Fixed Capacitors

Polymer Electrolytic Capacitors range from 2.5-50 Vdc.
Electronic Components & Devices

Polymer Electrolytic Capacitors range from 2.5-50 Vdc.

Available in options up to 50 V for 12 V and 24 V power rails, T591 Series consists of solid electrolytic capacitors with conductive polymer cathode capable of delivering very low ESR and optimized capacitance retention at high frequencies. Automotive-grade devices provide reliability when tested to 500 hr in 85°C with 85% RH. With capacitance up to 330 µF and operation up to 125°C,...

Read More »
Wet Electrolytic Tantalum Capacitors operate up to 200
Electronic Components & Devices

Wet Electrolytic Tantalum Capacitors operate up to 200

Hermetically sealed in welded tantalum can and header assembly, TWA-Y Series is capable of up to 2,000 hours of operation with applicable derating. High capacitance cathode system enables high CV performance in standard DSCC case sizes spanning T1-T4. Manufactured in accordance with CECC 30 202-01 (EN 130202), series offers capacitance values from 150–1,000 µF with ±10% or ±20% capacitance...

Read More »
Electrical Equipment & Systems

Engine Start Module targets industrial diesel equipment.

Suitable for cranes, backhoes, bulldozers, and off-road trucks, ultracapacitor-based 24 V Engine Start Module takes over engine cranking and starting function by remaining fully charged, even if battery voltage drops significantly. ULTRA 31/900/24V and ULTRA 31/1100/24V are available for starting diesel engines up to 12.5 L and 15.0 L, respectively. Performing normally over broad temperature...

Read More »
Snap-In Power Aluminum Capacitors come in cases down to 20 x 25mm.
Electronic Components & Devices

Snap-In Power Aluminum Capacitors come in cases down to 20 x 25mm.

Supplied in cylindrical aluminum case with pressure relief valve, insulated with blue PET sleeve, miniaturized 256 PMG-SI series offer capacitance from 820–47,000 µF, operating range of -40 to +105°C, and useful life of 2,000 hr at +105°C. There are 17 case sizes ranging from 20 x 25 mm to 35 x 45 mm, voltages vary from 16–100 V, and ripple current is rated to 4.85 A. These polarized...

Read More »
Whitepaper: 7 Trends for IoT in Hospitality
Sponsored

Whitepaper: 7 Trends for IoT in Hospitality

The Internet of Things is rapidly becoming a defining characteristic in the daily landscape of human experience. Billions of smart devices are already connected to this vast system through smart homes, medical devices, and much more; the trend is predicted to continue its exponential growth into the hundred billions within the next few years. This white paper illuminates how the future of IoT will completely revolutionize the way the hospitality industry in particular will function with this new technology. Due to the ability to reduce energy costs, reduce staff labor, and create completely individualized and engaging guest experiences, the hospitality industry is in a unique position to capitalize on IoT. Using real life case studies, the report outlines seven ideas for how the IoT can be used to reduce energy consumption, increase guest satisfaction, improve maintenance, and more.

Read More »
Electrical Equipment & Systems

Maxwell and Kenworth Offer Ultracapacitor-Based Engine Starting Module in New Trucks

Maxwell's Engine Start Module will be available on Kenworth's T680 and T880 SAN DIEGO – Maxwell Technologies, Inc. (Nasdaq: MXWL), a leading developer and manufacturer of ultracapacitor-based energy storage products, today announced that its ultracapacitor-based Engine Start Module (ESM) will be offered as a factory-installed option on new Kenworth T680 and T880 trucks. Kenworth...

Read More »
Snap-In Aluminum Electrolytic Capacitors are rated to 550 Vdc.
Electronic Components & Devices

Snap-In Aluminum Electrolytic Capacitors are rated to 550 Vdc.

Designed for high ripple current applications, ALC10 Series feature surge voltage capability and extended life performance. Electrolyte allows voltage capabilities up to 550 Vdc in board-mountable form factor. With operational life up to 18,000 hr accommodating reliability-focused industrial and commercial applications, these snap-in aluminum electrolytic capacitors can be used in frequency...

Read More »
Electronic Components & Devices

Wet Tantalum Capacitor is approved to DLA 15005.

Featuring glass-to-tantalum hermetic seal, Model DLA 15005 is approved to Defense Logistics Agency drawing 15005. Electrolytic capacitor combines reverse voltage of 1.5 V at +85°C with optimized vibration capability and thermal shock of 300 cycles. Device operates from -55 to +85°C with current voltage of 75 V and capacitance of 1,000 µF. Offered in axial T4 case size, capacitor is optimized...

Read More »
Electronic Components & Devices

AC Motor Run Capacitors accelerate install with locking terminals.

Supplied in rugged, flame-retardant case, QPC Series operates from -25 to +85°C and offers locking push-wire contacts that accelerate installation and eliminate soldering. Users push and lock wire in place, and removal is accomplished by sliding probe tip into release port. Removable slide-lock metal mounting bracket, which can be mounted first, also accelerates assembly. Multiple contacts...

Read More »
Electronic Components & Devices

Lithium Ion Capacitor Cells save space in energy systems.

Available in laminate and prismatic individual cells as well as multi-cell modules, ULTIMO Lithium Ion Capacitors have unique, flat design that allows for compact stacking when used in series, making efficient use of space. Complimenting ULTIMO product line, Energy ActionSystem Lithium Ion Capacitor Development Shelf, Model 3312, works with several LiC modules in series to provide connection of...

Read More »
Polymer-Aluminum Electrolytic Capacitors carry 125
Electronic Components & Devices

Polymer-Aluminum Electrolytic Capacitors carry 125

Supplied in V-chip, SMT case, type HZC Hybrid Polymer-Aluminum electrolytic capacitors utilize liquid electrolyte and solid polymer. Capacitance ranges from 10–330 µF at voltage ratings from 25–63 Vdc, and ripple current values exceed 2,000 mA for larger chip sizes. When operated at rated temperature of 125°C and rated voltage at full ripple current rating, load life exceeds 4,000 hr. Areas...

Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Sponsored

Gorbel Introduces New Mobile Fall Protection Unit

Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.

Read More »

All Topics