Fasteners & Hardware

Fasteners & Hardware

High Strength Washers provide 360-degree impervious seal.

Feb 26, 2015

Available in 4-40, 5/8, ¾, 7/8, and 1 in. sizes, BarTite High Strength Sealing Washers seal out moisture, vapors, liquids, chemicals, pressurized air, and other contaminants. Units employ stable, non-aging plastisol sealant that is resistant to wide range of liquids. Impervious 360° seal is achieved by applying torque, which sends plastisol sealant flowing out in every direction and down... Read More

Adhesives & Sealants, Fasteners & Hardware

Machinists Inc. Steps in to Provide Needed Fix for City of Seattle

Feb 25, 2015

Machinists Inc. had an opportunity to work on a special project in West Seattle with Seattle Public Utilities (SPU), where the aging, 1930s era water system, was giving the city of Seattle some problems. A pressure valve there has been leaking water into a reservoir for a number of years. Because of erosion, it had created a non-sealing surface, so it wouldn't seal tight. It meant the city of... Read More

Fasteners & Hardware, Mechanical Components and Assemblies

100 Year-Old Ballard Locks gets Upgrade to Keep Operating

Feb 23, 2015

For 100 years the Hiram M. Chittenden Lock's trunnions, gears and gates maintained the levels of Lake Washington's and Lake Union's waters. Obviously, these parts performed well for more than 100 years of nearly constant use, but as you might imagine, the Ballard Locks, as they're locally known, were due for an upgrade. For this project, Redside Construction partnered with... Read More

Fasteners & Hardware, Machinery & Machining Tools, Material Handling & Storage

REGO-FIX® Spotlights Advanced Toolholding Mix and More at Northwest Machine Tool Expo 2015

Feb 20, 2015

INDIANAPOLIS, Ind. – At the Northwest Machine Tool Expo 2015 in AI Marketing’s booth 615, REGO-FIX® will highlight several precision tooling products. The company will show a new innovation for effective tool locking and a one-of-a-kind retrofit coolant-through system for live tooling. Also on display will be a toolholding system that enables quick and uncomplicated tool changing, and a... Read More

Fasteners & Hardware, Material Handling & Storage

Hang Large Banners or Multiple Signs with a Single Ceiling Clip

Feb 19, 2015

Hang large banners or multiple signs with a single ceiling clip, using FFR's new Sure-Twist® Banner Bar. The Sure-Twist® Banner Bar features three holes to hang one banner or several signs at one time.  One easy-lift motion hangs banners evenly, simplifying sign installation. The Bar secures to standard 1" ceiling grid with FFR's patented twist and lock design, and is compatible... Read More

Fasteners & Hardware

Stainless Steel Coiled Spring Pins work in corrosive environments.

Feb 17, 2015

Offered in metric sizes with Ø2–Ø6 mm diameters and 8–50 mm lengths, 316 stainless steel Coiled Spring Pins feature 2¼-coil cross-section and compress when installed into host component. These self-retaining pins exhibit uniform strength and flexibility after insertion. To prevent hole damage and prolong assembly life, shock absorbing design dampens forces and vibration. Type... Read More

Fasteners & Hardware

Polyester Cord Strapping suits building trade applications.

Feb 16, 2015

Manufactured from polyester fibers, polyester cord strapping is available in bonded and woven forms as well as in regular- and heavy-duty versions. This non-metallic strapping material, applied using hand tensioner and heavy-duty wire buckle, comes in standard size and specialty products. While P40T medium-duty strap is used in marine and agricultural industry, 65W-HD and 125WX-HD can be... Read More

Fasteners & Hardware

Now Offering Metric Oil Impregnated Bronze Bushings Online

Feb 12, 2015

Roseville, MI – National Bronze Mfg. Co. is proud to announce the addition of a full line of metric sized oil impregnated bronze bushings available for sale online at their ecommerce site bronzebushings.com.  The metric sized sleeve bushings comply with the SAE 841 standards for an oil impregnated sintered bronze bushing.  The addition of this... Read More

Fasteners & Hardware, Labels Tags Signage & Equipment, Material Handling & Storage, Non-Industrial Products

EZ-Hang Banner Hangers for Ceiling Signage

Feb 04, 2015

Communicating at retail to customers comes in many shapes and sizes. You will see signage of all types rising from the floor, extending from the walls, hanging from shelving and displays, on top of counters, and of course, suspended from the ceiling. Clip Strip Corp., a pioneer in the retail store fixtures sector, has budget friendly solutions to many retailer needs, including EZ-Hang Banner... Read More

Controls & Controllers, Fasteners & Hardware, Green & Clean, Material Handling & Storage, Materials & Material Processing, Mechanical Power Transmission, Sensors Monitors & Transducers, Thermal & Heating Equipment

Davis-Standard's Global Advantage(TM) in Customer Service at NPE

Feb 02, 2015

Supporting customers after the sale is a priority for Davis-Standard, LLC and this will be evident at the company’s NPE booth. Davis-Standard’s aftermarket department will exhibit multiple feedscrew designs, fast delivery spare parts, a rebuilt Thermatic® extruder and a variety of extrusion control systems and upgrades. Feedscrew Services – Davis-Standard replacement or rebuilt... Read More

