Fittings

Pipe Fittings extend structures without dismantling.
Fittings

Pipe Fittings extend structures without dismantling.

Hinge and Pin slip-on pipe fittings close around Size 8 pipe and are secured in place with locking pin and case hardened set screws. Model A12 Split 45° Single Socket Tee connects 2 sections of pipe at 45° angle. Model A35 Split Three Socket Cross ties upright with horizontal pipes in 3 directions, all at 90° to upright. Model A40 Split Four Socket Cross ties center upright with...

Read More »
Conduit Fittings provide environmental protection.
Fittings

Conduit Fittings provide environmental protection.

Metallic Liquidtight Conduit Fittings, offered in Â-½ and ¾ in. straight body design, feature UL Type 3R, 12, 13, and 4 environmental enclosure ratings. They are 3rd party certified to provide protection from windblown dust and rain, splashing water, hose-directed water, and damage from external ice formation.

Read More »
Vacuum Suction Cup Fittings provide tight seals.
Toroidal Sealing Rings (O-Rings)

Vacuum Suction Cup Fittings provide tight seals.

Captured O-Ring Barbed Fittings combine mechanical fit of metal-to-metal connections with static sealing qualities of O-rings, creating leak-proof seals. Designed to screw into suspensions and retain their position, even under constant vibration, units have machined grooves for O-ring that will not break and flare out when tightened. Units are available in 10-32 UNF through 1/8 in. thread sizes...

Read More »
Push-In Fittings suit compressed air and vacuum applications.
Fittings

Push-In Fittings suit compressed air and vacuum applications.

BasicLine Fittings consist of Type QB inch and Type QS-H metric hybrid versions. Available in straight, elbow, and tee configurations, each fitting includes stainless steel retaining ring, which holds tubing securely without damaging surface. Vibration and pressure surges are safely absorbed and tubing can easily be detached by pressing down release ring. NBR rubber-sealing ring guarantees tight...

Read More »
Fittings facilitate sealing and draining vertical conduit.
Fittings

Fittings facilitate sealing and draining vertical conduit.

Suited for hazardous locations, Type EYD Vertical Drain/Seal Fittings are threaded for rigid conduit or IMC. Available in sizes from ½-4 in., fittings are precision cast in malleable iron and eliminate need for rubber hose to create drain path through sealing compound. Fittings minimize passage of vapors and gases and prevent passage of flames from one portion of conduit system to another,...

Read More »
Couplings provide up to 8 in. of movement in conduit runs.
Fittings

Couplings provide up to 8 in. of movement in conduit runs.

Series XJ Expansion Couplings have weather-tight joints as well as metallic packing ring to assure metal-to-metal continuity. They are UL listed for indoor applications without bonding jumpers, and for outdoor use with bonding jumpers. Units feature malleable iron end-fittings and hardened steel body. Four inch movement couplings are offered in Â-½ to 5 in. trade sizes, while 8 in. movement...

Read More »
Aluminum Fittings fit railings and pipe structures.
Fittings

Aluminum Fittings fit railings and pipe structures.

Kee Lite® fittings are constructed of high-grade aluminum silicon magnesium, making them strong, lightweight, and corrosion-resistant. Fittings have contoured design, hidden set screws, and bright finish suitable for railings, lighting grids, display fixtures, playground equipment, racks and shelving, guard rails, and other tubular pipe structures. For use with 1Â-¼ and 1½ in....

Read More »
Threaded Polypropylene Fittings are heavy-duty rated.
Fittings

Threaded Polypropylene Fittings are heavy-duty rated.

Schedule 80 threaded fittings, manufactured from glass-reinforced polypropylene, are chemical resistant to most acids. With operating temperature range of 10°F to 180°F, they carry recommended operating pressure of 150 psi max @ 70°F. Schedule 80 fittings include tees, elbows, crosses, pipe nipples, reducer nipples, reducer bushings, pipe caps, pipe couplings, and pipe plugs.

Read More »
Base Fittings require no welding, threading, or drilling.
Fittings

Base Fittings require no welding, threading, or drilling.

Designed for use with 1Â-¼ in. and 1½ in. standard pipe, Kee Lite® base fittings are constructed of high-grade Aluminum Silicon Magnesium. Model L150 provides heavy-duty, 4-point fixing base flange for use when structural fitting is required. Model L152 provides either 4-point fixing base or wall flange. Fittings are corrosion-resistant and intended for indoor or outdoor use....

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers