Materials Feeders

Feed System offers reclaim rates up to 1,200 lb/hr per screw.

Granulate Feed System enables plastic film and sheet processors to reclaim and reuse edge trim and roll scrap. Separate chambers feed virgin resins and fluff into extruder to ensure ratio of fluff to virgin is consistently achieved. Variable speed motor-driven auger automatically adjusts feed rate based on speed of extruder. Unit fits in round, square, oval, and rectangular extruder throats...

Read More »
Tube Feeder is compatible with Panasonic placement systems.
Parts Feeders

Tube Feeder is compatible with Panasonic placement systems.

Model MPA-827 Component/Stick/Tube Delivery System feeds small quantities of tube-supplied components to placement systems. Standard tooling plates are available for SOIC 8 to PLCC-100 to SOJ and SOMC footprints. Separate amplitude and frequency adjustment controls ensure smooth part transfer and error-free host machine interface communications. MPA-827 interfaces with Panasonic placement systems...

Read More »
Rotary Airlock Feeders are precision machined.
Materials Feeders

Rotary Airlock Feeders are precision machined.

Available in 6 standard models in up to 9 different sizes, heavy-duty Precision-Aire units offer housings and end plates cast from grey iron. Rotors are fabricated from steel, and vanes are welded onto shaft and then machined. Use of steel prevents vanes from breaking off when foreign objects become lodged between rotor and housing. Standard models can be fitted with specialized rotors, bearings,...

Read More »
Roll Feeds permit on-the-fly micro-adjustments.
Materials Feeders

Roll Feeds permit on-the-fly micro-adjustments.

Servo-Driven Roll Feeds include control panel and software that lets users perform press adjustments in 0.0001 in. increments while feed is running. Additional offerings include cut-to-length cycle, kerf-cut cycle, and 14 gag outputs and programmable patterns. Capable of storing up to 200 jobs, products are available from 0.002-0.315 in. thick and come in push, push-pull, or pull configurations....

Read More »
Volumetric Feeder suits water treatment chemicals.
Materials Feeders

Volumetric Feeder suits water treatment chemicals.

AccuFeed Vibrating Volumetric Feeder provides precision feeding of water and wastewater treatment chemicals. Available in sizes from 1-6 in., with feed capacities from 2.8-600 cu ft/hr, unit is accurate to ±1-2% in feeding materials such as activated carbon, alum, and diatomaceous earth. Polyethylene construction is inert and non-corrosive. Quick disassembly design allows easy cleaning...

Read More »
Materials Feeders

Wire Feeders accept 8 and 12 in. spools.

SuitCase(TM) 8RC and 12RC remote voltage-control wire feeders weigh between 22.5 and 25 lb, permit wire spools in 8 and 12 in. sizes, and perform MIG and flux-cored welding with wires from .023 to 5/64 in. in dia. They are suited for construction, manufacturing, and shipbuilding applications.

Read More »
Coil Cradles

Cradle/Straightner/Feeder offers hands-free loading.

Model CSF handles coil weights from 10,000-60,000 lb and up to 120,000 psi yield material. It accommodates material thicknesses of .040-.750 in. Main unit consists of 1 set of feed rolls, 7 straightening rolls, and 1 set of input threading rolls. Multi-pitch gear train directly drives upper and lower feed rolls throughout feeding process. Solid steel 2-roll coil rest supports and pays off...

Read More »
Bar Feeder automates small lathes.
Materials Feeders

Bar Feeder automates small lathes.

Pneumatic Bar-100 handles stock up to 1 in. dia and provides fully automatic loading of single bars up to 6 ft long using air-driven push rod. When push rod is removed, bars up to 12 ft long can be loaded for manual feeding using bar puller. Draw-tube liner handles bar stock from 0.125-1 in. dia. Tray incorporates scale for measuring bar length. Setup is provided via 3-point leveling system,...

Read More »
System detects fastener length.
Parts Feeders

System detects fastener length.

System verifies length of self-clinching studs and standoffs during insertion process and prevents insertion of incorrect length fastener into parts. Able to detect length variations down to 1.0 mm from correct fastener length, product requires no sensors, tools, or adjustments. System works with InsertionLogic machine control software and is compatible with company's shuttle style tooling for...

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics