Micro Feeder offers rates as low as 20 g/hr.
Materials Feeders

Micro Feeder offers rates as low as 20 g/hr.

Model MT12, offered in loss-in-weight and volumetric feeder versions, is available for continuous or batch operation. Scale in loss-in-weight models can be installed with optional draft shield. Configured for standard industrial or sanitary applications, feeder design allows feeder bowl to discharge almost completely when emptying. Unit will accurately feed rates from 20-2,000 g/hr, depending on...

Read More »
Tube Loader handles 120 tubes/min.
Parts Feeders

Tube Loader handles 120 tubes/min.

Suited for cosmetics and pharmaceutical filling machines, Universal Feeder handles plastic and metal tubes in all available formats. Machine connects to filler and is divided into 3 zones for storage, separation, and conveying of tubes. It holds up to three 24 x 16 in. boxes at once, providing uninterrupted production time of 11 min for 1 in. dia tubes at speed of 100 tubes/min. Controls enable...

Read More »
Quick Change Feeder is designed for short, customized runs.
Materials Feeders

Quick Change Feeder is designed for short, customized runs.

Quick Change/Quick Clean T35/S60 lets user change from single screw S60 to twin screw T35 configuration as material needs change. It handles feed rates from 0.004-160 ftÂ-³/hr depending on material density. Multi-purpose feeder is available with 2 bowl/screw sets that mount to same gearbox and can be cleaned and swapped out in minutes. Available in volumetric and gravimetric models, product...

Read More »
Materials Feeders

Automatic Bar Feeder has bar capacity of 8-80 mm dia.

Master 880 is compatible with all fixed headstock lathes, and feeds round, square, and hex-shaped bars with minimal noise and no vibration. Precise bar feeding and positioning are controlled by CNC with integrated PLC. Machine can be configured with one of 3 large-capacity magazines that can be located on either side. Bar changeover is 35 sec for 12 ft bars. Patented 2-stage Double Pusher feeding...

Read More »
Materials Feeders

Bar Feeder offers changeovers in under 1 min.

Featuring 2,100 x 1,100 mm footprint, CNC-controlled VIP 80E is suited for running low-to-medium sized production volumes of round, square, and hex bar stock. New bar loads into lathe spindle while last piece is being machined. Rear-mounted 10-30Â-º inclined plane loading rack accommodates sixty 10 mm diameter precut bars, and depending on workpiece, VIP 80E can be operated continuously. Max...

Read More »
Materials Feeders

Automatic Bar Feeders handle 5-65 mm bars at 450 mm/sec.

Model TS 560 Rack comes with 3-4 superimposed moveable rack magazine with capacity of seventy 25 mm diameter bars, while Model TS 560 Bundle magazine offers 2.5 ton capacity. Change time is 25-30 sec for 12 ft bars. Feeders can be connected to automatic and CNC lathes, either fixed or sliding headstock, and with any type of bar-working machine. Guide channels made of wear-resistant spring steel...

Read More »
Materials Feeders

Bar Feeder complements high-speed CNC lathes.

Equipped with 300 mm, sloping plane, multi-bar magazine, TAL 65 feeds bars from 5-65 mm at 250-500 mm/sec. Dual bar support principle uses hydraulic immersion and dynamic support in elastic guide channel to provide high-speed feeding, even when bars are slightly bent. Closed-loop re-circulating oil system feeds oil into elastic guide channels, eliminating bar vibration. Mechanical...

Read More »
Parts Feeders

Spindle Machines include integrated bar loader.

Single-spindle, Models Deco 10a and 13a feature Robobar SBF 216, which reduces channel guide changeover time down to 15 min. With quick-change system, operators index guide block to proper size capacity and changeover is complete. System accommodates up to 150 bars in sizes from 2-16 mm. Gripper system adjusts to whatever bar size is being used in machine. All setups are integrated into machine...

Read More »
Parts Feeders

Feeding System feeds half bearings of various sizes.

Feeding System consists of vibratory hopper feeder, 2 linear vibratory feeders, and small parts feeder. Half bearings up to 90 mm diameter can be fed through system at up to 60 pieces/min. Speed can be varied through potentiometer, and electronic controls synchronize speed of components. Up to 150 kg of material can be loaded in vibratory hopper for unattended operation.

Read More »
Vibratory Feeders suit complex material feeding tasks.
Feeders and Feed Systems

Vibratory Feeders suit complex material feeding tasks.

Utilizing Hi-Vi magnetic drive circuit and AC controls, vibratory feeders are able to handle materials from micron size to bulky chunks. They also feature totally enclosed, dust and moisture-resistant magnetic drive that extends coil life and facilitates external cleaning. Single feeders or groups of feeders can be controlled from one station, and controls with solid-state components are...

Read More »
Do You Have Unique Lifting Needs?
Sponsored

Do You Have Unique Lifting Needs?

EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.

Read More »

All Topics