Fittings

Machined Shaft Components have zero defects.
CNC Machining

Machined Shaft Components have zero defects.

Precision machined and ground in any shape to any length, Complex Machined Shaft Components include threaded, bored, spindled, tapered, and eccentric shafts. Capabilities are: CNC turning machines up to 2Â-½ in. bar diameter, Swiss and CNC Swiss automatics to 1¼ in. bar diameter, single spindle automatics to 2 3/8 in. bar diameter, and multi-spindle automatics to 3¼ in. bar...

Read More »
Hollaender® Installs New "Speed-Rail® over Broadway"
Guardrails and Railings

Hollaender® Installs New "Speed-Rail® over Broadway"

CINCINNATI, OH (May 05, 2008) - Hollaender® Manufacturing was recently chosen by Douglas Lister Architects to supply the Astor Court Apartments, located at 89th Street and Broadway in New York City, with approximately 1,000 linear feet of aluminum railing with infill panels for the roof of this historic Manhattan apartment building. Prior to the installation, Astor Court, built in 1916, still...

Read More »
Cr6 Free Plating
Fittings

Cr6 Free Plating

To conform to new European Standards PIRTEK USA has changed the plating on its hydraulic fitting lines. The European automotive industry is leading these changes this with an "The End of Life Vehicle Directive" which came into effect in July 2007. With these new regulations any company who wishes to export to an E.U. member state, will have to abide by these new Cr6 regulations. To clearly...

Read More »
Flexible Conduit Fittings eliminate need for bending machines.
Fittings

Flexible Conduit Fittings eliminate need for bending machines.

Flexel(TM) EMT Flexible Fittings come in 1Â-¼ to 4 in. sizes with stub fittings on both ends to allow for use with set-screw and compression fittings. They bend to one or more angles with just elbow grease, knee, or hammer, to full 90° bend or any position in between, and they can also be re-bent. Internal diameter is maintained per NEC specification, and fittings are suitable for...

Read More »
Custom Fittings suit aerospace and other applications.
Contract Manufacturing Services

Custom Fittings suit aerospace and other applications.

Fittings and connectors, including Dynatube, Parker, and Statoflex Tube Fittings, are used in aerospace and aircraft applications. They can be made to engineering specs or from blueprint drawings, with tolerance held to ±.0001 in. and surface finishes down to 5 RMS. Specialties include machining Titanium and 17-4PH, and secondary capabilities include safety wire hole drilling. All products...

Read More »
Low Pressure Return Line Fittings
Fittings

Low Pressure Return Line Fittings

PIRTEK USA is pleased to announce the addition of low pressure return line fittings to its range. PIRTEK is mainly known for its quick response fleet of service trucks which are capable of replacing high pressure and hydraulic hoses on site. This new line of low pressure fittings gives customers the opportunity to call out a service truck or visit one of the PIRTEK Hose Shops and get a...

Read More »
Brennan Industries Offers Custom-Made Fittings To Meet Users' Exact Needs
Fittings

Brennan Industries Offers Custom-Made Fittings To Meet Users' Exact Needs

CLEVELAND - April 2008 - Brennan Industries Inc. has the capability to manufacture custom designed fittings, solving users' unique design problems where standard fittings are not feasible. OEM designers simply provide Brennan Industries specs of the desired custom fitting. Per the customer's concept or request, Brennan can provide a drawing, prototype or production run of the unique fitting....

Read More »
Modular Fitting is designed for retail wall racking systems.
Miscellaneous Fixtures

Modular Fitting is designed for retail wall racking systems.

Made of high tensile strength aluminum/magnesium alloy 535, 2-piece Model 104S-6 Side Outlet Cross Modular Fitting can be used in any structural application using 1 in. IPS components. Electrolytic corrosion free alloy can be used with other metal, including carbon or stainless steel. It can attach to and detach from existing structures, and are intended for modifying or upgrading existing...

Read More »
Fittings

Fittings suit aerospace and military industries.

Designed to meet stringent military requirements, Aerospace Hydraulic Lubrication Fittings are available in carbon steel, stainless steel, and Monel with straight, 30°, 45°, 65°, and 90° configurations. Units meet Society of Automotive Engineers standard AS35411, which requires detailed performance tests, extensive documentation, and traceability of materials.

Read More »
Combination Coupling allows joining of EMT to 2 AC/MC cables.
Fittings

Combination Coupling allows joining of EMT to 2 AC/MC cables.

Model 4157-DC is duplex AC/MC connector with cable range from 14/2 to 10/3 metal clad cable and ¾ in. electrical metallic tubing (EMT). Couplings' internal dimension allows conductors to pass through to EMT conduit without damaging conductor insulation. Transition fitting is suited for new construction and retrofit applications in schools and commercial buildings.

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers