Fiber Optic Cable Assemblies

Electronic Components & Devices

Fiberoptic Slipring

Fiberoptic Systems was invited by the customer to participate in the design and manufacture of a datalink to provide high speed bi-directional data between the base of an 'azimuth' 3D laser scanner and its rotating vertical scanning component with the following features: - compatible with commercially available WDM bi-directional transceiver modules - low loss in the gap - no optical 'hotspots' -...

Read More »
Electronic Components & Devices

OFS Specialty Photonics Division to Exhibit for the First Time at the 2010 ASLMS Expo

AVON, Conn. - OFS, Specialty Photonics Division (OFS), a leading provider of specialty optical fiber, cable, and assemblies, will exhibit for the first time at the 2010 American Society for Laser, Medicine, and Surgery Conference (ASLMS); located in Phoenix, Arizona, on April 15-17. OFS will showcase its HCXtreme(TM) optical fiber, cable and assemblies designed specifically for the medical...

Read More »
Communication Systems & Equipment

Corning Cable Systems to Highlight Innovation in Fiber-to-the-Antenna Solutions at CTIA Wireless 2010

HICKORY, N.C. - Corning Cable Systems LLC, part of Corning Incorporated's (NYSE:GLW) Telecommunications segment, will feature its innovative Evolant® Solutions for Wireless Networks including fiber-to-the-antenna at CTIA Wireless 2010®, Mar. 23-25, in Las Vegas. In its exhibit (booth #3950), customers will be able to see exactly where Evolant Solutions for Wireless Networks fit into their...

Read More »
Cable Assemblies offer perpendicular mating capability.
Electrical Equipment & Systems

Cable Assemblies offer perpendicular mating capability.

Targeting telecom, datacom, and computer markets, PRIZM(TM) LightTurn(TM) Cable Assemblies use low-profile connectors from US Conec Ltd that mate to Avago Technologies' MicroPOD(TM) 120 Gbps board-mounted parallel optic modules. Perpendicular mating allows for tight spacing of modules and facilitates cable management since modules can be aligned in rows. Mated on top of modules, multi-fiber...

Read More »
Injection Molding from 3D Printed Molds
Sponsored

Injection Molding from 3D Printed Molds

3D printing has become one of the biggest trending technological innovations of the 21st century. With its logistical efficiency, ability to easily modify designs, and speed of production, it’s no surprise that the manufacturing industry is turning to 3D printing for a multitude of applications. This white paper explores how 3D printing can be beneficial specifically for manufacturers focused on low volume injection molding of small plastic parts. The report features a succinct yet detailed overview of two case studies, both of which exhibit the advantages and possible challenges of making molds via 3D printing. The article goes on to offer advice on how such challenges can be overcome, as well as some guidelines for mold design. If you’re looking to break the mold to save time and money, download this white paper and see if 3D printing is the right solution for your business.

Read More »
Electrical Equipment & Systems

Fiber Optic Assemblies withstand harsh environments.

Featuring HLC® SCRATCHGUARD(TM) technology, TFOCA Fiber Optic Assemblies withstand constant handling required in tactical applications. HCL with SCRATCHGUARD technology has been shown to maintain consistent performance over course of 1,000 connector matings, ensure scratch-resistant mating surface that can withstand harsh environments, and prevent performance degrading scratches.

Read More »
Fiber Cable Assemblies target SAN applications.
Electrical Equipment & Systems

Fiber Cable Assemblies target SAN applications.

QuickNet(TM) High Density SFQ Fiber Optic Cable Assemblies feature MTP SFQ cassettes that achieve up to 72 fiber connections each, providing up to 576 fiber connections in 1 RU unit. Assemblies work with QuickNet(TM) Copper System to achieve optimal cable access and management capabilities in data centers as well as main, horizontal, and equipment distribution areas.

Read More »
Electronic Components & Devices

Active Optical Cable meets needs of HPC deployments.

Operating at less than 20 mW/Gbps, low power Blazar 40G Active Optical Cable combines CMOS photonics technology and single-mode fiber to support long reach connectivity of over 4,000 m and utilizes embedded germanium photodetectors with associated receiver logic to detect cable intrusion attempts. Additionally, low power Blazar uses high performance bend insensitive fiber to achieve fiber bent...

Read More »
Electronic Components & Devices

Megladon Announces New Product Release of Full CWDM, DWDM and Splitter Line with Angle Polished HLC

Austin, Texas, October 2, 2009 - Megladon Manufacturing Group adds to their durable fiber optic product line for the CATV and video transmission market. Megladon now offers CWDM, DWDM, coupler and splitter products terminated with angle polished HLC connections. This completes a suite of products that includes all passive fiber optic products from the Node Tail, WDM or coupler inside the node to...

Read More »
Pulse Suppression Box facilitates OTDR field testing.
Electronic Components & Devices

Pulse Suppression Box facilitates OTDR field testing.

Placed between OTDR and link under test, Pulse Suppression Box delivers consistent test results in network certifications. Unit serves as dead zone elimination tool as well as reference grade fiber cable that provides accurate field testing and predictable calibration. Housed in drop resistant, waterproof case, Pulse Suppression Box assemblies use Hardened Lens Contact termination process and...

Read More »
Interconnect System provides copper and optical attach options.
Electrical Equipment & Systems

Interconnect System provides copper and optical attach options.

Offering copper and optical direct attach options for same system port, iPass+(TM) enables 12 channels of 10 Gbps data for up to 120 Gbps of total bandwidth. High-Speed Channel (HSC) pluggable CXP copper and optical interconnect system features unitary press-fit connector and cage assembly that provide one-step placement to host board. CXP 12X direct attach copper cables accommodate single,...

Read More »
Tekna Manufacturing LLC Announces Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industrys premier HBOT system. To learn more, see our video.

Read More »

All Topics