Fasteners

Fasteners

Fasteners have temporary locating patch.

NYSTAY® Fasteners provide temporary locating patch that holds fasteners in place during transport and on automated production lines. Polymer can be applied to both threaded and unthreaded fasteners, allowing manufacturers to temporarily secure placement of components during interim period prior to final assembly. NYSTAY fasteners can replace previous method of using plastic washers to hold...

Read More »
Fastening Systems

Fastening System maintains clamp load under vibration.

Able to prevent loss of clamp load in applications where vibration is present, TineLok(TM) has bolt design engineered with longitudinal channels along thread. Nut incorporates 3 tines that engage bolt thread and prevent rotation of nut and loosening caused by vibration. Ensuring secure joint and maintenance of clamp load, fastener provides positive vibration resistance and requires no special...

Read More »
Releasable Wire Saddle has locking top.
Miscellaneous Straps

Releasable Wire Saddle has locking top.

Designed to meet requirements for products that can be easily removed as well as requirements of European WEEE Initiative, WSLTRA saddle is mounted with arrowhead design that is removed from above board. Locking top is releasable for repair, replacement, or addition of wire or cable. Made of RoHS Compliant Nylon 6/6 material, wire saddle is also available in flame-retardant UL94 V0 material.

Read More »
Seismic Fixture Clamps secure luminaires to T-bar.
Fasteners

Seismic Fixture Clamps secure luminaires to T-bar.

CADDY® SFCLT Clamps attach fixtures securely to ceiling frame member, and prevent T-bar from twisting and disconnecting at T-Bar intersections in seismic event. Reusable clamps also prevent fixture from separating from T-Bar framework and can withstand force of standard fire hose. Clamps consist of connectors for 2 x 4 ft and 2 x 2 ft light fixtures, as well as end-to-end and side-by-side...

Read More »
Conveyor Belt Fasteners target high-impact applications.
Miscellaneous Fasteners

Conveyor Belt Fasteners target high-impact applications.

Flexco® R9S Scalloped Edge(TM) Fasteners feature 8-rivet attachment for high-tension belts with mechanical fastener ratings up to 2,000 PIW. Stamped from 0.135 in. 300 series stainless steel, units accommodate belt thicknesses from 15/32-1 in. running on conveyors with minimum end-pulley diameter of 42 in. Fasteners grip belt end between top and bottom plates, are 1Â-½ in. wide and...

Read More »
Inserts suit high-load attachment applications.
Threaded Fastener Inserts

Inserts suit high-load attachment applications.

Atlas(TM) MaxTite® blind threaded inserts provide permanent metal threads in blind attachment applications, where only one side of workpiece is accessible for fastener installation and final component assembly. Inserts can be used in panels as think as .020 in. Available in flathead and countersunk types, units offer thread sizes from No. 4-40 through Â-½ in.-13 and M3 through M12. Rib...

Read More »
Taper-Threaded Splices connect 2 pieces of rebar.
Miscellaneous Fasteners

Taper-Threaded Splices connect 2 pieces of rebar.

Available in sizes 10-57 mm, LENTON® Splices are designed for worldwide grades of rebar and meet ACI-318, BS 8110, and DIN 1045 full-tension splice requirements. Taper-threaded range consists of standard and transition couplers, as well as positional couplers to join bars of any shape, size, and diameter. Weldable and bolt couplers are also available for joining structural steel to...

Read More »
Fasteners nail cable tie mounts to metal.
Fasteners

Fasteners nail cable tie mounts to metal.

Made of impact-resistant plastic with pre-inserted, hardened-steel Metal-Tack, Tack-Mounts(TM) are intended for permanent fastening of cable tie mounts without drilling. To fasten, installer places Tack-Mount on tip of air tool, positions it, and impacts fastener and mount directly into steel, aluminum, or cast iron. Measuring .860 x .375 in., Tack-Mounts are permanently secured to metal but are...

Read More »
Rivet Conveyor Belt Fasteners suit high-tension systems.
Miscellaneous Fasteners

Rivet Conveyor Belt Fasteners suit high-tension systems.

Developed for heavily loaded mainline and panel belts in underground and surface mining, Flexco® R9S fasteners are stamped from 0.135 in. thick 300 Series stainless steel and accommodate belt thickness from 5/8-1 in. Fasteners, part of SR(TM) Scalloped-Edge(TM) rivet-hinged conveyor belt fastener system, feature 8-rivet attachment and suit belts with mechanical fastener ratings up to 2,000 PIW...

Read More »
Mechanical Panel Fastener works without screws or tools.
Fasteners

Mechanical Panel Fastener works without screws or tools.

Utilizing DÂ-·SNAP technology, SNAP-JOINER can be snapped into place on metal panels by hand. Requiring rectangular opening for installation, D·SNAP housing holds spring-loaded set of wings that snap into position to hold firmly in panel, even in severe vibration environments. Product can be used wherever 2 sheet metal panels need to be joined. It can also be used in place of captive...

Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Sponsored

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers