Hopper Feeder feeds various lengths of lumber.
Feeders and Feed Systems

Hopper Feeder feeds various lengths of lumber.

Tyler® Endless Belt Hopper Feeder Model 4011 is 12 ft long and has fabricated steel frame with adjustable legs that allow for off-bearing height range of 32-37 in. Standard feeder capacity is Â-½-2 in. thick, ½-12 in. wide, and minimum of 8 in. long stock. Feeder has adjustable speeds from 50-200 fpm. Adjustable, pillow block mounted pulley maintains belt tension and tracking....

Read More »
Materials Feeders

Welding System is available in various configurations.

Ready-Pak(TM) kits are available in 4 configurations with various power sources to meet application needs. All kits include LF-72 wire feeder featuring 2-roll MaxTrac(TM) drive system for accurate wire feeding. Other components are power source, drive rolls and wire guide, wire feeder control cable, welding gun, work lead and clamp, and Harris® Flowmeter/Regulator and gas hose. Two kits...

Read More »
Materials Feeders

Dispenser is suited for compound management and logistics.

FlexiWeigh 1000 and 2000 offer capabilities for powder and solvent dispensing, inerting of target containers, and capping/uncapping in addition to labeling, sample tracking, and weighing. Floor-standing, fully enclosed cabinets are equipped with XYZ robot with rotating arm and WISC module, which can combine multiple operations at one vial position. Optimally suited for powders in 1-20 mg range,...

Read More »
Self-Feeder has labor- and time-saving design.
Parts Feeders

Self-Feeder has labor- and time-saving design.

Compatible with any Â-½ and 3/8 in. shaft and casing, Wils-Matic(TM) Self-Feeder is designed for cleaning straight tubes up to 45 ft long in heat exchangers, condensers, chillers, absorbers, and coolers. It requires no special brushes or shafts and features auto teach mode, 1 hp motor, and auto-reeling shaft storage. With 125 lb net dry weight, machine has 4.2 fps self-feed rate and 50 lb...

Read More »
Portable Wire Feeder includes Soft Start(TM) run-in control.
Materials Feeders

Portable Wire Feeder includes Soft Start(TM) run-in control.

Voltage-sensing SuitCase(TM) X-TREME(TM) 12VS holds wire spools up to 12 in. and features SunVision(TM) digital meters that display voltage and wire feed speed or amperage, and are visible in direct sunlight. Two drive rolls provide positive feeding with solid wires from .023-5/64 in. and cored wires from .030-5/64 in. Featuring polypropylene case, feeder operates on arc voltages from 14-48 Vdc...

Read More »
Bottom Dispensing Feeder handles CDs, DVDs, and videos.
Parts Feeders

Bottom Dispensing Feeder handles CDs, DVDs, and videos.

Model SPS-200 Inductor dispenses CDs, DVDs, videos, and paperback books at rates of 225 items/min. Available with stand-alone or integrated controls, unit features top-loading design for dispensing onto flat conveyors, and ability to load different size rectangular items at same time. Multiple feeders can be ganged together and bolted directly to conveyor for high throughput requirements.

Read More »
Gravimetric Feeder handles plastic pellets and regrind.
Materials Feeders

Gravimetric Feeder handles plastic pellets and regrind.

Consisting of 1-8 feeders and central microprocessor-based controller, ProRate(TM)/Gravimetric Feeder continuously meters raw materials into central station hopper. Each feeder operates in independent, continuous loss-in-weight scaling mode to insure accuracy of each ingredient. Controller monitors weight signals of each feeder and adjusts auger speed to match recipe feed rate. Unit controls 1-8...

Read More »
Bar Feeder handles various sizes and shapes of bar stock.
Materials Feeders

Bar Feeder handles various sizes and shapes of bar stock.

By changing feed tube size, RHINOBAR can be customized for virtually any size bar stock. Tube sizes range from Â-¼-2¾ in. in 1/8 in. increments, accommodating bar stock diameters from 1/8-2¾ in., and up to 12 ft long. Pedestal and barrel clamps provide stability, preventing whip or spin of bar. Oil fills gap between bar stock and feed tube, acting as noise damping support....

Read More »
Bar Feeder utilizes hydrodynamic forces for operation.
Materials Feeders

Bar Feeder utilizes hydrodynamic forces for operation.

Mini-Rhinobar single-tube bar feeder is engineered for Swiss type CNC screw machines and small, fixed-head CNC lathes. Oil fills gap between bar stock and feed tube, acting as noise damping support. Oil flow and pressure are controlled with single valve, which also allows for accurate bar control and minimizes vibration. Mini-Rhinobar can be controlled from remote pendant for safe operation. Feed...

Read More »
Materials Feeders

Volumetric/Weigh Feeder offers simplified functionality.

Able to feed granular and powdered materials, Series 58QP has front cover that removes without tools in order to facilitate inspection and cleaning. Series is also equipped with direct feed auger drive, NTEP weighing system, digital weighing system, and 4.5 x 3.5 in. LCD display capable of tracking up to 12 independent feeder systems. Metering capacity ranges from 20-5,000+ lb/hr, and products...

Read More »

All Topics