Flaw Sensors / Detectors

Macro Modules offer wafer edge and backside inspection.
Flaw Sensors / Detectors

Macro Modules offer wafer edge and backside inspection.

Suitable for any production environment, E30(TM) and B30(TM) modules are suited for inspection and in-line monitoring of 32 nm manufacturing processes from front end of line (FEOL) through final manufacturing. Edge defects as small as 2 Â-µm on patterned, production wafers can be detected. Part of all-surface Explorer(TM) Inspection Cluster, modules can also be used with NSX(TM) Series...

Read More »
Flaw Sensors / Detectors

Fiber Optic Temperature Sensor measures up to 1,000°C.

Based on chiral grating, which is fabricated by twisting or microforming fiber, Helica(TM) Temperature Sensor is designed for applications ranging from weld monitoring and control to turbine engine service and design. Sensing element is monolithic glass fiber and features sensitivity of 0.01 nm/°C, nominal. Probe length is 300 mm standard, sensor/grating length is 15 mm, and sensor...

Read More »
Flaw Sensors / Detectors

Ultrasonic Flaw Detectors offer flexibility as needs change.

Available in 3 upgradeable models, Phasor Flaw Detectors are suited for applications ranging from corrosion monitoring to defect detection and sizing. Portable phased array Phasor XS provides highest resolution and probability of inspection, while mid-level Phasor 16/16 Weld combines phased array and conventional capability and produces full color image scans that can be stored as jpg for remote...

Read More »
Flaw Sensors / Detectors

Talisman Adds Enviroline Monitors

FT. LAUDERDALE, FLORIDA, JULY 28, 2008 Talisman Energy installed an additional 10 Enviroline Hydrogen Monitoring units this month to its network of upstream pipelines through Western Canada in a continued effort to proactively manage pipeline corrosion and integrity. The company has installed more than 25 Enviroline units since October 2007 and has been a strong proponent of the technology for...

Read More »
Flaw Sensors / Detectors

Eddy Current Flaw Detectors feature color display.

Phasec 3 is single-frequency instrument for crack and corrosion detection and conductivity and coating measurements, while Phasec 3s adds dynamic rotating inspection capability and Phasec 3d adds dual-frequency capability to 3s for inspection at 2 different depths. Devices feature Â-¼ VGA TFT display with choice of 8 color combinations to differentiate between stored and active signals....

Read More »
Flaw Sensors / Detectors

Flaw Detector incorporates EC and ECA technologies.

OmniScan® MXE flaw detector offers eddy current (EC) and eddy current array (ECA) technologies used to detect surface and slight subsurface defects in metallic structures. Included MXE v2.0 software offers interface with step-by-step Wizard Assistance Menu that accelerates calibration and setup of application parameters. Alarm features offer flexible setup conditions, and other features...

Read More »
Vision Sensor inspects for defects at any rotation of part.
Flaw Sensors / Detectors

Vision Sensor inspects for defects at any rotation of part.

Providing pass/fail output, Inspector Vision Sensor verifies completeness and quality of product regardless of angle/orientation as it comes down line. Unit features 384 x 384 resolution, IP 67 metal housing, and integrated dome light that delivers high quality images even on glossy and reflective surfaces. Applications include verifying label position, date code presence and cap inspection in...

Read More »
Flaw Sensors / Detectors

Laser Line Sensor offers profile rate of 4,000 samples/sec.

Integrating binocular vision and laser line projection, EyeCon(TM) 2000 measures wide surface area using single Gigabit Ethernet connection, and produces high-resolution image of cross section data profiles. Direct encoder input controls global synchronization better than ±1.0 Â-µs, while FireSync(TM) platform allows system integrators to upload custom bulge and dent detection...

Read More »
Flaw Sensors / Detectors

MTS Sensors Ensure Precision in Friction Stir Welding Application

R-Series with SSI provides accuracy in positioning to MTS Systems... CARY, N.C. (October 10, 2007) - MTS Systems Corp., Sensors Division is providing the R-Series SSI encoder position sensor to its parent company MTS Systems for the ISTIR Advanced Friction Stir Welding development system, the first fully instrumented friction stir welding system capable of performing load-controlled welds along...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers