Fixed Inductors

Suppression Chokes offer high inductance in compact size.
Fixed Inductors

Suppression Chokes offer high inductance in compact size.

Available in range of inductance values up to 90 mH and current up to 5 A, vertical EV Series features narrow width while horizontal EH Series features low profile. Low magnetic leakage flux allows designers to mount circuits densely. Common mode, RoHS-compliant units offer max operating voltage of 250 V, operating temperature of -13 to +212°F, and operating frequency of DC-400 Hz. Chokes...

Read More »
Fixed Inductors

Wire-Wound Chip Inductors come in EIA0806 case size.

Suited for use in signal line filter applications, LBM2016 series is comprised of 25 models with optimal thicknesses and numbers of windings for package size. Products measure 2.0 x 1.6 x 1.6 mm and feature ferrite core as well as optimized material compound ratios for outer covering. Non-polarized electrodes allow device to be mounted, right side up, regardless of orientation.

Read More »
Fixed Inductors

Chip Inductors combine low RDC and high-current operation.

Measuring 3.2 x 1.8 x 1.8 mm, LB3218 series wire-wound chip inductors combine functionality of two 3225-size low-resistance (RDC) and high-current inductors into one 3218-size device. Series, comprised of 16 part numbers rated from 0.05-6.5 ohms and 1,000-60 mA, offer inductance ratings from 1.0-330 Â-µH at operating frequencies of 796 kHz to 7.96 MHz. Non-polarized electrodes enable...

Read More »
Fixed Inductors

Chip Inductors have 0.9 mm profile.

Featuring 1A-class power rating, CKP3216 series of 1206 case size multilayer chip inductors are suited for dc-dc converter choke coil applications in portable electronic device power circuits. Series, offering current ratings from 0.7-1.1 A and 4.7-1.0 Â-µH respectively, takes advantage of internal-electrode printing process, which results in dc resistance values from 0.20-0.11 Ω....

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
Fixed Inductors

Wirewound Inductors range from .01-1,000 µH.

Offered in EIA sizes 1008, 1210, and 1812, molded chip Series NL is compatible with high-speed pick-and-place assembly equipment, and is suitable for high-temperature flow or reflow soldering processes. Miniature units feature metal tab electrodes to ensure leaching resistant terminations, and coils encapsulated in heatproof resin for resistance to shock, moisture, and vibration. Applications...

Read More »
Fixed Inductors

Chip Inductors suit high-speed signal applications.

Offered in 0402 to 1812 case sizes, Series CB Ferrite Bead Chip Inductors feature impedance from 6-2,700 Ω, currents of 50 mA to 6 A, and dc resistance of 0.02-1.2 Ω. Nickel barrier terminations provide solder heat resistance, even when using high-temperature, lead-free solder processes. Effective in applications ranging from 1 MHz to several hundred MHz, units are suited for EMI and RF...

Read More »
Fixed Inductors

Common Mode Inductors have inductance values from 0.6-45.0 mH.

RoHS compliant through-hole 7400 and 7500 Series of Common Mode Inductors measure as small as 19.0 mm wide x 21.0 mm high, allowing high-density placement in space-restrictive board designs. Features include operating temperature of -55 to +105°C, rated voltage of 250 Vac, and dielectric strength of 3,750 Vrms. DC resistance is specified from 0.025-2.68 Ω. Constructed with flame retardant...

Read More »
Thin Film RF Inductor provides tight tolerances.
Fixed Inductors

Thin Film RF Inductor provides tight tolerances.

Offered in 0402 size, surface-mount L0402 provides thin film equivalent of wire-wound inductor, with no constraint in values and inductance range of .82-6.8 nH. Land Grid Array (LGA) packaging and miniature size allow for self-alignment during reflow. Product is suited for automatic assembly in applications such as mobile communications, satellite TV receivers, GPS, vehicle location systems,...

Read More »
Chip Inductors feature EIA 0201 case size.
Fixed Inductors

Chip Inductors feature EIA 0201 case size.

Measuring 0.6 x 0.3 x 0.3 mm, multilayer Series HK is 100 nH rated, while Series HKQ, with 30% higher Q factor, includes models from 1-10 nH. All provide non-polarized electrodes that allow mounting in any orientation on circuit board. Inductors facilitate high-density PCB mounting by minimizing size of noise-suppression components in cell phone RF circuits, power amplifiers, voltage-controlled...

Read More »
Thin Film Chip Inductors cover 100-1,700 MHz frequency.
Fixed Inductors

Thin Film Chip Inductors cover 100-1,700 MHz frequency.

Providing stable inductance in communications devices, IFCB-0402 and IFCB-0603 are offered in respective 0402 and 0603 case sizes that provide Q values up to 49 at frequencies from 100-1,700 MHz. Model IFCB-0402 provides inductance values from 1.0-22 nH, while IFCB-0603 offers values from 1.0-68 nH. With lead (Pb)-free and RoHS-compliant construction, products have max temperature range of -40 to...

Read More »

All Topics