Fixed Resistors

Flat Chip Resistors suit high power applications.
Electronic Components & Devices

Flat Chip Resistors suit high power applications.

With wide terminal construction, Series WK73 features optimized thermal shock characteristics and solder joint reliability. Resistance range is 22 mW to 1 MW and TCRs are ±100, ±200, ±300, and ±800 ppm/°C. RoHS compliant units provide tolerances of ±1% and ±5% with power ratings of 1.0 and 1.5 W at 70°C. Offering current sensing, resistors are suited for automotive electronics,...

Read More »
Electronic Components & Devices

Neutral Grounding Resistors are UL and CSA certified.

Designed to meet all requirements of IEEE 32 and IEC, Neutral Grounding Resistors offer UL and CSA ratings up to 8 kV L-N. Units are available in NEMA 3R enclosure with solid steel, cross-kinked, one-piece top; top ventilating screen; and stand-off insulators. Stainless steel resistor elements come in stamped grid, edgewound, or wirewound. Optional features include powder coat finish, stainless...

Read More »

IRC'S Surface Mount Open Air Resistor Specified for Current Sensing in Automotive Applications
Electronic Components & Devices

IRC'S Surface Mount Open Air Resistor Specified for Current Sensing in Automotive Applications

MUNICH, Germany (November 14, 2006) - Providing automotive design engineers with a power current sense surface mount resistor with enhanced thermal characteristics, TT electronics IRC Wire and Film Technologies Division has developed a wider version of their open air current sense resistor with a higher power rating than conventional metal element resistive devices. Designated the OARS-XP Series,...

Read More »
Managing the New FGD Wastewater Regulations
Sponsored

Managing the New FGD Wastewater Regulations

EPA Steam Electric Power Generating Effluent Limitations Guidelines, or ELG’s, impact coal-fired power plant operations and their wastewater management. Specifically, the ELG’s impose limits for suspended solids, arsenic, mercury, selenium, and nitrate/nitrite for Flue Gas Desulfurization (FGD) wastewater. These regulations drive the need for technology based solutions that address and adapt to variables such as the nature of wastewater streams, types of contaminants, contaminant loading, and costs. In this guide you will learn about the best available technologies for complying with the new standards. One of the leading contenders in this process is the Fluidized Bed Reactor or FBR, which removes soluble selenium and other metals from FGD wastewater. Advantages of fluidized bed reactors include optimum microorganism efficiency, smaller overall footprint, steady-state operation, lower hydraulic residence times, system robustness, and lower costs. Download this guide for additional information on FBR technology for treating FGD wastewater, including pilot studies and tests, and polishing selenium removal options.

Read More »
Current Sense Resistor suits automotive applications.
Electronic Components & Devices

Current Sense Resistor suits automotive applications.

Featuring bimetallic construction with welded copper terminals, OARS-XP Series current sense surface mount resistors have wide metal alloy resistive element. Open air design allows air flow under resistive element to prevent excess heat transmission to PC board. Operating between -40 and +125°C, unit offers resistances values from 2-50 mW, tolerances of ±1% and ±5%, and inductance values of...

Read More »
Power Resistors provide optimal heat dissipation.
Electronic Components & Devices

Power Resistors provide optimal heat dissipation.

Rated up to 75 W, Series BHP75 is housed in TO-220 open-screened substrate package with insulated tapered venturi bonded to substrate for maximum heat dissipation. Resistance ranges from 1 W to 100 KW, with tolerances of ±1% and ±5%. TCRs are less than 100 ppm/°C with max DC operating voltage of 250 V. Applications include switch-mode power supply circuits, motor control and drive circuits,...

Read More »
Current Sense Resistors feature +75 ppm/
Electronic Components & Devices

Current Sense Resistors feature +75 ppm/

Rated at 2 W, surface mount SLN2 Series provides resistance range of 5-10 mW with resistance tolerance of +0.5, +1, and +5%. Measuring 0.459 x 0.276 x 0.094 in., units are manufactured with flameproof UL94V0 molded polymer case and are suitable for flow, reflow, and hand soldering. Typical applications include dc-to-dc conversion, power supplies, laptop and mobile PCs, motor controls, and...

Read More »
SMT Resistor has 1 W rating and comes in 1206 package.
Electronic Components & Devices

SMT Resistor has 1 W rating and comes in 1206 package.

Model WSLP1206 Power Metal Strip® resistor features all-welded construction with solid metal nickel-chrome or manganese-copper alloy resistive element. This 1 W current sensing resistor has 2-50 mW resistance range and offers inductance values from 0.5-5 nH. Built to conserve circuit board space, product offers frequency response to 50 MHz, thermal EMF under 3 V/°C, and performance up to 170°C.

Read More »
Chip Resistors have power ratings up to 8 W.
Electronic Components & Devices

Chip Resistors have power ratings up to 8 W.

With resistance range of 0.5-5 mohm in tolerances of ±1.0%, BCS8 Series metal element current sense chip resistors offer typ TCR of ±50 ppm/°C, with ±30 ppm/°C resistors available. They feature footprint of 6.4 x 12.8 x 2.5 mm, with temperature rating of 175°C. Surface mount devices have rating current of 90 A, max current of 126 A, and series inductance of 5 nH. Products are suitable for...

Read More »
SMT Current Sense Resistors carry ratings from 3-5 W.
Electronic Components & Devices

SMT Current Sense Resistors carry ratings from 3-5 W.

As open-air, flameproof device, OARS-XP Series has form factor that provides compliant terminations to handle TCE mismatch between device and PC board. It operates from -40 to +125°C and offers resistance values range from 2-50 mW, with tolerances down to ±1%. Surface mount current sense resistor features inductance values of less than 10 nH. Lead (Pb)-free, RoHS-compliant and zero ohm jumper...

Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Sponsored

Gorbel Introduces New Mobile Fall Protection Unit

Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.

Read More »

All Topics