Fasteners & Hardware

Electrical Clips handle up to 50 amps.
Clips

Electrical Clips handle up to 50 amps.

Alligator Clip Line can be used with testing equipment, battery connections, voltmeters and static control devices. Copper clips and corrosion-resistant, chrome-plated steel clips, with red or black insulation, range from small 5 A clip to 50 A battery clip. Applications include banana plug connections and crimping and soldering wires.

Read More »
T-Bar Knob provides low profile clamping.
Knobs

T-Bar Knob provides low profile clamping.

Metric-size T-Bar knob, made from matte-black thermoplastic, has brass, molded-in insert. Wide surface area allows for positive low profile clamping. Knob has maximum heat tolerance of 230°F and is resistant to solvents, oils, grease, and other chemical agents.

Read More »
Holding Assemblies are used in metal product manufacturing.
Magnets

Holding Assemblies are used in metal product manufacturing.

Permanent Magnetic Holding Assemblies are designed for positioning, stabilizing, holding, and feeding materials, parts, and scrap. Various standard configurations and sizes are available with insulated Ceramic, Alnico, and Rare Earth Magnets. Assemblies for watertight and high-temperature applications are also available.

Read More »
Boron Rings are oriented radially.
Neodymium

Boron Rings are oriented radially.

Made of sintered neodymium iron, single-piece Boron rings have radially oriented magnetic field. Because ring is single piece, and all grinding processes can be done prior to magnetizing and assembly. Polarization is single pole on outside with opposite pole on inside of ring, or alternating configuration with multiple poles on OD or ID. Parts can be magnetized in assembled state, or externally....

Read More »
Locking Pins are used where quick release is needed.
Pins

Locking Pins are used where quick release is needed.

Kwik-Lok pins are available in five handle styles: T, L, button, recessed button and ring. When buttons are depressed, balls at end of grip shaft retract, permitting insertion or removal. Standard sizes range from 3/16 to 1 in. OD in 1/2 to 6 in. grip lengths. Metric sizes are available from 5-25mm OD in 10-100mm grip lengths. All are made of 17-4 PH stainless steel or carbon steel.

Read More »
Tube Gripper snaps into 1/4 in. hole.
Cable Clamps

Tube Gripper snaps into 1/4 in. hole.

Model OFTGSP-1-05-19 Saddle-Pronged Optical Fiber Tube Gripper snaps into 0.093 in. thick panel. Ridges inside holding portion of clip match up to grooves on optical fiber bend limiting tubing, providing strain relief protection and prohibiting tubing from being pulled out of clip. Low profile allows air flow over board, and small footprint takes little space on board.

Read More »
Standoff Saddle protects wires from abrasion.
Clips

Standoff Saddle protects wires from abrasion.

Made of nylon 66 V2 or VO, SMWS is suitable for routing wires or optical fiber. It is available in 2 different sizes to accommodate 2 different panel thicknesses. Wires can be inserted into top side of saddle to protect them from abrasion. Micro version is ideal for low profile applications and takes up very little real estate. Standoff allows users to space wires or fibers above board's...

Read More »
Saddle accommodates wire bundles.
Clips

Saddle accommodates wire bundles.

Model MBHWSSE is available in 2 different sizes to accommodate 2 different wire bundle ranges. Wires can easily be inserted into side of saddle to protect from abrasion. Mounting method is suitable for locking into round, threaded, punched, drilled or blind holes in wood, metal and particle board and more. Micro size is ideal for low profile applications and takes up very little real estate.

Read More »
Locking Key Slot attaches standoffs and fasteners to PCB.
Studs

Locking Key Slot attaches standoffs and fasteners to PCB.

LKS can be used in place of pressed in metal screw insert to attach fasteners to circuit boards and panels. It is easily installed and removed by hand from same side of panel. It has low insertion force yet pullout force exceeds strength of most standard PC boards. Slot is made of Nylon 6/6 to fit panels and circuit boards 0.062 in. thick. LKS holds standoffs, wire ties, wire routing clips and...

Read More »
Clip is designed to route cables in corners.
Clips

Clip is designed to route cables in corners.

Kwik Corner Klip KKK-4-RT makes 90 deg angle between back and base of clip, making it suitable for routing cables into corners. Clip is extruded from PVC material and can be mounted with acrylic double backed adhesive tape provided on base. It can be provided in any specified length.

Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Sponsored

Gorbel Introduces New Mobile Fall Protection Unit

Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers