New Filters Products

Plasma-Cutter Filter has no dampers or moving parts.

Plasma Cutter Filter System removes smoke and dust from cutting area directly. Zipper-duct design allows filter head to move with cutter head, pulling polluted air away from cutter. Fan may be located inside or outside plant. Complete air system is available with or without plasma cutting table, and is prefabricated for installation with existing cutters. It requires power source of only 5 hp.

Filter Assembly protects laser gas supply.

Series 580-6001 provides 2.0 micron filtration and is suitable for all laser systems using helium, nitrogen, carbon dioxide, and/or premixed resonator gases. Assembly, with stainless steel body, connects directly to gas inlet on laser. It includes stainless steel compression-tube fittings, stainless steel filter element, and shut-off valves. Filter element can be replaced by removing locking cap...

Cartridge Filter has larger filter area.

Deep Pleat cartridges have more filter area than conventional pleated synthetic media. Pleats are 50% deeper because MikroBoss(TM) media prevents pleats collapsing under operating pressure. Increased filter area lowers pressure drop, reduces cleaning frequency, increases capacity, and improves filter life. Media is available in spunbond and spunlaid polyester and polypropylene, as well as PTFE...

Reverse Osmosis System purifies water for lab use.

DIamond RO provides source of purified water for glassware washing or as feed water to ultrapure water systems, such as NANOpureÃ-® DIamond(TM), EASYpureÃ-®, or E-pure. Three systems are available for product water flow rates up to 6, 12, or 24 liters per hour. DIamond RO can be bench or wall mounted.

Cold Forming: A Cost Effective Alternative to Machining Small Parts

Cold forming offers tight tolerances, dimensional stability, and advanced surface finishes, while also saving you in raw material wastes costs.

Rotary Vaccum Filter removes suspended solids from slurries.

Auto-Vac filter removes suspended solids and dewaters sludges from air flotation units, clarifiers, wet scrubbers, flocculators, chemical precipitation, process liquors, paint spray booths, and cutting tables. It is self-cleaning with every revolution. Diatomaceous-earth filter media removes solid particles as small as 0.5 micron from liquid. Solids are continuously removed from surface of filter...

Carbon Filters come in 1, 2, and 4 in. thicknesses.

Fresh Air Filters have 30 to 35% MERV 8 prefilter layer, followed by layer of activated carbon media containing 200 grams per square meter. Carbon media is sealed in sleeve of spun bonded synthetic scrim to prevent dusting. Combination media is completely self-supporting and requires no metal backing. MERV 8 efficiency rating means filters achieve minimum of 70 to 85% efficiency on 3 to 10 micron...

Power Entry Module exceeds power limits.

EF Series includes AC inlet and circuit breaker, UL rated up to 20 A at 250 V. Circuit breaker provides manual reset of circuit and status indication depending on switch position (I/O). It is recessed in flange to protect against inadvertent actuation. Filter options meet standard and medical grade attenuation requirements at 12, 16, and 20 A. Direct electrical contact of filter to chassis...

Gravity Filtration System works unattended.

Automatic Gravity Filtration System is designed to filter intermittent or continuous, high or low flows with constant or varying, heavy or light contaminant loads. Models are available from 16.5 to 1.5 sq ft of filtration surface. Automatic indexing fabric filters are suited for filter grinding swarf, machining oils and coolants, cooling tower water, industrial wastewater streams, and water wall...

Filters are available with optional large-tube body.

AFR Series design replaces multiple valves found in systems with single rotating diverter. Actuator design provides more power and torque than original AFR, and is rated for more rotations. Optional 6 in. tubes enable unit to address filtration at low retentions and high flows. They are suitable for flow capacity at low, flow-restricting retentions of less than 100 microns.

Filter Dryer produces dry cakes.

RT(R) filter can be used with either hot-gas drying or infrared drying. Filter is available in open, fume tight, gas tight, and pressure tight configurations, and with full sanitary configuration to meet cGMP requirements. For hot-gas drying, segmented tray design makes it easy to use specific tray sections as hot gas drying zones. Hot gas can be air, nitrogen, or steam. Infrared drying can be...

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.