Fixed Inductors

LGA Thin Film RF Inductor comes in miniature packaging.
Fixed Inductors

LGA Thin Film RF Inductor comes in miniature packaging.

Based on thin-film multilayer technology, 0402 Land Grid Array (LGA) Inductor offers inductance range of .82-6.8 nH and allows for self-alignment during reflow. Product's miniature size and high frequency performance make it well-suited for telecommunication industry. Unit can be used in automatic assembly for applications such as mobile communications, satellite TV receivers, GPS, vehicle...

Read More »

BI Technologies' Common Mode Chokes Approved for use in Automotive Communication Applications
Fixed Inductors

BI Technologies' Common Mode Chokes Approved for use in Automotive Communication Applications

High temperature surface mount chokes improve signal integrity for CAN-BUS modes. FULLERTON, CA (March 20, 2006) - Providing automotive design engineers with a compact noise-dampening device designed to filter signals for CAN-BUS applications, TT electronics BI Technologies Magnetic Components Division recently developed a series of surface mount common mode chokes. Designated the HM67 Series,...

Read More »
Suppression Chokes offer high inductance in compact size.
Fixed Inductors

Suppression Chokes offer high inductance in compact size.

Available in range of inductance values up to 90 mH and current up to 5 A, vertical EV Series features narrow width while horizontal EH Series features low profile. Low magnetic leakage flux allows designers to mount circuits densely. Common mode, RoHS-compliant units offer max operating voltage of 250 V, operating temperature of -13 to +212°F, and operating frequency of DC-400 Hz. Chokes are...

Read More »
Fixed Inductors

Wire-Wound Chip Inductors come in EIA0806 case size.

Suited for use in signal line filter applications, LBM2016 series is comprised of 25 models with optimal thicknesses and numbers of windings for package size. Products measure 2.0 x 1.6 x 1.6 mm and feature ferrite core as well as optimized material compound ratios for outer covering. Non-polarized electrodes allow device to be mounted, right side up, regardless of orientation.

Read More »
Ten Ways to Control Aluminum Costs
Sponsored

Ten Ways to Control Aluminum Costs

All job shops want to save money, and one of the most lucrative ways to do this is by learning how to control the costs of materials such as aluminum. An analysis of your material usage as well as how much you end up scrapping can reveal a goldmine of savings. In this white paper, you will learn ten ways in which you can capitalize on these hidden reserves. From understanding scraps in a more mathematical way to accomplishing jobs with a lean manufacturing approach, this list will provide you with the necessary tools you need to assist you in your financial analysis of your shop’s material consumption. This paper also features real world case studies to illustrate how the right attitude towards material costs can affect real change in terms of money, time, and efficiency.

Read More »
Fixed Inductors

Chip Inductors combine low RDC and high-current operation.

Measuring 3.2 x 1.8 x 1.8 mm, LB3218 series wire-wound chip inductors combine functionality of two 3225-size low-resistance (RDC) and high-current inductors into one 3218-size device. Series, comprised of 16 part numbers rated from 0.05-6.5 ohms and 1,000-60 mA, offer inductance ratings from 1.0-330 µH at operating frequencies of 796 kHz to 7.96 MHz. Non-polarized electrodes enable mounting...

Read More »
Fixed Inductors

Chip Inductors have 0.9 mm profile.

Featuring 1A-class power rating, CKP3216 series of 1206 case size multilayer chip inductors are suited for dc-dc converter choke coil applications in portable electronic device power circuits. Series, offering current ratings from 0.7-1.1 A and 4.7-1.0 µH respectively, takes advantage of internal-electrode printing process, which results in dc resistance values from 0.20-0.11 Ω. Applications...

Read More »
Fixed Inductors

Wirewound Inductors range from .01-1,000

Offered in EIA sizes 1008, 1210, and 1812, molded chip Series NL is compatible with high-speed pick-and-place assembly equipment, and is suitable for high-temperature flow or reflow soldering processes. Miniature units feature metal tab electrodes to ensure leaching resistant terminations, and coils encapsulated in heatproof resin for resistance to shock, moisture, and vibration. Applications...

Read More »
Fixed Inductors

Chip Inductors suit high-speed signal applications.

Offered in 0402 to 1812 case sizes, Series CB Ferrite Bead Chip Inductors feature impedance from 6-2,700 Ω, currents of 50 mA to 6 A, and dc resistance of 0.02-1.2 Ω. Nickel barrier terminations provide solder heat resistance, even when using high-temperature, lead-free solder processes. Effective in applications ranging from 1 MHz to several hundred MHz, units are suited for EMI and RF...

Read More »
Fixed Inductors

Common Mode Inductors have inductance values from 0.6-45.0 mH.

RoHS compliant through-hole 7400 and 7500 Series of Common Mode Inductors measure as small as 19.0 mm wide x 21.0 mm high, allowing high-density placement in space-restrictive board designs. Features include operating temperature of -55 to +105°C, rated voltage of 250 Vac, and dielectric strength of 3,750 Vrms. DC resistance is specified from 0.025-2.68 Ω. Constructed with flame retardant...

Read More »
Thin Film RF Inductor provides tight tolerances.
Fixed Inductors

Thin Film RF Inductor provides tight tolerances.

Offered in 0402 size, surface-mount L0402 provides thin film equivalent of wire-wound inductor, with no constraint in values and inductance range of .82-6.8 nH. Land Grid Array (LGA) packaging and miniature size allow for self-alignment during reflow. Product is suited for automatic assembly in applications such as mobile communications, satellite TV receivers, GPS, vehicle location systems,...

Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Sponsored

Gorbel Introduces New Mobile Fall Protection Unit

Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.

Read More »

All Topics