New Filters Products

Filtration System removes contaminants in hydraulic oil.

Portable Hydraulic Oil Filtration System connects to injection molding machine oil reservoir through 2 lines and can be equipped with quick connect/disconnect fittings. Flow rates range from 3-24 gpm and filter through 3 filtration stages. Using cycle of passes through system, 98% of all contaminants are removed, extending hydraulic oil life 8-10 times or more.

Exhaust Trap recirculates reclaimed oil.

MV Maxi-Mist(TM) Oil Mist Eliminator high-capacity exhaust trap has parallel bank of five pleated microfiberglass coalescing filter elements with 0.1 Ã-µ pore size and 99.9999% efficiency. Product eliminates oil mist from industrial vacuum pumps used in casting, coating, chemicals, metal injection molding, etc. Trap is stainless steel with 10 in. dia. and 13.5 in. height, with 50 mm NW flange...

Air Filtration System suits robotic welding industry.

Self-contained RoboVent(TM) captures contaminated air, including fumes and microscopic metals, as they are produced in robotic welding cells. It cleans and recycles contaminated air, returning clean air into plant and helping to maintain healthy working environment. RoboVent captures 100% of weld smoke, allowing nothing to escape into plant. Pleated filtering system is treated with oil-absorbing...

Filter Element delivers high flow rates.

HAYFLOW(TM) consists of 2 concentric cylinders, made of polypropylene or polyester extended-life, needle-felt media, with SENTINEL sealing ring for positive seal. Fabric welding technology forms layers with no-by-pass seam. Diameter of cylinder is same size as standard filter bag to facilitate retrofitting into existing systems. Surface area is 70% greater than standard filter bags. High flow...

Peristaltic Pump Vs. i-FILL® Technology

Intellitech's advanced i-FILL® pumps are used by companies working in some of the world's most demanding sectors, delivering innovative, highly accurate and repeatable results, ensuring ultimate reliability and ease of use for all of our clients.

Bandstop Filter provides deletion within 72-76 MHz band.

Model 14972 offers passbands of 5-71.75 MHz and 77.25-1000 MHz, with passband loss of 3 dB at band edges. Stopband attenuation is 50 db between 73-76 MHz and 40 dB between 72.75-76.25 MHz. Impedance is 75 ohms, with F-female connectors as standard. Unit is mounted in 3.5 in. high rack chassis. Filter provides deletion in band used for pilot tones, QAM signals, and other auxiliary services with...

Dual Filter provides matched response.

Model LT1568 ultra low noise (92 dB SNR) filter provides one pair of matched second order filter sections integrated on one chip. Matched filter response, gain, and phase repeatability from channel to channel is suited for I/Q applications. Internal passive and active circuitry is precisely trimmed for predictable and repeatable performance. Offered with single-ended or differential outputs, unit...

Pre-Separator prevents material from contaminating system.

Filtered, pre-separator heavy-duty collection tank can be integrated into central vacuum systems and reduces threat of cross-contamination in pharmaceutical manufacturing. Unit connects to central system's outlets, and is powered by system's suction. All powders are filtered and held within pre-separator's tank. Materials of 0.3 Ã-µ are retained with multi-stage HEPA filtration system that is...

Herding Filter suits automotive applications.

Silicone- and textile-free filters allow paint to adhere properly to vehicle surface. They prevent dust and fine particles from being drawn into vacuum pump and escaping into surroundings. Products comply with FDA, GMP, and 3-A requirements and are suitable for powders with particle size of .5 micron and greater, depending on powder properties. Sintered polyethylene body is coated with PTFE.

Multi-Bag Filter Vessel reduces bag change time to 15 sec.

Suited for industrial and commercial applications, SE MAXILINE(TM) reduces downtime required for filter media changing. Design incorporates spindle/interlock mechanism with integral QIC-LOCKÃ-® clamp, which prevents cover from being opened until vessel has been properly vented. Vessel cannot be re-pressurized until clamp has been fully closed and safety interlock engaged. Low-profile design...

Seamless Metal Tubes range up to 1 in. in diameter.

Porous Metal Tubes are produced by isostatically pressing powdered metal in molds, resulting in seamless tube structure that is then sintered to form rigid porous filter tubes. Tubes can be incorporated, with various hardware, into cartridge filters, gas spargers, applicators, and air rollers.

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.