Fasteners & Hardware

Snap-In Standoffs reduce assembly time and cost.

Snap-In Standoffs reduce assembly time and cost.

Steel-Lock(TM) standoffs simply snap into place, requiring no tools, screws, nuts, or washers. Boards lock securely into place and may be easily removed for replacement or repair. Molded-plastic bodies are made from flame-retardant ABS. Snap-in tips are made from heat-treated, stainless steel. Standoffs, for use with boards and panels with thickness from 0.045 to 0.078 in., come in lengths from...

Read More »
Trigger Latches suit low-profile applications.

Trigger Latches suit low-profile applications.

No. 634/637 Series consists of adjustable compression latches that are activated by push-button. Grip range is from .13 to 2.25 in. Key-locking and non-key-locking versions are available in black or chrome finishes. All feature die cast components and have universal mounting hole.

Read More »

Shackles offer various sizes and capacities.

Long reach carbon steel shackles are available in two body sizes, 3/4 in. body with 7/8 in. pin rated at working load limit of 10,000 lbs and 1 in. body with 1 in. pin rated at 19,000 lbs. Web sling shackles are used on web slings from 2 to 6 in. wide. They come in three body sizes with working load limits from 14,500 to 22,500 lbs and design factor of 6:1. Web sling shackles pass fatigue...

Read More »
Ejector Pins reduce friction without nicking and flaking.

Ejector Pins reduce friction without nicking and flaking.

Royal(R) KNIGHTRIDE(TM) close tolerance hotwork ejector pins are fully hardened throughout to 41 to 45 Rc, and offer ion nitrided surface to 65 to 74 RC for wear resistance. Suited for casting and molding applications, they are precision ground to 5 to 10 RMS surface finish and 0.0003 in. tolerance from H-13 thermal shock resistant hotwork die steel. Heads are hot forged and stress relieved. Pins...

Read More »
Distribution Blocks come with spring cage terminals.

Distribution Blocks come with spring cage terminals.

FLKM-PVB power distribution modules are available in 16, 24, 32, and 48 positions, all with spring cage terminals. Each module is equipped with two potential connections: P1 and P2. Each supply terminal is capable of accepting up to 10-gauge conductor, and each distribution terminal is capable of accepting up to a 12-gauge conductor. There are no external bridging connections to be made on this...

Read More »

Grab Hooks work with CM Herc-Alloy(R) 800 chains.

Cradleless Clevlok(R) Grab Hooks, forged in grade 80 alloy, are available in 9/32 to 5/8 in. sizes, and offer Clevlok style clevis. Hooks have working load limit of 3,500 to 18,000 lbs. CM grade 80 Herc-Alloy(R) 800 chain sling is black finish and/or color coded orange. Tag attached to sling permanently identifies grade, type, working load limit (at specific angle of lift), and registration...

Read More »
Cutters and Inserts provide less than 0.0004 in. axial runout.

Cutters and Inserts provide less than 0.0004 in. axial runout.

Fix-Perfect finishing cutters and inserts are for cast iron milling. Radial negative, axial positive rake angle makes chipload of 0.020 in./tooth possible. Inserts have 4 cutting edges and are offered in 2 grades. K110M is uncoated K10 class grade designed for machining speeds of 500 to 1000 sfm. KC520M is K15 class TiAIN coated grade designed for machining speeds from 600 to 1250 sfm. Cutters...

Read More »
Washers are available up to 12 in. diameter.

Washers are available up to 12 in. diameter.

Washers come in short, medium, and long runs in all sizes between 0.080 and 12.000 in. They are offered in low carbon sheet steel, 5 types of spring steel, stainless steel, aluminum, brass, copper, and nickel silver. Non-metallic materials such as Delrin(R), Teflon(R), Mylar(R), and nylon are also available.

Read More »
Knurled Nuts achieve clamping with one rotation.

Knurled Nuts achieve clamping with one rotation.

Manufactured from steel with tapped through hole and black oxide finish, Quick Release Knurled Nuts suit applications where nuts must be completely removed after releasing operation and refitted rapidly for re-clamping. Nuts are tilted over threaded spindle, brought to straight position for meshing of 2 threads on nut and spindle, and turned a fraction of 1 rotation to acheive clamping.

Read More »
Square Inserts are used for laser leveling equipment.

Square Inserts are used for laser leveling equipment.

Threaded inserts are made from stainless steel bar stock and have outside dimensions of 0.630 in. square. Two flanges spaced 0.065 in. apart allow for mounting to equipment. Parts have internal 1/4-20 UNC thread to accept male threaded part. Dimensions are held to ±0.005 in.

Read More »

All Topics