PEM® Self-Clinching Nuts and Studs for Use in High-Strength Thin Steel Sheets Provide Permanent Threads for Automotive Component Attachment Applications
Studs

PEM® Self-Clinching Nuts and Studs for Use in High-Strength Thin Steel Sheets Provide Permanent Threads for Automotive Component Attachment Applications

PEM® self-clinching SH™ nuts and HFLH™ studs from PennEngineering® can successfully install in high-strength thin steel sheets to provide permanent threads for mating hardware in automotive component attachment applications. These hard panel nuts and studs manufactured from hardened alloy steel ultimately exhibit stronger thread strength compared with conventional fasteners. The fasteners...

Read More »
PEM-® Self-Clinching Nuts and Studs for Use in High-Strength Thin Steel Sheets Provide Permanent Threads for Automotive Component Attachment Applications
Studs

PEM-® Self-Clinching Nuts and Studs for Use in High-Strength Thin Steel Sheets Provide Permanent Threads for Automotive Component Attachment Applications

PEM® self-clinching SH™ nuts and HFLH™ studs from PennEngineering® can successfully install in high-strength thin steel sheets to provide permanent threads for mating hardware in automotive component attachment applications. These hard panel nuts and studs manufactured from hardened alloy steel ultimately exhibit stronger thread strength compared with conventional fasteners. The fasteners...

Read More »
PEM® FHL™ and FHLS™ Self-Clinching Flush-Head Studs for Thin Metal Sheets Feature Low-Displacement Head Design Enabling Close-to-Edge Installation
Blind Studs

PEM® FHL™ and FHLS™ Self-Clinching Flush-Head Studs for Thin Metal Sheets Feature Low-Displacement Head Design Enabling Close-to-Edge Installation

PEM® FHL™ and FHLS™ self-clinching flush-head studs from PennEngineering® feature a unique low-displacement head design enabling close-to-edge installation of the fasteners in thin metal sheets. The studs provide ideal attachment solutions compared with weld studs and other conventional hardware by promoting easier and cleaner installation with fewer production steps and more reliable...

Read More »
PEM-® FHL™ and FHLS™ Self-Clinching Flush-Head Studs for Thin Metal Sheets Feature Low-Displacement Head Design Enabling Close-to-Edge Installation
Blind Studs

PEM-® FHL™ and FHLS™ Self-Clinching Flush-Head Studs for Thin Metal Sheets Feature Low-Displacement Head Design Enabling Close-to-Edge Installation

PEM® FHL™ and FHLS™ self-clinching flush-head studs from PennEngineering® feature a unique low-displacement head design enabling close-to-edge installation of the fasteners in thin metal sheets. The studs provide ideal attachment solutions compared with weld studs and other conventional hardware by promoting easier and cleaner installation with fewer production steps and more reliable...

Read More »
PEM® Concealed-Head Self-Clinching Studs and Standoffs for Thin Metals Provide Permanent Mating Threads and Promote Smooth and Unmarred Designs
Studs

PEM® Concealed-Head Self-Clinching Studs and Standoffs for Thin Metals Provide Permanent Mating Threads and Promote Smooth and Unmarred Designs

PEM® concealed-head self-clinching studs and standoffs from PennEngineering® install permanently in thin metal assemblies to provide strong and reusable threads for mating hardware while preserving a smooth and unmarred appearance on the side of the sheet opposite installation. The concealed-head feature additionally will satisfy strict ingress protection requirements in assemblies where a...

Read More »
PEM-® Concealed-Head Self-Clinching Studs and Standoffs for Thin Metals Provide Permanent Mating Threads and Promote Smooth and Unmarred Designs
Studs

PEM-® Concealed-Head Self-Clinching Studs and Standoffs for Thin Metals Provide Permanent Mating Threads and Promote Smooth and Unmarred Designs

PEM® concealed-head self-clinching studs and standoffs from PennEngineering® install permanently in thin metal assemblies to provide strong and reusable threads for mating hardware while preserving a smooth and unmarred appearance on the side of the sheet opposite installation. The concealed-head feature additionally will satisfy strict ingress protection requirements in assemblies where a...

Read More »
Wall Studs

ClarkDietrich Receives Los Angeles Research Report for its ProSTUD Drywall Framing System

West Chester, Ohio- – The City of Los Angeles Department of Building and Safety has certified, in report LA RR 26019, that ClarkDietrich’s ProSTUD® Drywall Framing System (ProSTUD® and ProTRAK®) are code compliant building products and are approved for use in construction in the City of Los Angeles. The LA RR requires exceedingly difficult third-party evaluation, against a very...

Read More »
Wall Studs

ClarkDietrich Receives Los Angeles Research Report for its ProSTUD Drywall Framing System

West Chester, OhioÂ- – The City of Los Angeles Department of Building and Safety has certified, in report LA RR 26019, that ClarkDietrich’s ProSTUD® Drywall Framing System (ProSTUD® and ProTRAK®) are code compliant building products and are approved for use in construction in the City of Los Angeles. The LA RR requires exceedingly difficult third-party evaluation,...

Read More »
Flush-Head Studs offer quick mating with plastic fasteners.
Blind Studs

Flush-Head Studs offer quick mating with plastic fasteners.

Integrating X-Press™ threads, PEM Type FHX™ Studs enable quick mating with push-on plastic nuts, wire tie products, or other plastic fasteners in thin metal assemblies. Self-clinching units install permanently in metal sheets as thin as 1 mm and press into place using any standard press. Available with 5 mm and 6 mm threads in lengths from 10–25 mm, studs are- made from hardened carbon...

Read More »
Flush-Head Studs offer quick mating with plastic fasteners.
Blind Studs

Flush-Head Studs offer quick mating with plastic fasteners.

Integrating X-Press™ threads, PEM Type FHX™ Studs enable quick mating with push-on plastic nuts, wire tie products, or other plastic fasteners in thin metal assemblies. Self-clinching units install permanently in metal sheets as thin as 1 mm and press into place using any standard press. Available with 5 mm and 6 mm threads in lengths from 10–25 mm, studs are- made from hardened carbon...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics