Flame Detectors

ULIS Launches Its Family Of Amorphous Silicon Infrared Detectors with the Smallest Pixel in the World
Flame Detectors

ULIS Launches Its Family Of Amorphous Silicon Infrared Detectors with the Smallest Pixel in the World

Chicago, October 19, 2006 Today, the French company ULIS (Sofradir group), which designs, develops, manufactures and sells uncooled infrared detectors, launches its range of 25-micron pixel pitch detectors: the UL 02 15 2, the UL 04 17 1, and the UL 03 19 1. ULIS is the only company to propose such a wide range of 25-micron products. The compact UL 02 15 2 can be used in thermography and...

Read More »
Programmable Detector senses invisible hydrogen flames.
Flame Detectors

Programmable Detector senses invisible hydrogen flames.

Designed for detecting water vapor at ranges to 100 ft, model 20/20SH features optical sensors and filters that offer optimal degree of spectral matching to radiant energy emitted by hydrogen fire and lowest degree of matching to non-fire stimuli. Programmable algorithms check ratio and correlation of data received by optical sensors. Applications include facilities that use hydrogen fuel cells,...

Read More »
Breakthrough Multi-Spectral Infrared (MSIR) Flame Detector with Superior False Alarm Immunity Receives FM Approval
Flame Detectors

Breakthrough Multi-Spectral Infrared (MSIR) Flame Detector with Superior False Alarm Immunity Receives FM Approval

Ideal for Oil/Gas Offshore Drilling Platforms, Pipelines, LNG & LPG Plants, Refineries, Marine Fuel Load/Unload Facilities, Chemical Plants LAKE FOREST, CA-October 11, 2006--The breakthrough Multi-Spectral Infrared (MSIR) FL4000 Flame Detector from General Monitors has been certified by Factory Mutual (FM) for application in hazardous environments. The FL4000, with its next-generation MSIR sensor...

Read More »
Flame Detectors

IR Flame Detector is immune to false alarms.

Combining optical Multi-Spectral IR (MSIR) sensor array with neural network technology (NNT) processing, FL4000 protects people, equipment, and facilities from dangerous hydrocarbon flame sources within 230 ft range. Intelligent system discriminates between actual flames and nuisance false alarm sources using 4 separate IR spectrums which sample different IR spectral areas. Flame or non-flame...

Read More »
Flame Detectors

Flame Detectors monitor for hydrocarbon-based fires.

Designed to detect UV and/or IR radiation emitted by hydrocarbon-based fires and flames, FlameGard Detectors operate as stand-alone units or can be connected to fire or security system. They are enclosed in copper-free, explosion-proof aluminum housings and can be mounted with bracket or optional swivel mount kit. In dusty environments, optional air purge kit keeps viewing glass clear. Detectors...

Read More »
Flame Detectors provide high false alarm immunity.
Flame Detectors

Flame Detectors provide high false alarm immunity.

Microcontroller-based, ATEX-approved UV/IR Model FL3110 and UV Model FL3111 include flicker-discrimination circuitry and self-checking continuous optical path monitoring to ensure fire protection. Both feature segregated wiring compartment where field terminations can be made without exposing ex-proof section to elements. Electronics are integral within stainless steel explosion-proof housing,...

Read More »
Communications Protocol offers accurate event reporting.
Flame Detectors

Communications Protocol offers accurate event reporting.

SmartScan is offered on company's IdentiFlex 600 Series fire control panels. It provides alarm verification per detector and is fully digital. Panel end-to-end response is reduced to less than 5 sec, and 198 devices per loop can be supported. Protocol enables loop distances up to 12,000 ft of twisted pair, parallel pair, THHN, and shielded wire types. One loop poll covers 10 devices.

Read More »
Flame Scanner detects presence and condition of flames.
Flame Detectors

Flame Scanner detects presence and condition of flames.

SmartScan(TM) 121 microprocessor flame scanner senses presence and condition of flames in various applications. Suited for coal, oil, gas, and non-standard fuel scanning, it features bar graph display, -40Â-º to +140ºF operating temperature, and discrimination techniques. Pilot and ignition systems, available in oil-electric, gas-electric, and direct-spark, offer capacities up to 30...

Read More »
Flame Detector monitors for hydrocarbon-based fires.
Flame Detectors

Flame Detector monitors for hydrocarbon-based fires.

FlameGard® UV/IR Flame Detector detects UV and IR radiation emitted by hydrocarbon-fueled fires and responds by activating relay, which can be part of fire alarm loop or connected to digital control system. Enclosed in heavy duty, copper-free, explosionproof aluminum housing, unit provides stand-alone operation or can be connected to standard 4-wire fire control panels. Optional Air Purge...

Read More »
Pyroelectric Detectors produce low noise.
Flame Detectors

Pyroelectric Detectors produce low noise.

Series LMM low microphonic detectors exhibit 20x reduction of detector noise output caused by mechanical vibration. High Gain pyroelectric detectors have responsivity up to 100x over standard detectors without increase in noise. Units are suited for heat and flame detection and gas analysis in applications such as medical, refinery, mining, automotive, and semiconductor instrumentation.

Read More »
3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership
Sponsored

3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership

At 3Sixty Mission Critical, we specialize in maintaining the performance and uptime of our customer's mission-critical applications. Our services are comprehensive and designed to take on the entire burden of maintenance. Our "UPS as a service" is just another example of how we develop out of the box solutions to help our customers operate more efficiently; see our video to earn more.

Read More »

All Topics