Fasteners & Hardware

CM Latch Kits for Hoist and Rigging Hooks Now Available in Easy-to-Order Bulk Packaging

Jan 29, 2015

AMHERST, N.Y. – Columbus McKinnon, a leading designer, manufacturer and marketer of material handling products, is now offering 35 of its most popular latch kits for hoist and rigging hooks in economical, easy-to-order bulk packaging. Hoist Latch Kits and Rigging Latch Kits will be available in bulk packages of 50 and 100 units and will feature smart part numbers, making them easy to order.... Read More

Fasteners & Hardware

Captive Panel Screws feature self-clinching design.

Jan 29, 2015

Offering alternative to spring-loaded versions, PEM® Type PFHV™ Screws are no-spring steel fasteners integrating captive screw to eliminate potential risk for damage to internal components associated with unsecured hardware. Screws are engineered for use with aluminum or steel sheets as thin as .036 in. and exhibiting hardness of HRB 60 or less on Rockwell B Scale or HB 107 or less on... Read More

Fasteners & Hardware

Stainless Steel Hand Knobs come in inch and metric sizes.

Jan 28, 2015

Made of cast stainless steel, American Standard No. CF-8, with matte, shot-blast finish, DIN 6336-NI Hand Knobs are available blank, with threaded blind bores, or with tapped through bores. Inch size threads range from 1/4-20 to 1/2-13, while with metric threads range from M6 x 1.0 to M12 x 1.75. Special inch or metric bores, threads, and drilled and pinned threaded studs are available upon... Read More

Fasteners & Hardware

Application Spotlight: Welker Expanding Locating Pin

Jan 28, 2015

When presented with an application challenge from a major Midwest agricultural manufacturer, Welker went right to work to create a solution.  The problem: how to accurately and repeatably locate critical parts using gage holes having a +/- 0.25mm tolerance.  The solution: an expanding locating pin.  The Welker expanding pin has fingers that are located below the surface of the pin. When... Read More

Fasteners & Hardware, Material Handling & Storage

Indexable Insert Cartridges enhance face milling operations.

Jan 26, 2015

Offered in 2 geometries, FR751M and FR752M make performance of tangential indexable inserts available for adjustable face milling. Walter BLAXX shoulder mill, which produces precise, near step-free 90° shoulders, is available for tool diameters up to 6.30 in. When F2010 face mill is equipped with FR751M or FR752M cartridge, this technology can be applied up to diameters of 12.40 in.... Read More

Fasteners & Hardware, Machinery & Machining Tools

Micro-Sized Lead Screws can be customized to application.

Jan 26, 2015

Available through Haydon Kerk Express web store, Kerk® Micro Series is suitable for applications that require precise motion control in compact package. Custom screw materials, such as heat-treated 400 series stainless steel, are available, while custom nut materials, including PEEK and PPS, can be used to meet specific requirements. Applications include surgical and medical instruments,... Read More

Display & Presentation Equipment, Fasteners & Hardware, Machinery & Machining Tools, Material Handling & Storage

Count On Tools Inc. to Introduce New StripFeeder Mini at the IPC APEX EXPO

Jan 21, 2015

GAINESVILLE, GA - Count On Tools Inc. (COT), a leading provider of precision components and SMT spare parts, will exhibit in Booth #3625 at the IPC APEX EXPO, scheduled to take place Feb. 24-26, 2015 at the San Diego Convention Center in California. COT will debut the new StripFeeder Mini that features the same award-winning design of the StripFeeder in a smaller package (134mm x 152mm). The... Read More

Electrical Equipment & Systems, Fasteners & Hardware

Cable Bushing maximizes wire density.

Jan 20, 2015

With SKINTOP CUBE MULTI, up to 23 electrical cables or pneumatic lines can pass directly through enclosure wall. System places rigid, glass-reinforced nylon frame into standard-sized cutout in wall. Polycarbonate insert inside rectangular frame has gel-filled holes, which allow cables to be inserted while creating seal and providing strain relief. Available in 2 versions, CUBE MULTI  covers... Read More

Fasteners & Hardware

PCB Magazine Rack Stop Clip accelerates identification.

Jan 14, 2015

Installed on PCB magazine rack, single- and double-lane ezCLIP lets electronics manufacturers who manually load/unload racks distinguish required spacing between boards and prevent damage on boards with taller components. Design fosters accelerated identification of card guides that should be skipped as they prevent boards from being inserted. This hastens setup times for production runs as... Read More

Fasteners & Hardware

Coil Hard Hat Lanyards come with buckle or clamp.

Jan 12, 2015

By securing hard hat to worker, Squids® 3157 and 3158 prevent hard hat from falling at heights. Coil design minimizes lanyard length, preventing snag and tangle hazards while keeping lanyard away from worker's face. Squids 3158 utilizes easy release clamp that securely attaches to just about anything, while Squids 3157 houses double lock plastic buckle designed to connect to fall... Read More