Finishes

Antiquing Concentrate works on various metal surfaces.
Finishes

Antiquing Concentrate works on various metal surfaces.

Suited for producing brown and black finishes, M25 Antique Black® may be used on copper, brass, and bronze alloys as well as zinc die castings and zinc plated surfaces. Product, mixed with water at 10-20%, is suited for blackening or browning copper and brass alloys. Mixed at 5-10%, product is suited for blackening zinc. It works at room temperature, forming tightly adherent conversion...

Read More »
Blackening Gel works on iron and steel substrate parts.
Miscellaneous Compounds

Blackening Gel works on iron and steel substrate parts.

Available in 1 and 5 gal containers and ready for application, PRESTO BLACK® GEL can be used on any size part in limited quantities. After cleaning part surface, user swabs on layer of product with synthetic paintbrush and allows Gel to work for 2-10 min. Gel adheres to metal surface and blackens uniformly without running off, even on vertical surfaces. Resultant protective black finish...

Read More »
Antique Finishes provide accurate coloration.
Finishes

Antique Finishes provide accurate coloration.

Antique Finishes provide range of colors and tones on most metal surfaces including steel, brass, bronze, copper, pewter, aluminum, silver, nickel, and zinc. Color ranges can include black, golden to chocolate browns, and other red or green color variations, depending on application. Processes are operator-friendly, utilizing room temperature solutions that produce no fumes. Finishes are suited...

Read More »
Epoxy Floor Resurfacer creates chemically resistant surface.
Resurfacers

Epoxy Floor Resurfacer creates chemically resistant surface.

Non-shrink TREFLITE(TM) bonds to concrete, wood, steel, aluminum, glass, and ceramic surfaces to provide nearly indestructible finish to old and new floors. Resistant to thermal and physical shock, abrasions, acids, alkalis, and solvents, product also resists steel-wheel traffic with compressive strength of 14,000 psi. Resurfacer is 100% non-skid, even when wet, and no special tools or skills are...

Read More »
Polymer produces high-solids floor finishes.
Finishes

Polymer produces high-solids floor finishes.

Megatran® 248 produces floor finish formulations that are easily applied and repaired, and perform well over wide range of temperatures and humidities. Glossy finishes respond well to burnishing, low-speed spray buffing, and frequent ultra-high-speed maintenance. Use of sulfate and sulfonate groups attached to polymer backbone stabilize polymer emulsion particles during drying process.

Read More »
Water-Based Epoxy suits industrial/marine applications.
Coatings

Water-Based Epoxy suits industrial/marine applications.

Fast Clad(TM) DTM, single-coat, direct-to-metal epoxy finish, provides high film build in one coat of 4-6 mils dry film thickness. Product dries to tough gloss finish, providing corrosion and chemical resistance as well as weathering protection. Applied at 77Â-ºF, it dries to touch in 45 min and is dry to handle in 4 hr. Low-odor coating meets VOC and HAPS requirements, cleans up with water,...

Read More »
Polymer produces durable floor finish.
Finishes

Polymer produces durable floor finish.

Megatran® 233 features high gloss characteristics with scuff and scratch resistance. Due to high solids content, formulations based on Megatran 233 polymer require fewer coats than are needed with conventional lower-solids formulations. Use of sulfate and sulfonate groups attached to polymer backbone stabilize polymer emulsion particles during drying process. Finishes respond well to...

Read More »
Floors

Flooring Systems are flexible, seamless, and waterproof.

Two-component, 100% solids, pigmented, polyurethane-base Soft Floor Systems are suitable for balconies, ramps, locker rooms, hospitals, and skating rinks. Soft Floor 6000 is topped with polyurethane or pigmented Polyurea. It can be applied between 10 and 250 mils in one pass without bubbling due to out gassing. Soft Flake 6001 is broadcast with colored vinyl flakes and top coated with clear...

Read More »
Resins

Special Effects Resins create colorful molded parts.

EFFECTIONS special effects resins come in array of looks, including metallics, glitters, fluorescents, translucents, color shifting, marble, and pastels. Base finishes are customized for each application. Finishes are not only available as pre-colored formulations, but also as color concentrates for use with PROMATCH SM Self-Coloring Service.

Read More »
Epoxies have no hazardous air pollutants.
Chemical Primers

Epoxies have no hazardous air pollutants.

Steel Plus epoxies provide packaging and processing machinery with resistance to harsh CIP sanitation and corrosive chemicals, and are impervious to high-pressure washdown and other severe factory conditions. They have no odor and can be applied to steel, galvanized steel, tin, and aluminum. Epoxies are quick drying, resistant to alkalines and acids, and available in 1 or 5 gal sizes. They can be...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics