Fittings

Heavy-Duty Fittings are made from reinforced nylon.
Fittings

Heavy-Duty Fittings are made from reinforced nylon.

Offered in straight, tee, and elbow styles in various sizes from 1/8 through Â-¾ tapered NPT, fittings exhibit resistance to chemicals, handle pressures up to 200 psi, and withstand temperatures to 140°F. Suitable for air, vacuum, and liquid systems, series can be used in compressed air, plumbing, and oil feed applications as well as paint, sprinkler, cooling, dispensing, acetic,...

Read More »
Screen Fittings offer in-line or in-port protection.
Fittings

Screen Fittings offer in-line or in-port protection.

Offering nominal ratings from 65-480 microns, Protective Screen Fittings are available in sizes -4 through -12 for use with Triple-Lok® 37° flare and Seal-Lok(TM) O-ring face seal fittings. Constructed with stainless steel screen elements, -4 size features basket-style screen, while remaining sizes are dome style. Screen fittings are suited for gauge and instrumentation protection, as...

Read More »
Fittings

Sanitary Fittings meet 3-A and ASME-BPE standards.

Constructed of 316L stainless steel, sanitary fittings are offered in male and female I-line and bevel seat; Tri-Clamp®, mini Tri-Clamp, and Tri-Clamp elbow; male and female cam and groove; tube weld adapter; and pipe weld adapter styles. Each features smooth, radiused edges and are crimp applied using mating hose collars. With wetted surface finish of 15 Ra or better, fittings come in...

Read More »
Electrical Connectors

Fittings feature snap-in design.

Made of die-cast zinc, WHIPPER-SNAP(TM) Connectors feature hardened spring steel locking ring that eliminates need for locknut and installs in seconds. Double locking tabs hold connector tight in box, while additional tension tabs provide continuity and clear wire path. Push-through design eliminates snags and wire damage. WHIPPER-SNAP(TM) connectors are UL listed for grounding when installed in...

Read More »
Pipe Fitting serves as socket tee and crossover.
Fittings

Pipe Fitting serves as socket tee and crossover.

Constructed of malleable iron and treated for corrosion resistance, slip-on EF43G is used to build racks and other tubular pipe structures. It joins horizontal rails to upright, leaving protruded socket to take horizontal tie, perpendicular to other rails, across section. Product, suited for building shelved racks or pallet racks, is available to fit following pipe sizes: Easyfit Size 25 (1 in.),...

Read More »
Tube Fittings provide leak-proof and torque-free seals.
Fittings

Tube Fittings provide leak-proof and torque-free seals.

Instrumentation-grade Compression Tube Fittings consist of nut, back ferrule, front ferrule, and body that when installed become 5-piece connection providing solid, leak-free joint. Two ferrules are tightly swaged around tube and lack of initial strain on tubing ensures no tubing wall damage. Leaks are prevented because there is axial movement along tube instead of rotary motion creating joint....

Read More »
Threaded Compression Fittings fit ¼ in. OD tubing.
Fittings

Threaded Compression Fittings fit ¼ in. OD tubing.

Offered in straight and elbow configurations, 10-32 threaded compression fittings incorporate O-ring seals in variety of elastomers to provide leak-free installation. Designed with Â-½ in. hexagonal body, straight compression fittings MCB-14 (brass) and MCB-14-303 (303 SS) are 53/64 in. long. Elbow compression fittings MCBL-14 (brass) and MCBL-14-303 (303 SS) are 59/64 in. long and have...

Read More »
Pneumatic Fittings are offered in food grade versions.
Fittings

Pneumatic Fittings are offered in food grade versions.

Offered in over 45 different shapes, Pneufit D series push-in fittings are suitable for compressed air applications and approved by FDA, WRAS, SK Zert, and NSF-51 for use in food processing. Parts incorporate integral stainless steel grab rings, which offer secure assembly for Nylon PU and PE tubing. Tube sizes are available from 4-12 mm and 5/32-Â-½ in. Pneufit D can also be specified with...

Read More »
Base Mount Structural Pipe Fittings accommodate toe boards.
Fittings

Base Mount Structural Pipe Fittings accommodate toe boards.

Suited for indoor or outdoor use, corrosion-resistant Kee Klamp® 69-8 malleable cast iron and Kee Lite® L69-8 aluminum slip-on fittings fit 1Â-½ in. dia pipe. They can be used to construct industrial, commercial, and residential guard railing, as well as other pipe-fitted structures. Kee Klamp fittings are galvanized to ISO 1461 ISO 9001:2000 manufacturing quality standard, while...

Read More »
Quick Disconnect Fitting simplifies tubing connections.
Fittings

Quick Disconnect Fitting simplifies tubing connections.

Series F-4150, 10-32 UNF male-threaded Quick Disconnect is available in 3 barb configurations: straight, elbow, and tee. Depressing latching pushbutton enables removal of barb, and re-insertion of barb locks it into position. Barbs can be provided for 1/16 in., 1/8 in., or .170 ID tubing. Design allows fitting to swivel 360Â-º.

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics