all standard process signals such as 4-20 mA, 1-5 V, and 0-5 V, Series FIV flow rate/totalizer/batch controllers feature 7-segement LED display that provides 4Â-½ digits of flow rate and 6 digits of total. For applications requiring more than display of rate or total, meters can be equipped with 2 relays and 4-20 mA retransmission output. Relays can also be used for alarming based...

Read More »
Variable Speed AC Drive suits HVAC and pump applications.
Flow Controllers

Variable Speed AC Drive suits HVAC and pump applications.

Designed to reduce energy costs by adjusting motor speeds to match required flow, Telemecanique® Altivar® 61 manages and monitors all building HVAC and pump applications. It achieves under-voltage ride-thru qualified to SEMI F47 standards and eliminates need for throttling valves, dampers, or inlet guide vanes. Along with multiple I/O and communication options, drive features on-board...

Read More »
Flow Controllers

Mass Flow Controller includes zero drift detection.

Available on Model 7950S Mass Flow Controller, Zero Drift Diagnostic tool monitors flow signal during no-flow conditions. Alarms notify user when out-of-limits condition has been detected. Zero drift can be accurately detected because diagnostic has ability to monitor both positive and negative flow signals. Configuration tool application is provided that allows user to customize Zero Drift...

Read More »
Flow Controllers

Advanced Energy® to Feature Aera® Pi-980(TM) Series Pressure-Insensitive MFC for Advanced Processes at SEMICON China 2006

AE also showcasing Navigator(TM) Digital Matching Network SHANGHAI, China, March 14, 2006-Advanced Energy Industries, Inc. (Nasdaq: AEIS) today announced that it will feature its Aera® PI-980(TM) series pressure-insensitive mass flow controller (MFC) during SEMICON China 2006. The company also will showcase its Navigator(TM) Digital Matching Network and the Litmas(TM) RPS 1501 and 3001 remote...

Read More »
Air Cylinder boosts max air flow rate to 250 psi.
Flow Controllers

Air Cylinder boosts max air flow rate to 250 psi.

Designed for maximum air pressure input of 125 psi, High Flow Booster 2:1 is available in 4 in. bore size that results in maximum cylinder output pressure of 250 psi. Compact design, with body and center section made of aluminum hard coat with PTFE, suits applications with limited space. Product handles operating temperatures from 15 to 160°F and is designed for intermittent use, such as...

Read More »
Flow Controllers

Mass Flow Controllers offer optional fieldbus interface.

Combined with integrated or close-coupled control valves, IP65-rated IN-FLOW Series measures and controls gas flow within range of 0.2 mln/min to 11,000 mÂ-³n/h air-equivalent. Units are ATEX approved for use in Category 3, Zone 2 hazardous areas. Basic PC board contains all general functions including alarm, totalization, and diagnostic functions, as well as analog I/O signals and RS232...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers