Fittings

AutomationDirect Adds Pneumatic Tubing & Fittings
Tubes and Tubing

AutomationDirect Adds Pneumatic Tubing & Fittings

Cumming, GA --- April 29, 2009 --- AutomationDirect now offers NITRA(TM) pneumatic tubing and fittings for use in compressed air applications. NITRA tubing is available in polyurethane and nylon styles, in inch and metric sizes from 5/32 inch or 4mm up to 1/2 inch or 12mm; tubing is available in 100 and 500-foot packages. Polyurethane tubing is available in black, blue and clear, and has a...

Read More »
Tregaskiss to Showcase TOUGH Products at Western Manufacturing Technology Show & Conference 2009
Tooling Fixtures

Tregaskiss to Showcase TOUGH Products at Western Manufacturing Technology Show & Conference 2009

WINDSOR, Ontario. April 27, 2009- Recognizing manufacturers need long-lasting, cost-saving welding products-especially during these tough economic times-Tregaskiss will showcase its innovative MIG welding guns and consumables at the Western Manufacturing Technology Show & Conference 2009 (WMTS), June 16 to 18 in Edmonton, Alberta, Canada. The company will share Booth #2044 with other companies...

Read More »
SSP Supplies Restricted Tolerance Controlled Instrumentation Tubing
Tubes and Tubing

SSP Supplies Restricted Tolerance Controlled Instrumentation Tubing

April, 20, 2009 - SSP, a manufacturer of instrumentation fittings and valves, now supplies 316/316L instrumentation tubing. SSP Tubes incorporate tighter tolerance controls than what is allowed by common industry standards such as ASTM A213, A269, and EN 10305. These restricted tolerance controls improve the performance and safety of small bore piping systems. Safe installation and operation of a...

Read More »
Largest On-Line Selection of Plastic Barb Fittings
Fittings

Largest On-Line Selection of Plastic Barb Fittings

Industrial Specialties Mfg. has one of the world's largest selection of plastic barb fittings. With such a wide choice in barb styles and configurations, Industrial Specialties Mfg. is the best source for finding a plastic barb fitting for your specific application. The Standard barb style is characterized by a longer barb that extends the sealing surface of the fitting. Tubing is expanded from...

Read More »
CMAA Crane Buyer's Guide
Sponsored

CMAA Crane Buyer's Guide

CMAA has organized this Buyer's Guide to promote standardization and to assist prospective buyer's of electric overhead traveling cranes in selection of equipment most suitable for their applications.

Read More »
Instrumentation-Grade Tube Fittings are interchangeable.
Fittings

Instrumentation-Grade Tube Fittings are interchangeable.

Double-ferrule instrumentation-grade fittings feature interchangeable nut and ferrule sets, which enables installer to use one tube fitting manufacturer's nut and ferrule sets within body of another manufacturer. They also have intermixable components that work with those of several other manufacturers. Each fitting is packaged in its own pouch and thread-protector to keep fitting clean from...

Read More »
IP 68 Rated Cable Glands
Cable Clamps

IP 68 Rated Cable Glands

For your wiring applications that require a water tight seal and/or strain relief, Alliance Plastics now offers a line of NPT threaded Cable Glands in standard straight styles or right angle designs. Cable Glands are easy to install in either through holes with the use of an optional lock nut or by installing into a female threaded hole. Stocked sizes range from Â-¼ to 1-¼" NPT and...

Read More »
Fittings are designed for semirigid tubing.
Fittings

Fittings are designed for semirigid tubing.

Premium Grade Hard-Line Series Fittings feature barbs molded without parting for optimized seal and suited for use with tubing such as Polyethylene 55 Shore D and Polypropylene 80 Durometer. Barb has sharp sealing point eliminating need for suck-down around trailing edge, with sizes fitting tubing IDs of 1/16, 1/8, 5/32, 3/16, and Â-¼ in. Designed for semirigid tubing, fittings are available...

Read More »
Fittings

Tube Fittings eliminate deformation due to overtightening.

Walterscheid(TM) WALPro(TM) Metric Flareless Tube Fittings feature 2-edge cutting ring that combines maximized axial strength and radial flexibility, providing 360° tube seal. During assembly, cutting edges penetrate tube while top area of profile ring seals along 24° surface of fitting body. Units exceed both DIN 2353 and ISO 8431-1 requirements and are available in full range of standard...

Read More »
Fittings

World Wide Metric Offers CAST S.p.A. Hose and Hose Fittings

World Wide Metric offers CAST S.p.A. Hose and hose fittings. The hydraulic hose range includes: SAE 100R1AT and R2AT (standard and high temperature are available), SAE 100R16 and with Multi-spiral capabilities in 4SP and 4SH. We offer a thermoplastic hose range with hose to SAE 100R7 and SAE 100R7TM. Our 2-piece hose fitting range includes: Metric to DIN 2353, JIC to SAEJ514, NPTF, BSPT, BSPP to...

Read More »
Fittings

Garlock Gaskets Help Boost Pressure Capability of New Corzan® CPVC Flange Kits

Palmyra, N.Y., February 16, 2009 - Stress Saver® XP gaskets from Garlock Sealing Technologies allow pump, valve and other connections made with The Lubrizol Corporation's new Corzan® High-Pressure Flange Kit to withstand the same pressure as the Corzan CPVC piping systems in which they are installed. As a result, these flanged joints are no longer limited to the 150 psi rating of...

Read More »

All Topics