Fittings

Pneumatic Fittings are offered in food grade versions.
Fittings

Pneumatic Fittings are offered in food grade versions.

Offered in over 45 different shapes, Pneufit D series push-in fittings are suitable for compressed air applications and approved by FDA, WRAS, SK Zert, and NSF-51 for use in food processing. Parts incorporate integral stainless steel grab rings, which offer secure assembly for Nylon PU and PE tubing. Tube sizes are available from 4-12 mm and 5/32-Â-½ in. Pneufit D can also be specified with...

Read More »
Base Mount Structural Pipe Fittings accommodate toe boards.
Fittings

Base Mount Structural Pipe Fittings accommodate toe boards.

Suited for indoor or outdoor use, corrosion-resistant Kee Klamp® 69-8 malleable cast iron and Kee Lite® L69-8 aluminum slip-on fittings fit 1Â-½ in. dia pipe. They can be used to construct industrial, commercial, and residential guard railing, as well as other pipe-fitted structures. Kee Klamp fittings are galvanized to ISO 1461 ISO 9001:2000 manufacturing quality standard, while...

Read More »
Quick Disconnect Fitting simplifies tubing connections.
Fittings

Quick Disconnect Fitting simplifies tubing connections.

Series F-4150, 10-32 UNF male-threaded Quick Disconnect is available in 3 barb configurations: straight, elbow, and tee. Depressing latching pushbutton enables removal of barb, and re-insertion of barb locks it into position. Barbs can be provided for 1/16 in., 1/8 in., or .170 ID tubing. Design allows fitting to swivel 360Â-º.

Read More »
Fittings offer single-barb design.
Fittings

Fittings offer single-barb design.

Pneu-Edge(TM) fittings feature sharp, single-barb design that provides tight grip and seal. Precision machined barbs ensure permanent tubing installation without need for clamps. Straight connectors, tees, elbows, crosses, and couplings are available to accommodate various fluid handling circuits.

Read More »
Fittings

M3 Threaded Compression Fittings have compact design.

Ultra-miniature M3CB-1016-303 and M3CB-1018-2-303, available for 1/16 and 1/8 in. OD tube sizes respectively, are constructed of 303 and 316 stainless steel and employ Buna-N, fluorocarbon, EPDM, and silicone seals. Model M3CB-1016-303 has 8.4 m installed height and 5 mm hex size, while M3CB-1018-2-303 features 11.9 mm height and 6 mm hex size. Both fittings feature 0-3,000 psig inlet pressure...

Read More »
Heat Trap Fittings provide quiet operation.
Fittings

Heat Trap Fittings provide quiet operation.

Hush(TM) products feature thermoplastic ball with elongated tail designed to reduce rattle in water heaters. During flow of water, tail is forced to interior surface of fitting, reducing possibility of noise. In tests, decibel rating of ~55 dB remains unchanged with water flow rates from 1-9 gpm. Featuring steel-to-plastic construction that creates non-corrosive waterway lining, self-cleaning...

Read More »
Conduit Fittings suit demanding electrical applications.
Fittings

Conduit Fittings suit demanding electrical applications.

Flexicon FPA Nylon Conduit Fittings provide liquid-tight, secure connection to flexible, corrugated nylon conduit or tubing. Available in straight, 45°, and 90° sweep styles, products are offered in metric, PC, and NPT thread patterns. Tamper- and vibration-resistant, one-piece design is constructed from corrosion-resistant polyamide 6/6 nylon. Body and sealing nut install onto fine...

Read More »
Pneumatic Function Fittings enable rapid assembly.
Fittings

Pneumatic Function Fittings enable rapid assembly.

Designed for assembly of pneumatic circuits, fittings facilitate tube insertion and provide positive tube anchorage. They are suited for use with tubing types from Nylon 11/12 and polyurethane to other plasticized or unplasticized tubing. Suitable for pressures to 145 psi, products have operating temperature range of -68 to +176°F and can be deployed in industry sectors that utilize...

Read More »
Push-to-Connect System is suited for robotic welders.
Tubes and Tubing

Push-to-Connect System is suited for robotic welders.

Push-to-connect system consists of MicroWeld(TM) fittings and Parflex Microweld tubing designed for air and water supply lines on robotic welding equipment. Silicon-free components have UL94 V-O rating for flame resistance and prevent spatter build-up. No-skive tubing reduces assembly time, while push-to-connect technology facilitates assembly, disassembly, and re-assembly. Fittings are available...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers