Finishing Equipment

Spray Pump applies adhesives and coatings.
Finishing Equipment

Spray Pump applies adhesives and coatings.

Available in stainless steel or carbon steel, Pogo Plus provides continuous delivery of low to medium viscosity coatings and adhesives. Unit, with 2-ball design, uses double-acting pumps that deliver material on up and down stroke. Features include upper ball check, energized upper U cup, and 2 in. air motor with unbalanced valve design. Contained leak path prevents material build-up on drum, and...

Read More »
CNC Gear Grinder uses 2 wheels in one operation.
Gear Grinders

CNC Gear Grinder uses 2 wheels in one operation.

Model GS:GÂ-² 5-axis CNC gear grinder allows rough and finish grinding of hardened precut gears in one operation. Menu-driven control with Gear Smart(TM) programming allows part changeovers in 15 min. Other features include CNC contour diamond roll dressing, constant surface speed, variable wheel and work speeds, CNC controlled helix and work rotation, and ability to grind from Mod 50 to 3...

Read More »
Finishing Machine includes dividers to protect parts.
Finishing Equipment

Finishing Machine includes dividers to protect parts.

End-discharge, automated, vibratory finishing machine Model V-34 features 4 compartments that protect parts from damage. It measures 17 ft long and has 34 ftÂ-³ capacity. Compartments of U-shaped, urethane-lined tub are created by removable dividers that allow parts up to 24 in³ to be in tub at same time. Variable amplitude of machine provides adjustment range of 1/64 to 1/4 in. on...

Read More »
Finishing Equipment

Finishers offer capacities from 1-8 cubic feet.

Walther Trowal® TT Series of Centrifugal Disk Finishers consist of cylindrical work bowl with rotating disk that creates centrifugal force, transporting media and parts up stationary wall of work bowl. Upon reaching top of bowl, material is pulled back to disk via gravity. Finishers include motor overload protection, process timer, hour meter, dosing system controls, and E-stop. Dosing...

Read More »
CMAA Crane Buyer's Guide
Sponsored

CMAA Crane Buyer's Guide

CMAA has organized this Buyer's Guide to promote standardization and to assist prospective buyer's of electric overhead traveling cranes in selection of equipment most suitable for their applications.

Read More »
Finishing Machine uses centrifugal disc technology.
Finishing Equipment

Finishing Machine uses centrifugal disc technology.

ECO-maxi can use water/compound mixture to deburr and radius parts turned and milled on CNC machines, as well as same water/oil emulsion as CNC machine itself. It combines wet grinding/polishing, dry grinding/polishing and magnetic polishing by using interchangeable bowls for each process. Finish can be achieved in 20 min. Machine is suitable for CNC produced parts as well as parts formed by...

Read More »
Finishing Equipment

End of arm device suits finishing applications.

UltiBurr 630, equipped with 0.88 hp quiet air motor, performs burr removal and polishing operations on metals and plastics. Robot program continuously varies compliance force applied to workpiece by changing air pressure to tool's compliance unit, allowing for automated changes in application characteristics. Variably-compliant end-of-arm device is compliant in all three dimensions (x, y, and z),...

Read More »
Radial Bristle Brushes are offered in 6 in. diameter.
Applicator / Finishing / Cleaning Brushes

Radial Bristle Brushes are offered in 6 in. diameter.

Abrasive-filled brushes clean and finish hard-to-reach areas around protrusions and bosses or detail grooves and patterns. Flexible bristles apply continuous, fresh supply of sharp mineral to workpiece, providing uniform finish, while being gentle to base material and surrounding details. Available in color-coded grades, bristles conform to problem sanding areas without loose-flying wires....

Read More »
Vibratory Finisher offers 500 lb capacity.
Finishing Equipment

Vibratory Finisher offers 500 lb capacity.

Model KVF3 provides deburring, polishing, and finishing operations where vibrating action of rotating media is required. It includes 3.3 cu ft capacity steel tube with cast urethane lining; Â-¾ hp, single-phase, 110 Vac motor; and steel construction. Unit measures 36 x 27 x 36 in. and features casters for portability.

Read More »
Finishing Equipment

Finishing Machine has wet dust collector.

Dry finishing/grinding Model TT 1D-1100 has abrasive belt head with 2 speeds and runs conventional abrasive belts and Scotch Bright(TM) belts. Disc section can run Scotch Bright(TM) discs, Bear Tex(TM) discs, Nylon-bristle brush discs and 2 kinds of abrasive-section Spider discs; as well as planetary discs with mixed media brushes. Spider discs round edges and remove oxides from vertical edges of...

Read More »
Finishing Machine has 22 ft long radius channel.
Finishing Equipment

Finishing Machine has 22 ft long radius channel.

Automated, continuous thru-feed Model XLR-22 features round-bowl design for deburring and finishing of metal parts. Cycle/separation options include continuous once-around-and-out processing, or batch cycling for parts requiring longer deburring exposure. Bowl is 8 ft in diameter and lined with 1 in. cast-molded urethane for parts protection. It has 8Â-¼ in. tub cross-section, full-length...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics