Flap Discs

Flap Discs blend welds on SS railings.
Flap Discs

Flap Discs blend welds on SS railings.

Rex-Cut® FUSION(TM) Flap Discs combine premium coated abrasive layer and surface conditioning layer into one interleaf disc that can blend corner welds on SS architectural railings and grain-in the finish simultaneously. Available with coarse, medium, and very fine grits, 4Â-½ in. dia discs are designed to operate at 2,700-5,000 rpm, while 5 in. dia discs operate at 2,500-4,500 rpm....

Read More »
Flap Discs are manufactured from zirconia alumina grain.
Flap Discs

Flap Discs are manufactured from zirconia alumina grain.

With polyester/cotton backing material, XXL Z3 and compact Z3 flap discs offer edge and angled work surface solutions. Available in type 27 or 29 shapes with either 7/8- or 5/8-11 in. arbor holes, XXL Z3 line of flap discs consist of 12 discs in 4Â-½ in. dia and 40, 60, and 80 grit sizes. Featuring flaps compressed at 4° angle, compact Z3 line of flap discs include 6 discs and come in...

Read More »
Flap Discs

Miniature Flap Discs are available in 4 grit sizes.

Rex-Cut® Mini Flap Discs feature quick-change Type R fastening system for users to change between coarse, medium, fine, and very fine grit sizes of high-performance zirconium grain abrasive. Able to grind and blend in one operation, they are designed for use in right angle grinders. Discs are suited for blending and finishing SS, aluminum, and mild steel; removing machine tool marks;...

Read More »
Dual-Layer Flap Disc grinds and finishes simultaneously.
Flap Discs

Dual-Layer Flap Disc grinds and finishes simultaneously.

FUSION(TM) Flap Disc has coated abrasive layer that grinds and non-woven surface conditioning material that finishes, all in one step. Available with or without hubs, discs constantly revealing fresh abrasives as they work and are offered in coarse, medium, and very-fine grits in 4 Â-½ and 5 in. sizes. Products are suitable for use on stainless steel and aluminum, and applications include...

Read More »
Flap Discs

Flap Discs are suited for grinding contoured work pieces.

Made from premium zirconia grain and X-weight cotton backing, Z-Flex flap discs are engineered for quick grinding on contoured work pieces such as metal railings and tubes. Flexible products fracture easily in order to promote optimal cutting and lifespan. Stocked in 4Â-½ in. dia, 12 flap discs are available in 40, 60, and 80 grit sizes. They come in type 27 or type 29 shapes with either 7/8...

Read More »
Flap Discs

Aluminum Flap Discs suit high heat generating applications.

Designed for cutting soft metals such as aluminum, 36-grit flap discs contain calcium stearate coating that liquefies under heat to keep them cool and to prevent loading on soft materials. Manufactured from blue-fired aluminum oxide grain and polyester heat-treated backing, discs can also be used on brass, copper, and zinc. Products are available in 4Â-½, 5, and 7 in. dia.

Read More »
Trimmable Abrasive Flap Disc ranges from 40-120 grit.
Flap Discs

Trimmable Abrasive Flap Disc ranges from 40-120 grit.

Trimmable Cyclone(TM) features composite backing that can be trimmed up to 3/8 in. from original diameter, extending life of disc. By trimming backing material away, flap length is extended, enabling operator to access hard-to-reach areas such as right angles and irregular shapes. Non-marking backing will not damage work-piece. Made with zirconium abrasive grain, Trimmable Cyclone is available in...

Read More »
Flap Discs

Contaminant-Free Abrasive Products will not rust/corrode.

Contaminant-free products, made of white aluminum oxide/stainless steel, contain less than .01% of iron, sulfur, and chlorine. Offering includes 4-7 in. flap discs, 4Â-½-7 in. T1 and T27 thin reinforced cut-off wheels, and T27 1/8 and ¼ in. depressed center wheels. Stainless steel, 14 in. chop saw blade and 6-8 in. Premium Grain Bench Wheels are also available. Products are suited...

Read More »
Flap Discs conform to irregular surfaces.
Flap Discs

Flap Discs conform to irregular surfaces.

Big Cat(TM) abrasive flap discs have Type 27 configuration and conform to curved and irregular surfaces to help reduce gouging and undercutting. Multiple layers of coated abrasive material expose sharp, fresh grains as they wear away, maintaining cut rate and quality of finish. Discs are available in 4Â-½ and 7 in. sizes with or without 5/8-11 in. nut. Phenolic-backed discs are offered in...

Read More »
Flap Discs are made of stainless steel cloth.
Flap Discs

Flap Discs are made of stainless steel cloth.

Cyclone(TM) Stainless Steel Flap Discs are for grinding stainless steel in weld blending, deburring, deflashing, stock removal, and dressing applications. Discs are made of long-life abrasive cloth to reduce cost-per-piece. Fast-cutting cloth prevents dulling and glazing of abrasive grains and phenolic backing prevents gouging. Offered in 4 1/2 and 7 in. diameters, discs come in 60 or 80 grit.

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers