Fixed Capacitors

Snap-in Aluminum Power Capacitors are rated up to 450 V.
Fixed Capacitors

Snap-in Aluminum Power Capacitors are rated up to 450 V.

Available in 17 case sizes from 35 x 50 mm to 45 x 100 mm, Series 095 PLL-4TSI 4-terminal capacitors feature cylindrical aluminum case insulated with blue sleeve and pressure relief. Polarized aluminum electrolytic capacitors, with non-solid electrolyte, include voltage ratings from 350-450 V and capacitance/voltage combinations from 390 Â-µF at 450 V to 2,200 µF at 350 V. Units also...

Read More »
Custom Ultracapacitor Modules target military applications.
Fixed Capacitors

Custom Ultracapacitor Modules target military applications.

Custom ultracapacitor modules employ either proprietary PowerBurst® or Maxwell Technologies' BoostCap® ultracapacitor cells, both of which are 2.7 V, UL 810A Recognized, and RoHS-compliant and feature capacitance values from 0.5-3,000 F. Passive or active cell balancing topology promotes efficient balancing between cells while minimizing additional current leakage. Offered in aluminum...

Read More »
Fixed Capacitors

Motor Capacitors at Global Industrial

Global Industrial's website, GlobalIndustrial.com, continues to improve their Motors department. The recent addition of Packard brand Capacitors has helped Global increase their product offering. With Packard capacitors, Global is now providing customers with even more replacement parts for HVAC products including air conditions, heaters and more. Packard, a distributor and manufacturer of the...

Read More »
Aluminum Electrolytic Capacitors are offered in ranges from 1.7-1,000 µF.
Fixed Capacitors

Aluminum Electrolytic Capacitors are offered in ranges from 1.7-1,000 µF.

Replacing liquid electrolyte with solid polymer material, MXCP Series offers stable operation when exposed to temperature fluctuations. Units are rated for 6.3-100 Vdc and are available in temperature ranges from -55 to +105°C and -55 to +125°C. Offered in 5 case sizes from 6.3 x 6.0 to 10 x 12.5 mm, conductive SMD capacitors are coated with epoxy resin for resistance to heat,...

Read More »
PCB Fabrication Notes Guide
Sponsored

PCB Fabrication Notes Guide

The overall purpose of your fabrication notes is to enhance Design for Manufacturability for optimal PCB fabrication and assembly while maintaining applicable industry standards and regulations.

Read More »
Ultracapacitors aid energy storage and power delivery.
Fixed Capacitors

Ultracapacitors aid energy storage and power delivery.

With each cell operating at 2.7 V, K2 Series BOOSTCAP® ultracapacitors are intended for applications that require burst power and heavy cycling which cannot be efficiently provided by battery or power supply alone. Cells range from 650-3,000 F and provide source of back-up and pulse power, ensuring critical system functions remain available during dips, sags, and outages. Individual and...

Read More »
Fixed Capacitors

Supercapacitors feature low ESR ratings.

Designed to handle 5 A max, 5F SuperXcaps(TM) feature ESR rating of 70 mW and are contained in flexible ultra-thin pouch for use in cell phones, battery operated power tools, and wireless energy harvesting devices for capture of motion, light, and strain measurement. Once battery runs down to point where it can no longer generate sufficient voltage for start up, SuperXcap can be called upon to...

Read More »
Fixed Capacitors

Aluminum Electrolytic Capacitors use polymer cathode technology.

Aluminum electrolytic capacitors in ECAS series have resin-molded case that utilizes multilayer aluminum foil for anode and solid conductive polymer for negative cathode. Offered in capacitance range from 6.8-470 Â-µF, SMT units also have rated voltages from 2-16 Vdc. High capacitance value and low ESR lead to low impedance at frequencies up to 500 kHz, providing noise suppression, ripple...

Read More »
Fixed Capacitors

Ultracapacitors are optimized for high-volume manufacturing.

Operating at 2.7 V, K2 Series large cell BOOSTCAP® ultracapacitors range from 650-3,000 farads and include multicell modules from 16-125 V. High-performance products feature rugged welded electrical pathway and operate in extreme temperatures. They also feature ultra-low internal resistance and low resistor-capacitor time constant. Units offer over 1 million charge/discharge cycle lifetime...

Read More »
Fixed Capacitors

Detonator and Pulse Energy Capacitors operate to 200°C.

R2D high-temperature detonator and pulse energy capacitors use dielectric formulation designed for reliable operation under single or multiple pulse firing applications. Energy density exceeds conventional Class 1 materials and offers optimized short duration pulse delivery. Discharge pulse width is less than 100 nsec typ and will vary with load conditions. Other sizes, voltages, and capacitance...

Read More »
Aluminum Solid Capacitors offer voltage ratings to 35 V.
Fixed Capacitors

Aluminum Solid Capacitors offer voltage ratings to 35 V.

Featuring conductive polymer technology, RoHS-compliant 94SVPD Series offers max temperature rating of +125°C, ripple current to 3.8 A at 100 kHz and +105°C, and low ESR down to 28 mW at 100 kHz. As solid-electrolyte devices, capacitors' specifications make them suited for smoothing, filtering, buffering, and voltage decoupling applications.

Read More »
Solder Redefined
Sponsored

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers