Flexible Heaters

Flexible Transparent Heaters feature thin film design.
HVAC

Flexible Transparent Heaters feature thin film design.

Therma Klear Flex(TM) series heaters provide warmth needed for LCDs to operate in temperatures down to 0 to -40°C and for anti-fog, anti-icing, and de-icing of optics, sensors, and display assemblies. Products are constructed with single or multiple-layer conductive coatings with resistance from 5-200 W², which are applied to flexible optical-grade polyester. Typically 0.007 in. thick, units...

Read More »
Beaker Heaters are resistant to moisture and chemicals.
HVAC

Beaker Heaters are resistant to moisture and chemicals.

Providing uniform heat across entire surface of beaker, Silicone Rubber Heaters eliminate risk of damage due to chemical and moisture spillover. Installation and removal is facilitated by high-temperature hook-and-loop closure. Featuring standard power plug for connection to most temperature controllers, heaters are suited for variety of laboratory heating and oil bath applications.

Read More »
HVAC

Durex Industries Offers Silicone Rubber Heaters with Factory Vulcanization

Durex Industries offers silicone rubber heaters with factory vulcanization. Durex Industries already produces silicone rubber heaters for a variety of industries and applications. Silicone heaters, with a continuous operating temperature range from -60F to 428F (-51C to 220C) can be powered at voltages up to 600 volts. Using proprietary techniques, Durex Industries prepares the part for factory...

Read More »
Kapton come in densities up to 5 W/in.
HVAC

Kapton come in densities up to 5 W/in.

Available in sizes up to 12 x 26 in. and voltages up to 300 V, Kapton® Heating Elements can operate continuously from -319 to 392°F. Flexible units are produced through highly automated process that allows standard resistance densities of 100 W per in.² with nominal 0.001 in. thick Inconel®. Watt densities of 10-20 W/in.² are possible in controlled applications. Standard thickness is 0.007...

Read More »
Managing the New FGD Wastewater Regulations
Sponsored

Managing the New FGD Wastewater Regulations

EPA Steam Electric Power Generating Effluent Limitations Guidelines, or ELG’s, impact coal-fired power plant operations and their wastewater management. Specifically, the ELG’s impose limits for suspended solids, arsenic, mercury, selenium, and nitrate/nitrite for Flue Gas Desulfurization (FGD) wastewater. These regulations drive the need for technology based solutions that address and adapt to variables such as the nature of wastewater streams, types of contaminants, contaminant loading, and costs. In this guide you will learn about the best available technologies for complying with the new standards. One of the leading contenders in this process is the Fluidized Bed Reactor or FBR, which removes soluble selenium and other metals from FGD wastewater. Advantages of fluidized bed reactors include optimum microorganism efficiency, smaller overall footprint, steady-state operation, lower hydraulic residence times, system robustness, and lower costs. Download this guide for additional information on FBR technology for treating FGD wastewater, including pilot studies and tests, and polishing selenium removal options.

Read More »
HVAC

Design Kit Lets You Create Prototype Flexible Heaters

Here's an easy way to see if flexible etched thin foil heaters are right for your application. Minneapolis, Minn., October 6, 2008-Minco, a designer and manufacturer of critical components for critical applications, has a new Flexible Heaters Prototype Design Kit that lets you easily test and prototype a heater concept before starting on a journey of custom-built-to-order product. Filled with...

Read More »
HVAC

Medical Equipment Heaters have polyimide film construction.

Custom-designed to meet application and power supply needs, flexible polyimide heaters can operate in temperatures down to -319°F. Polyimide construction, resistant to radiation, solvents, and chemicals, exhibits tear resistance, dimensional stability, and minimal outgassing. Products are suited for medical device applications and clinical diagnostic instrumentation requiring low-mass heaters....

Read More »
Flexible Heaters wrap and bend while providing uniform heat.
HVAC

Flexible Heaters wrap and bend while providing uniform heat.

Sandwiched between layers of flexible insulation, etched foil or wire-wound heater elements can have uniform or profiled heat patterns. Heaters can integrate temperature sensors, flex circuits, instruments, or other electronics to provide total heating solution. End-users can choose from various standard configurations or request custom heating solution. Available types include Polyimide...

Read More »
Clear Heaters deliver heat while transmitting light.
HVAC

Clear Heaters deliver heat while transmitting light.

Featuring micro-thin, etched foil or wire-wound elements sandwiched in between optical-grade polyester sheets, Thermal-Clear(TM) Heaters provide uniform or profiled heat patterns without blocking light. Units can integrate temperature sensors, flex circuits, controllers, or other electronics to provide total heating solution. Available in sizes up to 280 x 560 mm, heaters are RoHS-compliant and...

Read More »
HVAC

Flexible Heater Kit sticks around with adhesive backing.

Able to be conformed to many flat and curved surfaces, Kapton® Heater Kits are suitable to various applications. Kits include etched foil heaters that withstand temperature extremes from -328 to 392°F and are constructed in 15 different shapes. RoHS compliant heater kit offers chemically resistant heaters of multiple resistances and wattages. Applications include automotive, aerospace,...

Read More »
HVAC

Flexible Heaters place heat precisely where it is needed.

Constructed of thin, lightweight organic polymer film, Polyimide Heaters operate in environments as low as -319°F and are suited for applications requiring low outgassing in vacuum, or resistance to radiation, fungus, and chemicals. Designed for applications requiring up to 1,100°F, Etched Foil Silicone Rubber Heaters are 0.030 in. thick and insulated with mica sheet. Hybrid flexible heaters...

Read More »

All Topics