The Multi-Spindle Line Expanded with the " BASIC," a Less Sophisticated and Economical Bar Loader System.
Materials Feeders

The Multi-Spindle Line Expanded with the " BASIC," a Less Sophisticated and Economical Bar Loader System.

The multi-spindle line has been recently expanded with the " BASIC," a less sophisticated and economical bar loader system. The Basic maintains the original lathe feed-out mechanism thus replacing the stock reel. During the loading cycle an electrical motor controlled by a PLC pushes the bar stock through the feed fingers. BASIC features a quick loading time and does not require additional floor...

Read More »
Automatic Bar Feeder features single-spindle design.
Materials Feeders

Automatic Bar Feeder features single-spindle design.

Used for applications such as running hex bar stock, Series One automatic bar feeder includes hydrodynamic bar guide system and spring bushing device inside lathe spindle. Electrical axis uses 2 encoders in constant communication to synchronize bar pusher with moving headstock. System offers control of feed-out to within 0.2 mm accuracy, and is available in magazine rack configuration for bar...

Read More »
Tape Feeders suit high-speed chip placement equipment.
Parts Feeders

Tape Feeders suit high-speed chip placement equipment.

Including PSV sensor that notifies machine and line software when component reels are serviced by operator, High-Performance Gold Feeders support line-level reporting and traceability functionality. They offer continuous splice capability and high speed chip component presentation. Single lane 8 and 12 mm feeders have features for precise and repeatable feeder registration, while 16, 24, and 32...

Read More »
Portable Bin Unloader features loss-in-weight feeding.
Materials Feeders

Portable Bin Unloader features loss-in-weight feeding.

Loss-In-Weight Portable Bin Unloaders allow accurate discharging and metering of material stored and transported in side or bottom discharge portable bins. Weighing is done through low deflection, non-wearing Force Measurement Suspension System (FMSS)flexure scale which measures vertical loading and can take high load directed overloads. FMSS scale design uses counterweights to negate tare weight...

Read More »
Miller To Showcase New Plasma Cutter, TIG Welder, Helmet Designs and More at 2006 Fabtech International/AWS Welding Show
Electrical Power Generators

Miller To Showcase New Plasma Cutter, TIG Welder, Helmet Designs and More at 2006 Fabtech International/AWS Welding Show

APPLETON, Wis., 2006 Miller Electric (booth #23040) will showcase several new products, enhancements to existing products and a new Roadshow semi trailer-- a traveling welding and cutting exhibition, complete with classroom--at the 2006 Fabtech International/AWS Welding Show in Atlanta. New products on display will include the Sycrowave® 200 AC/DC TIG/Stick welder, the Spectrum® 1251...

Read More »
Feed Stations store liquids and other chemicals.
Materials Feeders

Feed Stations store liquids and other chemicals.

Available in 175, 200, and 250 gal capacities, Chemical Feed Stations feature overflow basins and are constructed from high-density crosslink or corrosion-resistant, FDA-compliant, linear polyethylene. Volume markers are designed for optimal visibility, and shelf supports most pumps and metering devices. Along with stackable polyethylene stands, options include fiberglass shelves for pump and...

Read More »
Servo Roll Feeds suit staggered feeding applications.
Materials Feeders

Servo Roll Feeds suit staggered feeding applications.

Designed for staggered feeding applications of 12-30 in. coil widths, press-mounted Zig-Zag Servo Roll Feeds offer processing velocities to 576 fpm and acceleration rates to 70 fps. Y-axis shuttle travel of 4-12 in. provides processing capabilities required for one-out or multiple-out applications. Along with ServoMaster 3 Dual Axis Controller, products feature 500-job memory, true pivoting upper...

Read More »
Friction Feeder handles difficult stocks.
Parts Feeders

Friction Feeder handles difficult stocks.

With dimensions of 20 x 15.5 in., Direct In-Feeder can be integrated into any material handling line, or can function as stand-alone unit. It automatically feeds anything from very fine sheets to most difficult envelopes. Unit also adjusts to feed other flat products including CDs, DVDs, catalogs, and magazines. Load capacity of 11.5 in. minimizes user intervention, while Load-On-The-Fly...

Read More »
Placement Equipment

Cogiscan Develops Traceability Solutions for SIPLACE Machines

May 29, 2006. Cogiscan, Bromont (Quebec), Canada Cogiscan is pleased to announce the beginning of a long-term technology alliance between Cogiscan and Siemens. This collaboration includes joint product development and marketing of Cogiscan Smart Material Control solutions embedded in SIPLACE equipment and software systems. By combining the superior Cogiscan Smart Material Control technology with...

Read More »
Feeders and Feed Systems

Pneumatic Take-Up Unit is designed for engine valves.

Available in PLC and non-PLC controlled versions, Pneumatic Take-up Unit feeds engine valves with diameters from 20-50 mm and between 30-200 mm long at speeds from 40-100 pieces/min. Valves are transported in head up orientation from ground level up to height of 2 m for further feeding at that height. Increased heights are also available to meet application requirements.

Read More »

All Topics