New Fasteners & Hardware Products

Captive Screws suit aerospace industry.

With grooved design, Magic Groove(TM) screws enable rigid retainer rings to be slipped onto bolt without bending, breaking, or distorting. Manually inserting retainer ring onto bolt shaft eliminates need to force ring up and over end of bolt. With retainer ring in place, bolt end is flared with standard flaring tool. Fully retractable, structural fasteners can be custom made to specified lengths,...

Magnetic Mat organizes tools and fasteners.

Flexible, non-conductive, PVC MagnaMatPro(TM) measures 12 in. sq x 3/16 in. thick. Neodymium iron-boron magnets hold up to 20 lb of metal tools, fasteners, and other ferrous objects. Mat also serves as magnetic sweep to retrieve objects such as nails, nuts, bolts, and washers that fall onto ground or out of reach. MagnaMatPro adheres to any iron or steel surface, flat or curved, coated or...

Socket/Ratchet Sets deliver SuperTorque-® fastening power.

With low profile design, socket and ratchet sets engage fastener flats for higher torque application. Configurations include: 14-piece, Ã-¼ in. drive set; 12-piece, 3/8 in. drive set; 21-piece, 3/8 in. drive set; 12-piece, Ã-½ in. drive set; and 17-piece, Ã-½ in. drive set. Detents on all socket inner walls ensure tight, positive engagement with drive tool in any orientation. Ratchets...

Laser Alignment Systems offer live data output.

Series L-740 Ultra-Precision Systems are machine tool grade, while Series L-730 Precision Systems are suitable for fabrication. With ability to use multi-targets simultaneously, lasers can collect complete geometric data on most machining centers in 90 min. Series L-740 lasers offer flatness capability of 0.00001 in./ft and 200 ft operational range. Series L-730 lasers have continuously sweeping...

Metal Finishing Selection Guide

This unique chart compares different metal finishes by cost, corrosion resistance, applications and more.

Pull Pins incorporate plastic handles.

Spring-loaded pull pins, with ball or T-handles, allow users to quickly retract and engage plunger for locating, fastening, and quick-change operations. Housing, made of 12L15 steel for welding to fixture, accepts fully retracted plunger. Pins are available with plunger diameters from 1/4-5/8 in. Plungers, made from 1038 steel, have tensile strength of 90-95 ksi on all sizes except 5/8 in., which...

Snap Rivets suit electronic applications.

Snap Rivets are 2-piece fasteners molded in high dielectric Nylon 6/6 that can be installed without tools. They are available for 6.4 mm diameter hole, and covering panel thickness from 1.8-9.9 mm. Rivet is placed in hole and smooth, oversized head is pressed. Legs expand and firmly lock components permanently in place.

Protective Caps suit phamaceutical processing applications.

Closure Caps, for minifast products, protect unused ports on junction boxes or cordsets. Available in nickel-plated brass or stainless steel, 7/8-16UN threaded closure caps are offered with or without lanyard for male and female applications. Made of nylon-coated stainless steel cable, lanyard does not provide place for unwanted debris to collect and is finished with eye for receptacle...

Monitor/Controller is suited for remote site cabinets.

Rack or door mountable TELSECÃ-® 800 performs environmental monitoring, intrusion alarming and door access control, power plant, battery, and telephony equipment monitoring in remote site cabinets. Built-in battery monitoring algorithm predicts batteries capacity and time remaining until low voltage disconnect during power failures. Use of modem, 2-way RS232, or TCP/IP Ethernet connection...

Terminals suit military and nuclear industries.

SMALL HYDENTÃ-® small terminal product line offers ring and fork tongue terminals, flag style and standard quick disconnects, and splices. Product offering also includes installation tools. Customized solutions are available to fit unique customer needs. Most connectors are UL and CSA listed and are available in vinyl, nylon, and polyvinylidene (PVF2) insulated and non-insulated versions....

Deck Screws allow fast installation of composite decking.

Collated Composite Deck Screws use dual-thread design, which eliminates mushrooming of composite deck during installation. Five-sided thread displaces less deck material and reduces driving torque by over 23% versus comparable screws. Stainless-steel screws resist corrosion and rust, and come in #10 x 2 in. and #10 x 3 in. sizes. They eliminate pre-drilling in most applications and install with...

Clear Clogged Drains Faster with General Pipe Cleaners' Kinetic Water Ram

The Kinetic Water Ram by General Pipe Cleaners clears out clogged pipes quickly using kinetic energy. The Ram is so simple to operate, anyone can use it. Check out the video to learn more.