Finishing Equipment

New Tube & Rod End-Finishing Machine from Manchester Tool & Die
Deburring Machines

New Tube & Rod End-Finishing Machine from Manchester Tool & Die

Manchester Tool & Die, Inc. now offers Pines Technology Model 660 Tube & Rod End-Finishing Machines for fast and simultaneous deburring, ID / OD chamfering, and facing. Model 660 includes two models, a manually operated and an air operated machine for finishing up to 1,500 ends per hour and 1,875 ends per hour, respectively. These end-finishing machines offer cost savings by freeing lathes and...

Read More »
Welding End Prep Tool Fits between Small Boiler Tubes
Tube / Pipe / Hose Cutters and Cutting Machinery

Welding End Prep Tool Fits between Small Boiler Tubes

An air-powered, right angle welding end prep tool that is designed for stainless steel tubes and others with a high percentage of chrome and fits a Dutchman" is available from ESCO Tool of Medfield, Massachusetts. The Esco "Ground" MILLHOG® is a right angle drive I.D. clamping welding end prep tool for water wall boiler tube panels from Â-½" I.D. to 2¼" O.D. by ½" thick...

Read More »
Finishing Flap Discs blend and grain-in stainless steel welds.
Flap Discs

Finishing Flap Discs blend and grain-in stainless steel welds.

Rex-Cut® Megabrite T27 Finishing Flap Discs are offered in 3 grades including coarse, medium, and fine grits for cleaning, deburring, blending, and finishing stainless steel, aluminum, and other metals. Featuring smooth, controlled action, they are constructed with layers of non-woven synthetic fiber surface conditioning materials. Available in 4Â-½ and 5 in. dia sizes with 7/8 in....

Read More »
Air-Powered Finishing Sander captures dust, contaminants.
Finishing Equipment

Air-Powered Finishing Sander captures dust, contaminants.

Used on materials such as metal, wood, carbon fiber, fiberglass, and composites, Vacuum Dynafine Detail Sander is suited for sanding into corners and tight areas on furniture, moldings, and door jams. It operates at 13,000 rpm and features 1/32 in. dia orbital pattern for producing optimal finish quality. Offered in self-generated vacuum or central vacuum models, sander diverts dust, debris, and...

Read More »
Finishing Equipment

Vibratory Finisher uses gentle action, rotating media.

Suited for deburring, polishing, and other finishing operations requiring gentle vibrating action of rotating media, Model KVF3 is constructed of steel and measures 36 x 27 x 36 in. Design enables quiet operation and includes 3.3 ftÂ-³ capacity steel tub with cast urethane lining; ¾ hp, single-phase, 110 Vac motor for vibratory action; and casters for portability. Total capacity is...

Read More »
Spray Guns

DeVilbiss Announces Family of Automatic and Manual Compact Performance Series at 2008 International Woodworking Machinery and Furniture Supply Fair

Glendale Heights, IL - ITW Industrial Finishing, manufacturers of DeVilbiss industrial spray finishing equipment, will be showcasing the new Compact Performance Series spray guns at the 2008 International Woodworking Machinery and Furniture Supply Fair. The Compact spray gun series provides a superior finish and high transfer efficiencies while optimizing energy savings through reduced air...

Read More »
Diaphragm Pumps

Binks to Showcase Broad Range of Equipment at 2008 International Woodworking Machinery and Furniture Supply Fair

(June 2008) Glendale Heights, IL - ITW Industrial Finishing, manufacturers of Binks industrial spray finishing equipment, will be featuring a number of wood finishing spray guns, pumps, and outfits at the 2008 International Woodworking Machinery and Furniture Supply Fair. Located at Booth 2042, Binks featured products include: o The Binks Gemini DVP Diaphragm Pump Outfits o The Binks AA1500 and...

Read More »
Compact Gas Finish Nailers are lightweight and maneuverable.
Finishing Equipment

Compact Gas Finish Nailers are lightweight and maneuverable.

Including 3 models each with capacity of 100 nails, gas finish nailers combine lithium ion battery technology and gas fuel cell to hold fasteners up to 2Â-½ in. in length. Model NT65GS applies 16 ga fasteners from straight magazine, while angled 15 ga NT65GA and angled 16 ga NT65GB allow for easy maneuverability in tight corners and spaces. Units feature double actioned nail feed and...

Read More »
Twin Turret Chucker provides 4-axis ID/OD diameter cutting.
Machining Centers

Twin Turret Chucker provides 4-axis ID/OD diameter cutting.

Suited for medium to high-volume production, Model PBS-300TT features rigid box way construction and 3-axis dual hand gantry robot offering carrying capacity of 6.6 + 6.6 lb and conveying diameters up to 7 x 4.7 in. Robot controller facilitates simultaneous multi-axis movement to access front, back, left, and right of traverse axis. Operating at max spindle speed of 3,000 rpm, chucker generates...

Read More »
Parallel Kinematic Machine offers 88.9 m/min rapid traverse.
Milling Machines

Parallel Kinematic Machine offers 88.9 m/min rapid traverse.

Offering 5-axis interpolated machining, Tricept T9000 can perform milling, drilling, routing, deburring and finishing, optical inspection and touch probing, fastener/rivet installation, and friction stir welding. Each strut delivers 990 mm stroke, giving machining reach of metric/inch in both X and Y and metric/inch in Z. Equipped with 6,000 rpm, 50 hp HSK63 spindle, machine delivers ±0.038...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers