Fasteners & Hardware

Channel Framing spans bar joists.
Channels

Channel Framing spans bar joists.

ERISTRUT half slot channel (12 gage 1 5/8 or 13/16 in.) comes in 6 ft 8 in. precut lengths with green powder coat, pre-galvanized, and yellow dichromate finishes. ERISTRUT channel framing is available in every strut style with finishes that include those listed above as well as hot dip galvanized, stainless steel, aluminum, and plain. CADDY(R) prefabricated strut/beam clamp model numbers 200RS...

Read More »
Terminal Strip uses spring pressure termination.
Terminal Blocks

Terminal Strip uses spring pressure termination.

Cage Clamp Compact Series 742 PCB terminal block offers choice of either knife disconnect or automotive mini-fuse. It is available with one, two, or three conductors, has pin spacing of 5 mm, and handles wire range of 12 to 28 AWG. Series 742 also offers jumpering capabilities and use of test plugs.

Read More »
Slam Latches offer flush design for small cabinets.
Latches

Slam Latches offer flush design for small cabinets.

No. 1030/1031 Series Finger-Pull Slam Latches are available in key-locking and non-key-locking versions for panel thicknesses of .075 to .875 in. All-metal components are constructed of 300 series stainless steel. Pull-ring housing and mounting bracket are constructed of ASA/PVC alloy material with excellent weatherability, flame retardance, and chemical resistance.

Read More »
Laser Measurement Instrument suits alignment applications.
Aligners

Laser Measurement Instrument suits alignment applications.

AlignMeter® simultaneously measures laser beam position and angular displacement for beams up to 8 mm in diameter. Absolute angle and position can be measured with accuracies of 1 mrad and 1 micrometer, respectively, without having to know distance of source from sensor. Results are updated at 10 Hz. It also measures absolute output power from 10 microWatts to 10 mW at wavelengths from 350...

Read More »
Roofing Fasteners hold down Spanish tile roofs.
Fasteners

Roofing Fasteners hold down Spanish tile roofs.

Collated fasteners for company's Fastening Autofeed Screw Gun fit state building codes that call for two nails or one screw per tile. Fasteners have extra sharp points to pierce roofing glaze, and let builders combine speed of nail gun with fastening capabilities of screws. Combined with countersinking screw gun, they help builders reduce broken tiles. Other fasteners include wood to steel screws...

Read More »
Blind Rivet locks assemblies from both sides.
Rivets

Blind Rivet locks assemblies from both sides.

HuckLok(TM), with shear ring and lock groove, offers up to 1/4 in. grip and eliminates most pull-throughs when joining thin or lightweight materials, such as plastics, composites, and pliable metals. Double locking system secures connection. When used with Huck AK275 or 2025 tools, or any other blind riveting tool of proper pull capacity, HuckLok blind rivets install in seconds.

Read More »
Cable Jacket is PVC laminated.
Shielding

Cable Jacket is PVC laminated.

DVH-20 jacketing is constructed from medium-weight, flame-retardant PVC, laminated to both sides of polyester cloth. Reinforced construction provides resistance to wear, tears, and abrasion. Operating temperature is -40 to +85 deg C. Jacket is available for flat or round cable bundles from 3/8 to 4 in. in variety of colors.

Read More »
Marine Hinges keep hatch doors closed.
Hinges

Marine Hinges keep hatch doors closed.

Positioning-Advantage Hinge and Door-Positioning Hinge hold doors open and closed at pre-set angles without secondary mechanical supports, such as door stay or gas spring. Detent mechanisms allow hinge to mechanically stop at certain angles, thus holding door open or closed depending on how detent is set. Constructed from acetal and stainless steel, hinges meet corrosion-resistance requirements...

Read More »
Primer-Free Threaded Inserts resist galvanic corrosion.
Inserts

Primer-Free Threaded Inserts resist galvanic corrosion.

Stainless steel Heli-Coil inserts, manufactured to military and metric aerospace standards, eliminate need for applying zinc chromate primer. Resin-bonded, fluoropolymer coating creates barrier between insert and parent material. Coating also provides additional lubricity, easing installation in anodized and chemically treated holes and allowing for consistent prevailing torque with screw-lock...

Read More »
Inserts

Inserts press into plastic without melting.

Series 50 through-hole and Series 51 headed, through-hole press-in brass inserts can be cold pressed into plastic without heat or ultrasonic equipment. Inserts have helical knurl that optimizes plastic migration, providing good pull-out and torque resistance. Inserts can be installed with arbor press or fully automated machine into ABS and polycarbonate plastics. Applications include securing...

Read More »
Solder Redefined
Sponsored

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers