Ultracapacitor Product Platform Expanded to 3.0 Volt
The Ultracapacitor Cells from Maxwell Technologies, Inc. has been expanded to 3.0 volts within its product platform. The upgrade extends the expected lifespan of their products and is designed for both single-cell applications and multi-cell complex module systems. The 3.0V XP Small Cell Ultracapacitors is an expansion of the company’s XP brand of products and is used for actuators, emergency...
Read More »
New Grid Energy Storage Subsystem from Maxwell Delivers Long Life Grid Voltage and Frequency Support Solutions
The Maxwell’s Grid Energy Storage Subsystem is used with SVC PLUS FS that offers inertia in the form of fast, active power injection. The SVC PLUS FS stabilizer feeds required reactive power for stable grid operation in less than 50 ms. The ultracapacitors can store up to 200 MW of electric power and transferred to the grid. The ultracapacitors from Maxwell provides support for grid voltage and...
Read More »
New T599 KO-CAP Capacitors are Designed for High Humidity/Temperature Applications
Kemet’s T599 KO-CAP Polymer Electrolytic Capacitors meet the 1000 hrs of humidity bias testing under 85°C with 85% relative humidity at rated voltage. Units deliver stability and endurance in harsh humidity and temperature conditions. These capacitors are endurance tested at 150°C for up to 1,000 hrs and are compliant to AEC-Q200 standards.
Read More »
New TPLH Series Ultracapacitors are Designed for High-Power Applications
Tecate’s 3V TPLH Series Ultracapacitors are now available in snap-in connector style with cell values ranging from 100F to 450F. Units are suitable for application such as robotics, material handling, military, wind-power pitch control and medical devices. The capacitors can be operated in -40°C to +65°C temperature range and offers a projected life cycle of 500,000. Units are compliant to...
Read More »
Speciality Heat Exchangers 101: Considerations for Choosing the Right One for Your Application
Specialty heat exchangers play an important role in a wide variety of industrial applications, and it's crucial to select the correct device for your application. Check out this guide and learn how to choose the right heat exchanger.
Read More »
CAP-XX's New 3V Thin Prismatic Supercapacitors Eliminate the Need of LDO Voltage Regulator
CAP-XX’s 3V Thin Prismatic Supercapacitors are offered in versions ranging from 0.9mm to 1.9mm thick. Capacitors come in Z, 20mm x 15mm; A, 20mm x 18mm; W, 17.5mm x 28.5mm; S, 17.5mm x 39.5mm footprints. Units are suitable for FOBs and IoT devices in high-energy, high-power applications and provide a low leakage current of 1.5µA for a 500mF cell at 3V. Units meet IEC 62391 endurance standards...
Read More »
BMI AC Motor Run Capacitors are compliant to UL and RoHS standards.
Barker Microfarads 800P and 810P AC Motor Run Capacitors are available in round and oval sizes and are used for split phase motor, compressor, filter and other AC applications. Units have the ability to clear fault area during momentary short occurrence and come in moisture and oil-resistant aluminum casing with steel covers. Capacitors are operated on 110 VAC - 330 VAC voltages and are suitable...
Read More »
Electrolytic Capacitors offer life of 3000 hours.
Electrolytic Capacitors are available in 85°C THA which is 8.2 mm thick and 105°C THAS variant which comes in 9 mm thickness. Units are suitable for tablets, laptops, LED driver modules, power supplies, drones, rpvs and set-top box applications. Products are REACH and RoHS compliant and come with laser welded aluminum case. Capacitors feature valve which discharges hydrogen gas and offer 140µF...
Read More »
Aluminum Electrolytic Capacitors are rated to 3000 hrs life.
Aluminum Electrolytic Capacitors are offered in THA and THAS Series models with 8.2mm and 9mm thickness respectively. Featuring sealed, laser welded aluminum case, the capacitors offer a capacitance values from 140 µF at 450 Vdc to 18,000 µF at 10 Vdc. Suitable for applications tablets, laptops, drones and LED driver modules,
Read More »
ATB Series Aluminum Electrolytic Capacitors are ROHS compliant.
ATB Series Surface-Mount Aluminum Electrolytic Capacitors feature capacitance values in a range of 1uF and 1000uF. Units are suitable for filtering, bypass/coupling and de-coupling applications and offer life of 5,000 hours at 105°C. Products provide shelf life of 1000 hours, low impedance and ESR and are lead free.
Read More »
DGH Series Super Capacitors deliver life of 500,000 cycles.
Available in 21 different value/voltage combinations in the range from 0.5 F to 350 F capacitances with voltage ratings from 2.7 to 5.5 W VDC, DGH Series Super Capacitors are suitable for energy harvesting, transportation power, UPS systems, LED power and solar lighting applications. Offered with radial wire leads or snap mounts, supercaps are RoHS compliant. Operated in -40 to +65°C temperature...
Read More »
Do You Have Unique Lifting Needs?
EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.
Read More »
