New Feeders and Feed Systems Products

Wire Feeder features crush-proof case.

SuitCase 12VS(TM) voltage-sensing portable wire feeder operates on open-circuit arc voltage. It permits flux cored welding with constant current power sources and MIG and flux cored welding with constant voltage power sources. It holds wire spools up to 12 in. and runs .023 to 5/64 in. diameter wire at speeds of 50 to 700 ipm. Injection molded, flame-retardant case has tight seal that protects...

Feeder System eliminates tray replenishment time.

Portable TF20 Tray Feeder incorporates electronically controlled drive systems to enable feeder to safely handle thick or thin JEDEC or IEC trays. Automatic tray exchange is controlled by host machine is less than 5 sec. Trays are fed from stack to pick position and returned once devices have been programmed. Tray replenishment is achieved during machine's TAKT time.

Cartridge Feed Systems handle highly viscous materials.

DispensitÃ-® Titan 200 ACO(TM) and Titan 128 transfer abrasive and/or extremely viscous materials from cartridges to any dispense valve with material pressures up to 200 psi. Titan 200 uses 20 oz cartridges and requires only plant air pressure to produce 2.0:1 material pressure power factor. Titan 128 uses 1/10 gal caulking cartridges with threaded outlets. Both can be mounted close to point...

Chemical Feed Systems are custom built for CPI applications.

Built with metering pumps, tanks, portable mixers, and control panels, feed systems are fully piped, wired and tested. Piping is available in all materials, threaded or welded. Systems are packaged with tanks on board and include space for semi-bulk containers or totes. Users also have option to use external bulk containers or totes. Feed systems can be configured for feed rates from 0.02 through...

FRP Advantages for Utility Infrastructure

Our eBook, FRP Advantages for Utility Infrastructure, outlines the advantages and applications of FRP for utility structures.

Wire Feeding Guns minimize friction in line.

Push-pull wire feeding guns handle steel and aluminum wire from .030 to 1/16 in. CobraMax fixed gooseneck is rated 150 A at 100% duty cycle. It features flip-up drive roll cover and quick wire-release lever. Standard Python torch is air cooled and rated at 200 A at 100% duty cycle. Replaceable gooseneck can be interchanged with full water-cooled barrel and gas cup combination, to achieve rating...

Wire Feeder is both rugged and portable.

LN-15, with impact- and abrasion-resistant, ABS plastic case, is surrounded by full metal roll cage, made from aluminum alloy tubing. Across the Arc model has built-in contactor. Control Cable model is capable of Surface Tension Transfer-® welding. LN-15 is designed for MIG and flux-cored processes using .023 to 1/16 in. solid wire or .035 to 5/54 in. flux-cored wire, at feed speeds of 50-700...

Chemical Feed Systems suit wide range of applications.

Custom systems can be designed to include any metering pumps, tanks, portable mixers and control panels, along with instruments and piping specialties. Units are fully piped, wired, and tested. Piping is available in all materials, threaded or welded. Systems are packaged with tanks on board and include space for semi-bulk containers or totes. They offer feed rates from 0.02 to 300 gph at...

Loose Pouch Feeder provides accurate inserting and counting.

Model OT handles loose bulk quantities of filled pouches of product, both counting and inserting pouches into containers at same time. It accommodates filled pouches in sizes from 1/4 x 1/2 in. to 4 x 6 in. Unit can be customized to feed from 1 to 20 lanes, with per lane feed rate up to 150/min. Model OT can be attached to cartoners, baggers, bucket conveyors, and tray thermoformers.

Modular Infeed System places labels with accuracy to .005 in.

Modular Infeed System can be added at infeed of existing folder gluers to feed, transport, and position carton blanks. It offers exact placement with infinitely variable pitch. Elimination of top carrier belts creates open design to scan entire blanks for bar codes, windows, or print defects. System includes computer sequenced carton feed (independent of belt speed), live side guide, and cammed...

Vibratory Feeders suit lightweight powders and leafy products.

HD Series High Deflection Vibratory Feeders combine high deflection (3/16 in.) and low frequency (30 cps) with precise control of electromagnetic vibratory feeder. Available in 5 models and 16 sizes, feed rates up to 80 ft/min are possible for products with bulk densities less than 10 lb/ftÃ-³. Feeders include variable speed control housed in M Type (NEMA 12) enclosure, AC electromagnetic...

Micro Air's Dust, Fume, Mist Collection Equipment Facilitate a Safe Work Environment

Dust, fume, and mist collectors from Micro Air promote a safer, more productive work environment. Our wide array of products are available to the industrial manufacturing sector for processes such as welding, cutting, grinding, blasting, and more. Check out our video to learn more.