Fiber

Converting Diverter Dampers from Stone Wool to Superwool® Plus Blanket Yields Labor and Fixture Savings
Blankets

Converting Diverter Dampers from Stone Wool to Superwool® Plus Blanket Yields Labor and Fixture Savings

When Esscano Power A/S wanted to improve its diverter damper insulation from mineral wool (rock wool) material, the company examined all the available alternatives, ultimately locating numerous online references to high temperature insulation wool from Morgan Advanced Materials. After heat calculations demonstrating that its Superwool® Plus blanket material would reduce total insulation...

Read More »
Fiber

Multimode Fibers improve connectivity in data centers.

With properties that can provide extra margin (headroom) in 10, 40, and 100 Gbps applications, 50 micron multimode fibers, including LaserWave® FLEX bend-optimized fiber, promote network design flexibility and reliability. For 50 micron multimode fibers meeting OM4, OM3, and OM2 standards, 850 nm attenuation specification is ≤2.2 dB/km. Clad diameter toleranceÂ- is 125.0...

Read More »
Fiber

Single-Mode Fibers meet/exceed in-building bend requirements.

With performance superior to and compliant with both ITU-T G.657.B3 and G.652.D recommendations, AllWave® FLEXMax Fiber provides less than 0.10 dB of 1,550 nm loss atÂ- 5 mm bend radius. Capacities suit in-building and connectivity applications. Superior to and compliant with G.657.B3 and fully compatible with G.652.D fibers, EZ-Bend® Fiber offers less than 0.20 dB of 1,550 nm...

Read More »
Bilsing Automation Tooling Saves Millions in Robot Investment
Fiber

Bilsing Automation Tooling Saves Millions in Robot Investment

Carbon fiber solution enables use of smaller payload equipment Clinton Township, MI - Bilsing Automation has recently proved out the value of its carbon fiber tooling solutions on a recent project where it saved an integrator over $2.7 million in robot investment by enabling use of smaller payload models. The project involved 18 robots that were unable to meet processing requirements when...

Read More »
Fiber

Ultra-High-Temperature Sealing Material comes in sheet form.

Available in gaskets as well as 40 x 40 in. sheets with fiber core thicknesses of 1/16 and 1/8 in., THERMa-PUR™ Sealing Material is produced by solvent-free process that combines blend of raw materials with flexible fiber core. Non-oxidizing formulation provides optimal sealing effectiveness at temperatures up to 1,800°F, including extreme cycling conditions. THERMa-PUR is suitable...

Read More »
Fiber

Curiosity Rover Lands Safely with the Help of Super Fibre Technora

ARNHEM, The Netherlands - Slowing Down From 1450 to 290 km/h in Less Than Two Minutes After a 100-million-kilometre journey, NASA's Curiosity Rover arrived safely at its final destination: Mars. Once the Curiosity Rover had entered Mars's atmosphere, it slowed down - aided by its enormous parachute and Teijin's super fibres - from a speed of 1450 km per hour to 290 km per hour. And that in less...

Read More »
Medical Monofilaments support X-Ray and MRI applications.
Fiber

Medical Monofilaments support X-Ray and MRI applications.

Available in 0.025-0.100 in. diameters, Custom Medical Monofilaments are manufactured from nylon, polypropylene, polyester, polyurethane, and thermoplastic elastomers. These non-magnetic, lightweight, and high-strength filaments are transparent to X-rays and suited for tension components used in minimally invasive devices and magnetic resonance imaging.

Read More »
Fiber

Naturally Advanced Technologies and Lenzing Fibers Enter into a Joint Development Agreement

CRAiLAR Flax to be blended with the Lenzing Fibers TENCEL® and Lenzing Modal® Performance and Sustainability in Fashion, Sport at Core of the Global Development Goals VICTORIA AND PORTLAND, OR - Naturally Advanced Technologies Inc. ( NAT" or the "Company") (TSXV: NAT) (OTCBB: NADVF), which produces and markets CRAiLAR®, a natural fiber made from flax and other bast fibers,...

Read More »
Norton BlueFire(TM) Product Line Tier Upgraded to New Performance Zirconia Alumina Grain
Abrasive Belts

Norton BlueFire(TM) Product Line Tier Upgraded to New Performance Zirconia Alumina Grain

All Norton Better" tier NorZon (zirconia alumina) products for portable grinding applications are being upgraded and unified under the Norton BlueFire brand. WORCESTER, MA, USA - Saint-Gobain Abrasives - Norton, the world's largest abrasives manufacturer and leader in metal fabrication abrasive products for over 125 years, is implementing a performance upgrade across their "Better" tier of metal...

Read More »
Fiber

First Heavy Lift Job with Twaron Stay Cables Successfully Completed

ARNHEM, The Netherlands - Heavy lift and transport specialist BigLift Shipping successfully completed the first job with their new super fly jib. Initiated by Huisman the first ever super fly jib was equipped with special Twaron stay cables to lengthen the crane to a radius of 55 meters. The aramid fiber Twaron is lightweight and five times stronger than steel. This results in a reduced...

Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
Sponsored

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.

Read More »

All Topics