Feeder System eliminates tray replenishment time.
Portable TF20 Tray Feeder incorporates electronically controlled drive systems to enable feeder to safely handle thick or thin JEDEC or IEC trays. Automatic tray exchange is controlled by host machine is less than 5 sec. Trays are fed from stack to pick position and returned once devices have been programmed. Tray replenishment is achieved during machine's TAKT time.
Read More »
Cartridge Feed Systems handle highly viscous materials.
Dispensit-® Titan 200 ACO(TM) and Titan 128 transfer abrasive and/or extremely viscous materials from cartridges to any dispense valve with material pressures up to 200 psi. Titan 200 uses 20 oz cartridges and requires only plant air pressure to produce 2.0:1 material pressure power factor. Titan 128 uses 1/10 gal caulking cartridges with threaded outlets. Both can be mounted close to point of...
Read More »
Cartridge Feed Systems handle highly viscous materials.
DispensitÃ-® Titan 200 ACO(TM) and Titan 128 transfer abrasive and/or extremely viscous materials from cartridges to any dispense valve with material pressures up to 200 psi. Titan 200 uses 20 oz cartridges and requires only plant air pressure to produce 2.0:1 material pressure power factor. Titan 128 uses 1/10 gal caulking cartridges with threaded outlets. Both can be mounted close to point...
Read More »
Chemical Feed Systems are custom built for CPI applications.
Built with metering pumps, tanks, portable mixers, and control panels, feed systems are fully piped, wired and tested. Piping is available in all materials, threaded or welded. Systems are packaged with tanks on board and include space for semi-bulk containers or totes. Users also have option to use external bulk containers or totes. Feed systems can be configured for feed rates from 0.02 through...
Read More »
Guide to Fatigue Testing
Learn what fatigue testing is and how fatigue testing service providers can determine the longevity of a part or product.
Read More »
Chemical Feed Systems are custom built for CPI applications.
Built with metering pumps, tanks, portable mixers, and control panels, feed systems are fully piped, wired and tested. Piping is available in all materials, threaded or welded. Systems are packaged with tanks on board and include space for semi-bulk containers or totes. Users also have option to use external bulk containers or totes. Feed systems can be configured for feed rates from 0.02 through...
Read More »
Wire Feeding Guns minimize friction in line.
Push-pull wire feeding guns handle steel and aluminum wire from .030 to 1/16 in. CobraMax fixed gooseneck is rated 150 A at 100% duty cycle. It features flip-up drive roll cover and quick wire-release lever. Standard Python torch is air cooled and rated at 200 A at 100% duty cycle. Replaceable gooseneck can be interchanged with full water-cooled barrel and gas cup combination, to achieve rating...
Read More »
Wire Feeder is both rugged and portable.
LN-15, with impact- and abrasion-resistant, ABS plastic case, is surrounded by full metal roll cage, made from aluminum alloy tubing. Across the Arc model has built-in contactor. Control Cable model is capable of Surface Tension Transfer-® welding. LN-15 is designed for MIG and flux-cored processes using .023 to 1/16 in. solid wire or .035 to 5/54 in. flux-cored wire, at feed speeds of 50-700...
Read More »
Wire Feeding Guns minimize friction in line.
Push-pull wire feeding guns handle steel and aluminum wire from .030 to 1/16 in. CobraMax fixed gooseneck is rated 150 A at 100% duty cycle. It features flip-up drive roll cover and quick wire-release lever. Standard Python torch is air cooled and rated at 200 A at 100% duty cycle. Replaceable gooseneck can be interchanged with full water-cooled barrel and gas cup combination, to achieve rating...
Read More »
Wire Feeder is both rugged and portable.
LN-15, with impact- and abrasion-resistant, ABS plastic case, is surrounded by full metal roll cage, made from aluminum alloy tubing. Across the Arc model has built-in contactor. Control Cable model is capable of Surface Tension Transfer-® welding. LN-15 is designed for MIG and flux-cored processes using .023 to 1/16 in. solid wire or .035 to 5/54 in. flux-cored wire, at feed speeds of 50-700...
Read More »
Chemical Feed Systems suit wide range of applications.
Custom systems can be designed to include any metering pumps, tanks, portable mixers and control panels, along with instruments and piping specialties. Units are fully piped, wired, and tested. Piping is available in all materials, threaded or welded. Systems are packaged with tanks on board and include space for semi-bulk containers or totes. They offer feed rates from 0.02 to 300 gph at...
Read More »
Material Handling Solutions from Global Leader in Rubber & Urethane Power Transmission
Megadyne's QST polyurethane timing belts take up less space and guarantee a lower noise level than chain and other traditional material handling belts. Check out our video to learn more.
Read More »
