Feeders and Feed Systems

Elscint High Speed Vibratory Feeder for Steel Tubes

Elscint Automation, the ISO 9001:2000 certified leading vibratory parts feeder manufacturer from India recently manufactured a high speed bowl feeder for feeding of steel tubes of various sizes. There were a total of 7 tubes and in some cases the diameter was more than the length, some cases the diameter was less than the length (length being more) while in two cases, the diameter and length were...

Read More »
Materials Feeders

Bernard to Showcase New Flux-Cored Welding Products at 2008 CONEXPO-CON/AGG Show

o Gasless Centerfire components allow Q-Gun to be used for MIG or flux-cored o Heavy-Duty Centerfire consumables withstand high amperage MIG welding o Dura-Flux gun sets the standard in comfort and durability in flux-cored welding BEECHER, Ill. December 3, 2007- With a focus on toughness, comfort and durability, Bernard® will showcase the new Dura-Flux(TM) gun as well as the new heavy-duty...

Read More »
Feeders and Feed Systems

Meyer Industries Offers In Stock Vibratory Feeders

Meyer Industries is now offering In Stock Vibratory Feeders that are ready for shipment in 2-3 days. Meyer’s In Stock Vibratory Feeders feature precise start/stop controls for highly accurate feed rates of most dry, free-flowing products. Their highly sanitary design combined with rugged construction enables these machines to fit the most demanding applications. A wide range of trough...

Read More »
Volumetric Feeder has two moving parts.
Materials Feeders

Volumetric Feeder has two moving parts.

Designed to handle dry bulk materials, MetaTech Feeder is built with 2 moving parts - drive and screw - to optimize performance and minimize process downtime. O-ring sealed inline direct drive, Delrin® bushing, and agitator/conditioner screw help maintain consistent product density and completely fill feed screw for accurate (+1-1Â-½%) feeding. Interchangeable screw/tube combinations...

Read More »
K-Tron and Premier Exhibit Automation Equipment for Batch and Continuous Pharmaceutical Processes at AAPS 2007, November 11-15, San Diego Convention Center, San Diego, CA, Booth 3200
Parts Feeders

K-Tron and Premier Exhibit Automation Equipment for Batch and Continuous Pharmaceutical Processes at AAPS 2007, November 11-15, San Diego Convention Center, San Diego, CA, Booth 3200

PITMAN, NJ (October 11, 2007)- K-Tron will exhibit the latest feeding and conveying equipment for pharmaceutical processing applications at AAPS 2007, San Diego Convention Center, San Diego, CA, November 11-15, booth 3200. This show marks the first time that K-Tron and Premier exhibit at this event. Pharmaceutical process equipment on display include the MT12 Micro-ingredient Feeder, for low rate...

Read More »
Materials Feeders

Duplo USA Debuts Series of New Products at Graph Expo 2007

DUPLO USA DEBUTS A SERIES OF NEW PRODUCTS AND DEMONSTRATES A RANGE OF INNOVATIVE FINISHING AND DUPLICATING SOLUTIONS AT GRAPH EXPO 2007 Santa Ana, CA: September 9th 2007) Graph Expo 2007 is the platform for a series of key product debuts for Duplo USA, with the first showing of its DSF-5000 high speed Document Sheet Feeder, the DC-445 Creaser, the DB-280 Perfect Binder and the fully automatic...

Read More »
Materials Feeders

Duplo Previews New DSF-5000 High Speed Document Sheet Feeder at Graph Expo 2007

(Santa Ana, CA: September 9th 2007) Duplo USA is using Graph Expo 2007 to preview the DSF-5000, its new modular high speed sheet feeder and finishing solution that can support the printed output of multiple printers without impacting on print production output. An addition to the Duplo Document Sheet Feeder family and next-level option to the DSF-2000, the DSF-5000 is a higher speed, production...

Read More »
Manncorp Offers Free Feeders Worth up to $16,135 .....
Imaging Equipment

Manncorp Offers Free Feeders Worth up to $16,135 .....

A precedent-shattering series of pick and place systems' year-end sales incentives worth from nearly $7,700 to over $16,000 has been announced by Manncorp. The company is including as many as 30 8mm intelligent feeders - along with a 10-lane stick and waffle tray - all at no additional cost for those who commit by December 27, 2007. The machines involved in the offer are the three most popular...

Read More »
Materials Feeders

Evacuation System moves regrind material.

Designed to consistently flow material in steady stream at predictable rate of speed, SRS Evacuation System moves regrind material from granulator to storage area, dryer, or injection molding machine. Integrating evacuation system and bi-cutter granulator into one machine, system eliminates need for vacuum loader as well as bridging in granulator collection bins.

Read More »
Spool Gun lets MIG tools perform aluminum welding.
Materials Feeders

Spool Gun lets MIG tools perform aluminum welding.

Designed for those who perform occasional aluminum welding, Spoolmate 100 Series plugs directly into Millermatic® 140, Millermatic 140 with Auto-Set(TM), or Millermatic 180 MIG welder without requiring separate control box. Recessed contact tip and clear spool cover help reduce number of burnbacks, while dual V-knurled drive rolls ensure consistent feeding of aluminum. Unit comes with 12 ft...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics